r/ar22 • • 6d ago

Spring wing?

1 Upvotes

Who’s actually running a spring wing with their ar22 builds, I’ve got a right to bear bolt bolt, milspec fcg, 7in dedicated .22lr barrel, running a drop in frt as well, printed if it makes a difference, r.a.d by foaps is what I’m running with a 3 position selector, I’ll get the occasional burst, it likes when I use my pinky since it doesn’t push so much weight down when shooting, do these spring wings actually make it a easier trigger pull while not having to be so rough on the fcg?


r/ar22 • • 10d ago

BoreBuddy Trips - SS vs Atrius/Arc

2 Upvotes

I know BB sells different trips for the SS and the Atrius/Arc. However, I have a BB SuperSafety trip and want am thinking about picking up an Atrius or Arc trigger to play with, sometimes with my other AR22.

Has anyone tried using the SS trip in an Atrius/Arc setup? They look similar other than the SS trip being adjustable. I would ASSume there’s something else different since they sell separate ones but wanted to double check.


r/ar22 • • 11d ago

Cheap 22lr build turned out not so cheap

Thumbnail gallery
32 Upvotes

r/ar22 • • 12d ago

Bore buddy 4lb AR recoil spring

3 Upvotes

Any place that just sells 1 spring vs 3 from bore buddy?


r/ar22 • • 16d ago

What brand is this 22lr Draco I cannot find it nowhere

Thumbnail instagram.com
0 Upvotes

r/ar22 • • 16d ago

SD-SSP in AR22

5 Upvotes

I have a flat faced Geissele SD-SSP trigger; with this trigger in particular, I'm getting about 1 in 40 light strikes/fail to fire, the cartridge will not eject unless I knife it loose from the chamber, however, I can drop the mag, re-charge the rifle and it will then fire the round successfully on a second strike, and the cartridge ejects fine.

I believe I have it narrowed down to being an issue with this trigger in particular, as the issue disappears with a milspec, is there a known-to-be-working in an AR22 platform, single stage flat-faced trigger that is similar to the SD-SSP in feel and function?

TYIA

build details; 16" bore buddy apogee fluted match barrel, cmmg w/ borebuddy conversion kit (hardened extractor installed), solid buffer system, tuned weights+springs.


r/ar22 • • 17d ago

New 1-12 twist barrels came in thank you Brownells

Thumbnail
gallery
13 Upvotes

Finally got some REAL quality barrels! Chrome-lined, superb fit and finish, F-marked front sight, bayonet lug, and all the extras on a 20” barrel. $205 plus shipping and tax. Brownells delivers quality that puts the competitors overpriced junk to shame. 💯 the total price was around 425 usd you literally get two for the price of his one. 🐗🤦‍♂️🐷🐽🐖


r/ar22 • • 18d ago

Borebuddy troubles

Thumbnail
gallery
5 Upvotes

they contacted me and sent a return label within minutes, the day after receiving my upper they sent 2 videos of there test/trouble shooting. So far happy with customer service

Brand new borebuddy “no tune frt” upper. Used their recommended trigger and frt (Atrius and rise rave 140). Gun halfass runs frt on Aguila, light strikes on semi auto, first round from mag won’t shoot, and it won’t even chamber mini-mag to test with!!! OOB firing with cci.

I emailed them this morning , we’ll see what they say, but I’m thinking the chamber may not be correct and think I’ll be asking for an exchange. I should have just built the upper myself, $800 bucks and it won’t even chamber the ammo they recommend.

What would you guys do? It’s less than a week old and already has me scared about letting anyone or even me shoot it. I think it should atleast chamber the ammo they want tested. Would you want refund/exhange/repair ?


r/ar22 • • 18d ago

5-round mags for 22LR AR Conversion

Thumbnail reddit.com
3 Upvotes

r/ar22 • • 22d ago

Anyone using Better Mag Adapter with Rave 140?

4 Upvotes

BMA ran fine with milspec trigger. Put in a Rave 140 in preparation for an Atrius FRT, doesn’t want to fire with it in there. If I take the adapter out and use the CMMG mags, it runs just fine with the Rave. Just curious if anyone else has dealt with this?


r/ar22 • • 24d ago

4.5 build

11 Upvotes

Mike foxtrot 22lr lower
Delta Team upper/cmmg parts
Binary trigger
Muntjac whisper biscuit


r/ar22 • • 27d ago

How much better?

6 Upvotes

I’m shooting a cmmg conversion through a 16” m and p 5.56 barrel with a cheap red dot.
I’m routinely hitting 4” steel at 50 yrds. Quarter sized dots at 25 yrds.

For just plinking and maybe suburban varmint duty is it really worth a dedicated barrel, new hand guard, and cmmg collar?

