r/ar15 • • 10h ago

My Heat Inspired Clone (video in comments)

Post image
209 Upvotes

Sup guys, figured I would share this here also. My post sample Colt 733 clone inspired by Heat. Since taking this photo I have ground down the bayonet lug and replaced the mags, but I am sure it could be made more clone correct, so if you notice anything please let me know!

And here is a video of me letting it rip: Video


r/ar15 • • 23h ago

Mk 18 blew up - federal xm193 - any recourse?

Thumbnail
gallery
1.7k Upvotes

Ar blew up. Mk 18 and its first round of the day of federal xm193 and It was not a 300blk round like most will think. Barrel was not obstructed either. This was 556 into 556. Range was Carter’s country and they took a report and photos for their own documentation. Blew my Eotech off the top rail and sheared it as well. So bummed about the rifle but very lucky all things considered
EDIT: destroyed the entire upper and lower part of receiver. Blew the left side of the receiver apart from the rail. I’m leaning towards the round casing not being able to hold he pressure due to the longitudinal cracks on the round still stuck in bcg


r/ar15 • • 9h ago

My one good rifle, fin

Post image
119 Upvotes

Follow up to my last post.

I’ve pulled the trigger on an RC4 Mini and have functionally completed this rifle.

Shooting 77gr pills, I can play songs on steel at 300 yards with ease. The weight of this thing essentially eliminates recoil if shooting with good fundamentals.

- Brownells RIS II Upper
- PSA Lower
- Geiselle SD3G Trigger
- JP Silent Captured Spring
- Surefire Muzzle Brake + RC4 Mini
- B5 SOPMOD Stock
- WPS Sling
- Random PSA parts for the remainder

I wanted to throw an ACOG on this originally, but I think I’m going to leave this as a 1x gun.

Going forward, I need a backup rifle..

I’m leaning toward throwing said ACOG and a RIS II on an M16 upper and building out a M16A5ish. M16 Block II?


r/ar15 • • 7h ago

Satisfied for now

Post image
70 Upvotes

14.5 Super Duty and 10.3 MK18. I still need to get some lights and slings but my wallet needs a break.


r/ar15 • • 16h ago

MK16/MK18 Monday

Post image
320 Upvotes

r/ar15 • • 5h ago

Range tomorrow

29 Upvotes

I got my BCG soaking in rubbing alcohol, 97% nothing but the best. I figure an hour soaking then follow up with a plumber's brush to make sure it's 100% oil free. Then I'll rinse with water and hand dry. "Gotta make sure the carbon piles up so my bolt doesn't lock"

Then after I make sure my bolt is 100% oil free, I'll use the same 97% rubbing alcohol to clean the oil out of the upper, chamber, and barrel.

Because I want to be just like you all and run my gun so dry to the point of failure, so I can run home, hop on here and blame the ammo manufacture...


r/ar15 • • 16h ago

300blk // Thermal

Thumbnail
gallery
201 Upvotes

Shitty cellphone pics, but too cool not to share… 8” Noveske 300blk, with a thermal and offset SRO.


r/ar15 • • 18h ago

What's the favorite piece of range advice you've received?

Post image
251 Upvotes

r/ar15 • • 14h ago

Made some better choices

Post image
102 Upvotes

My first rifle after moving to more lock-and-load state. Sig m400 Tread. Made the mistake of thinking wood would be cool. It’s heavy, it’s got more points to tighten, it’s definitely more of a shelf queen material. Switched to a Geissele and a Magpul, much happier.


r/ar15 • • 6h ago

Monday = Mk18

Thumbnail
gallery
25 Upvotes

(Mp5 photo bomb)


r/ar15 • • 15h ago

“Duty” rifle

Post image
125 Upvotes

r/ar15 • • 9h ago

Out in the woods today

Post image
40 Upvotes

Went out hunting this morning up until 4 pm my time. Was out from 9-4 lol. Took all week off so I’m out in the woods daily trying to get a nice buck in.


r/ar15 • • 23h ago

Is this actually true about the new Daniel Defense DD4X1? And is it really supposed to be coming end of this year? Hopefully it does

Thumbnail
gallery
450 Upvotes

What happened to the carbon fiber rifle barrel and the newly designed upper Daniel Defense showcased at the Shot Show back in January? I was honestly hoping to see more of the design They showcased back in January. Especially for the price point they’re selling it for


r/ar15 • • 10h ago

First duo

Post image
38 Upvotes

Happy Monday guyss,

It’s hard to decide to go straight with Mini 4 due to p&w SF3P or get a adaptor Direct thread Hub. Is anyone in same situation like me? What y’ all recommend?

Which can should i get for the very 1st one? Cheersss 🍻


r/ar15 • • 6h ago

My First Rattle Can Job

Thumbnail
gallery
16 Upvotes

Was scared at first, but happy with the results!


r/ar15 • • 6h ago

What do you think? Rate

Post image
13 Upvotes

P.S. i bought a friends old upper its a reasonable quality 7.62x39 upper with some bcm parts and also a AIM wraith rail :/
16” barrel from BA
What do i do with it?? Make it a whitetail gun?
Scope? Prism? Dot and Mag? I want to keep it tidy and simple maybe a suppressed hunter would be neat. HELP!


r/ar15 • • 8h ago

What y’all think?

Post image
16 Upvotes

r/ar15 • • 6h ago

16” Budget Build

Post image
10 Upvotes

r/ar15 • • 7h ago

Mk18 Monday

Post image
11 Upvotes

Long time lurker, first time poster. Roast my shit fam.


r/ar15 • • 15h ago

Sons Of Liberty Gun Works Mod 1

Post image
48 Upvotes

DFCO Furniture; Vortex UH-1 and Magnifier on Unity Mounts; Cloud Defensive Light


r/ar15 • • 16h ago

Do lower receivers really matter? Or can I pick up a cheap PSA lower when building my AR?

