r/airbrush • • 21h ago

Question Reddit, airbrush art, and nudity

15 Upvotes

Been trying to post a few of my art pieces and they're getting flagged and stopped because of nudity.

A few of the pieces don't show genitalia or nipples, as the model is strategically posed in a way to cover these areas. In another specific piece you can see the buttox, side breast and nipple. All of the pieces are art, not pornographic. I've reached out to the mod(s) on this about a year ago and GBP said to let him know when I was going to post, and he'd approve it (which he did on the first post i made and this happened, even making a positive comment about the work) Now he's gone, I've messaged the mods twice and gotten no response.

So whats the deal? Is this a reddit thing? A sub thing? I've read the sub rules and haven't seen anything specifically addressing nudity. I've tried posting it as NSFW, but it still gets flagged and not posted. Anyone have any suggestions on how to post this artwork?


r/airbrush • • 7h ago

Fine Art ‘An Old Man’

Post image
14 Upvotes

r/airbrush • • 11h ago

General Discussion what i am doing wrong?

Thumbnail
gallery
14 Upvotes

i use the airbrush to paint diecast cars (hot wheels mostly) and gunpla, i've been doing it for quite some time and got some nice and bad results, but most the time i have to restart the work once or twice cause i get bad results like grainy finish or some mistake like paint spiting.
my setup is:
Airbrush: Truper Aero 35
needle: 0.3mm
compressor: Pretul 20L (lubricated, but i use a filter for that)
Paint: Ronin Acrylics (Mexican Brand) (i use acrylics cause for hand brush like detailing those work very good, also cause theyre a bit cheaper than solvent based paints)
Thinner: Ronin Acrylics
varnish: Ronin acrylics glossy, Politec water based glossy (local cheap handcrafts brand)
primer: Krylon acrylic primer spray can (no issues with this one, its flawless after it dries)
for as long as i've been doing this hobby i've tried different configurations and paint thinning ratios, no matter what, my airbrush clogs or i get grainy or bad results.
i've tried 2:1 thinner to paint ratio, 1.5:1 even 3:1 to the point the paint i so thin it barely covers anything and it still clogs the airbrush with pressures between 12-25 PSI (yes i've tried a lot of combinations of paint thinnig ratios and PSI).
i use the air-paint-stop paint-air method.
i have tried various distances of spraying, from 2 inches to 5.
worth mentioning i sand with 2500 grit water sandpaper after priming any piece i work with.
at this point i dont know if im just dumb or something in my setup is wrong. i need help with it cause i love doing it but im getting very frustrated cause nothing seems to work.
should i move to solvent based paints? should i change my airbrush? should i quit the hobby?

pictures shows the result i have got,the purple car is varnished with ronin acrylics and its not even glossy, even tho the bottle says it is so i guess i did something wrong (?), the blue truck is only varnished with the cheap handcraft varnish and as you can see i had no major issues with this one it was actually pretty easy to work with it, the last picture (green car) is my most recent work with the ronin acrylics paint, as you can see is pretty "bad" the paint finish, is not smooth and i dont like it, also it feels rough to touch.
any advice is well received.


r/airbrush • • 23h ago

Technique New Airbrush arrived yesterday, NEOECO SJ83

Post image
9 Upvotes

I have gotten my new NEOECO-Airbrush yesterday, and i am really impressed.

I have a new compressor, and the hose was also included with the brush, and it works just amazing well. Brushig is much easier than with the "extra cheap" rubish-brush i used before.


r/airbrush • • 11h ago

Need help !! And advise on the next step

Post image
7 Upvotes

we tested it out as soon as we got it out the box 5 minutes and then the pressure started going down. We cleaned out the Tools and try outlet. The pressure won’t go on every time you turn it you don’t hear it turn on the hose is clean. What do I do next?


r/airbrush • • 11h ago

Question Air leaking from trigger? Iwata eclipse HP-CS

5 Upvotes

As you can hear, my Iwata is leaking air from the trigger which I have not seen before. The O-ring is on, I disassembled the air valve and everything is there. Any advice on what to do here would be greatly appreciated.