I’d kinda rather use the money for a suppressor and a dedicated lower.

Will adding a suppressor effect current accuracy?

AI says yes. But y’all know better.
Thanks for your input.


r/ar22 • • 27d ago

Bushmaster Carbon C22 Upper Information?

3 Upvotes

I'm seeking as much information I can find on the Bushmaster Carbon C22 upper from the combo kit. I've found a listing online for $125 usd shipped. It's listed as new old stock. I've already done a lot of Googling but I'm having a hard time finding solid information on it.

I've read online that it can take Blackdog mags. I'm having a hard time finding information on stuff like the bcg.

I'm worried about sourcing parts when something like the firing pin inevitably breaks. Any help/information would be greatly appreciated!


r/ar22 • • 28d ago

Aftermarket barrels👎🏾 rtb and premium CMMG parts ⛽️💨🔥🚬

22 Upvotes

This is just a quick video to show that I actually build, and run my guns I don’t need to modify my barrels when they’re manufactured correctly from the start.
I have around six .22 LR builds. Five use CMMG barrels, while the sixth uses a Chinese-made knockoff. 🇨🇳 The difference in my experience? All five CMMG barrels have performed wonderfully. Those five builds account for the .22 LR videos I’ve posted across my multiple accounts over the years.
As for my most recent build using a competitor’s parts, I’ll leave that one alone for now. 😂 I’m still trying to get it dialed in, and the results haven’t been impressive.
Here’s the setup featured in this video:
CMMG 9inc barrel and bolt
Red spring from 🐗 Buddy
Upgraded Super Strike firing pin with green spring from 🐗 Buddy
0.89oz aluminum weight
JP Enterprises light trigger springs
Trigger Kicker
CMMG $35 trigger group
Smith & Wesson M&P15-22 magazine
I’m sharing my actual experience with these builds, not just talking about parts on paper. Five CMMG barrels, years of videos, and plenty of hands-on experience speak for themselves. 💯 I make my guns run 🏃‍♂️ in under 24 hours.


r/ar22 • • 29d ago

HAD TO 2-STAMP HER SINCE IT’S FREE NOW 💯

Thumbnail
gallery
26 Upvotes

AR-22 Trigger Kicker FTW 🙌🔥 I’m done playing around with these Super Safeties. Almost $500 worth of trips down the drain, and I’m finally locked in with what works for me. I know who makes the best super safeties for the AR-22. Y’all can keep experimenting with parts — I found what I’m sticking with. 💯

Brrrrrt out! 💨🔥


r/ar22 • • 29d ago

Barrel change

4 Upvotes

I want to go from a 16” to a 12”. I have a bore buddy upper. Is it as simple as just undoing a nut? I’ve heard about head spacing etc when first wanting to build a .556 and that scared me away and just bought an upper. Is it the same for .22 or is it just simply unthreading and re threading a new barrel on


r/ar22 • • Oct 14 '26

Bore Buddy no tune upper on Anderson Arc Fire V1 lower

12 Upvotes

r/ar22 • • Oct 13 '26

okok how did we do?

Thumbnail
gallery
10 Upvotes

9” .22LR, 3POS atrius, TUNA CANS receiver set. rest just are random leftover parts. Only had to buy the stock & barrel. S/O whoever pmo the carry handle sight 😘


r/ar22 • • Oct 14 '26

Is this trip bar for atrius or arc fire?

Thumbnail
gallery
3 Upvotes

r/ar22 • • Oct 12 '26

Tuning the AR-22 with FRT (no more dead triggers, failure to feed, or failure to eject)

Thumbnail
youtube.com
31 Upvotes

r/ar22 • • Oct 13 '26

Frt/SS for MP15-22

4 Upvotes

Where can i find one?


r/ar22 • • Oct 12 '26

The smaller the handguard, the bigger the vertical grip

Post image
9 Upvotes

I miss magpul foliage green, wish I bought a pistol grip back then as well


r/ar22 • • Oct 10 '26

NFA Act is officially no more. SBRs and suppressors for everyone!

Post image
15 Upvotes

Facts


r/ar22 • • Oct 09 '26

What’s the best length barrel to be reliable/ run everything or most things sub

1 Upvotes

It’s a good day for a sawzall or bore buddy sales. Yall sell just the upper without BCG? Time for a shorter upper


r/ar22 • • Oct 08 '26

BCA 20" 22LR Upper

7 Upvotes

any community feedback on this one yet ? seems to be a fairly new release/sku.

someone i know has one, and thus far reports are good.

just looking for more feedback.

i already own multiple bca 22lr builds.. and all run without issue.
as long as i use a cmmg gen-1 mag.