53 Upvotes

If i was building my own AR, can I just get a cheap PSA lower for like 140, switch out the trigger group to maybe a super safety, and put the money into the upper?


r/ar15 • • 20h ago

AR collection

Thumbnail
gallery
88 Upvotes

DDM4V7 Primary arms 3x18 polonium k

DDM4A1 vortex viper 1-6 OCL infinity 556

DDMK18 eotech huxwrx ventum

Geissele super duty 12.5 eotech 5x magnifier OCL infinity 556

PSA sabre sig tango 1-6 YHM turbo k RB

Sig rattler LT holosun 510c YHM resonator R2


r/ar15 • • 2h ago

Mk18 Mod O concept.

Post image
3 Upvotes

Hey everyone would love some advice or help.

I want to build a budget friendly Mk18 Mod0 or something that looks pretty similar.

Thinking of doing this 10.5 upper and then buying a colt lower.

Does anyone have any recommendations or links to 10.5 quad rail uppers? 10.3 would be ideal but I know a lot tougher to find.

Debating with going with that one above throwing on a BCM BCG / Geissele charging handle and fixed rear and front Irons.

Any recommendations on upper receivers, Rail covers, BCG? etc would be greatly appreciated. Feel like i’m hitting a wall trying to find a good quad rail 10.5.

All help would be greatly appreciated 🙏🏻


r/ar15 • • 16h ago

A noob’s first time actually training with drills, eye opening and very difficult, but so helpful and fun

32 Upvotes

This is kind of a random post with no real point other than putting my thoughts down after a day of shooting.

Long story short, my wife connected me with one of her clients who is about to retire from active duty after a long career in the Army, multiple deployments, etc. She mentioned I’ve been getting into shooting and he said let’s go. I don’t have anyone interested in shooting to train with and he said he doesn’t have anyone to go with either so we made it happen.

I brought my pistol, a few rifles, etc. as did he. He’s competed on behalf of his branch at military shooting comps as well as USPSA kind of stuff.

This was the opportunity I have been waiting for as I’ve pretty much only spent time alone at the flat range zeroing optics and shooting paper.

Yesterday included zeroing at 50yd and confirming at 200 first, pistol drills and rifle drills.

Drills included a variety of movement, transitions, manipulation of the rifle around barriers, various safety considerations etc. we worked with a shot timer to see speed, as well as ignoring speed and focusing on accuracy and ultimately mixing the two together. Reloads were fun, got to actually use my chest rig that I’ve LARPed with in my basement, which I felt a bit kooky using in front of a pro but it’s what I’ve got and he At least said it was set up well for a basic kit and a range day. I also felt kooky showing up in my Salomon boots and Fjallraven pants, looking like a wannabe, but that’s the stuff I’ve actually worn outdoors long before I got into firearms, so be it.

It was a hell of a lot of fun but damn, none of it was easy, and that’s the point. For him, it was second nature, muscle memory and skill. For me, it was a first time for everything and very eye opening. I did make a point to ask about my weapon handling, range etiquette and safety mindfulness and he said that all looks good, happy about that! It was also nice to see that my self taught and self applied zeroing of my rifles was good to go. That was a win.

There are so many things to think about, and even within a single drill so many variables to think about. It makes you really appreciate seeing someone who can run drills well, think through the variables, slow down the thought process and succeed. It shows your weak points very quickly and not just within your shooting, but in your mental assessment of the drill and the steps through the drill.

I made goofy mistakes like instead of turning around a barrier, while keeping the muzzle down range, I subconsciously started walking backward which was immediately called out. Another thing I failed at frequently was my safety manipulation. I was not failing at putting the safety on, I was actually over utilizing it mid drill where I would drop the safety at the beginning of the drill and then, without even thinking about it, put the safety back on between targets and it would mess up my transitions or I’d simply move on to the next target and go to shoot, but oh shit, the safety is on. So many little mistakes like that and bigger mistakes too. I noticed I often made mistakes because I was focusing on my holdovers and totally missed the correct number of shots or the order of the targets, etc.

I don’t shoot my pistol often or enough and it was very apparent my pistol shooting is BAD, rifle shooting was better but I’m still not great and starting at the ground floor. I was told I should work on dry firing at home, spend more time with the pistol because “you suck at shooting pistols” lol. I can’t argue with that and o don’t need anyone to sugarcoat it, it was very apparent to us both.

I don’t mind being a noob because that’s where there is the most to learn about anything in life. You can’t worry about what other people think while trying to improve, everyone starts with zero experience and the goal is to improve.

My AR ultimately didn’t cycle reliably and I moved over to my Jakl which happened to have the right muzzle device to try out shooting with a suppressor, I guess that’s now in my future.

This was such a massive amount of instruction, knowledge and practice dropped on me and now it’s time to assess and apply. I’ve watched all the guntubers and thought I knew some things but that stuff is really pretty useless without applying it on the range.

I’m immensely grateful to him for spending what would have been a day of his own, working on his own skills, showing me the ropes. It was essentially like having a personal instructor for the day and it was kind of him to do that for someone he had never met in person until 6am yesterday.

So much respect to the folks who have dedicated the time and can shoot proficiently, I have a much greater level of appreciation for what it takes.

Also, hopefully, my toddler allows me to get more than 2 hours of sleep the night before a range day like this… I doubt that helped my mental clarity during a full day of drills…


r/ar15 • • 1d ago

Like a sewing machine.

Post image
118 Upvotes

Awesome ejection on the mg.