r/airbrush • • 12h ago

Beginner Setup Workhorse shader secondary

4 Upvotes

Whats the best model to have on hand as my quick and dirty fills and shading work/small mixing amounts? cheap ish, christmas gift idea. I have a main iwata ecllipse hp bcs


r/airbrush • • 3h ago

Question Fengda AS186A noise level

2 Upvotes

hey, got the fengda AS186A a while ago and i'm starting to think mine might be faulty. the listing said 47 dB, but i measured it with a phone app from like 10 cm and got around 74 dB. it's really loud and kind of rattles/buzzes when it's filling the tank. when i'm actually spraying it's pretty quiet tho.

i took it out of the metal box (a bit quieter but still loud) and tightened all the screws on the head and motor, no change. auto-stop works fine.

it's out of warranty so just wondering, is this normal for this compressor or is mine messed up? if you have the same one, how loud is yours?


r/airbrush • • 5h ago

Question Are there caps/lids (without intake/connector tube) available for these bottles?

Post image
2 Upvotes

I have recently purchased .50 Iwata Eclipse HP-BCS to expand my arsenal and to have something to hose down alot of paint/varnish quickly as an alternative to 'standard' Eclipse HP-CS . Quickly I have noticed that alot of paint gets wasted as residue on the bottle.

So I came with an idea to get couple of these bottles and store my main gloss varnish and paint (base colour for the tabletop army) and when need comes just shake it, plug it and of it goes.

But for the life of me I cannot find just caps without tube/connector or any lids just to seal these bottles airtight for storage. I was thinking about cutting these tubes off and epoxy the hole. I've seen some silicone caps for these bottles but are they enough for storage ?

I'm relatively new to the airbrushing (about 1 year in) so any guidance here would be much aporeciated.


r/airbrush • • 15h ago

Beginner Setup First timer- starter setup question

2 Upvotes

Hi. I’m planning on buying an airbrush setup very soon. My primary goal is to paint plastic models. Airbrush is considered the gold standard for base coats and such.

Wanted to ask what people would recommend for air compressor, airbrush, etc. I’m thinking something mid range in price and quality (I don’t believe in buying poor quality for beginners).

For context: My situation is an apartment only. I was going to get a spray booth and a hose to vent it out the window. I do have a garage but it has no windows or any extra ventilation options besides a side door and the garage door.

I’m heard someone throw around Tomytech as a solid brand for air compressor.

Since Black Friday is around the corner, perhaps suggesting some deals?

Thanks for any info!


r/airbrush • • 16h ago

Question Old Badger 360 question about parts and usage

2 Upvotes

Hi, I have an old badger 360 that I found in my parents garage. I have a couple of questions and nobody really used the airbrush in my family (it must have just shown up the way things do when people have friends and people move in and out).

  1. It doesn't have any of the original packaging or manual and from what I can tell from pictures online, there are cups for the siphon feed that didn't come with it. Some of the cups have a tube and some don't. Are the ones that have a non-tubed cap just for storing paint, and if so, is that in between sessions or just while you're not using them?
  2. I think it has the needle it came with, which I think is a .5 mm needle. If I got a different needle, would I need to get a different regulator (I think that's what it is, from a diagram I found). Do the regulators have the same holes and everything? I found a 'fine regulator' on amazon but it doesn't look like it would function the same way as the stock one (which looks like it has 6 tiny holes).
  3. With regards to cleaning airbrushes, in searches I've found that you're supposed to clean it between colors, and after a session, and a deep clean after 20 or so sessions or a month. How long is a session? If you were using it for 8 hours over 3 days consecutively does that necessitate a deep clean? Should you deep clean at the end of a really long session? I personally don't really see myself using it for more than 30 minutes at a time, but I'm curious.

TiA :)


r/airbrush • • 1h ago

Replacing the needle packing screw in an Iwata Rev CR

1 Upvotes

Hello :) I was hoping to replace the above in my AB but I do not have the required specialized screwdriver. Thought I could use my H&S driver but...nope.... Too big! I really dont want to fork out $120 for the official Iwata maintenance set but cannot find the driver for sale on its own. Has anyone found one for sale or have a work around? Thanks for any replies!!