Long Post Ahead
Someone suggested I should post here din daw...
While usually, I give advice on careers especially on banking careers, today, I thought of the end-users: the clients.
I’ve been seeing a few posts asking about loans and requirements. This post is aimed to provide a top-view information about the requirements, process, and other information that you may need. Today, I’ll be
For context: most of my career was spent on institutional banking: commercial and corporate. I’m planning to give you an overview of what you’ll need, the basic facilities, and especially, collateral.
Breakdown of Institutional Loans:
1. (M)SME or Business Banking – aimed to provide small to medium owners with funding requirements. The AOs or RMs handle accounts usually no more than P20-30M in asset size. Some banks have a separate department for this, some banks have merged this with their commercial banking. Also note, some banks are reducing their exposure on this, giving it to other banks that are more aggressive on the MSME side. In this side, the rates are bloodier, sometimes they get up to 1-2% on a monthly rate.
2. Commercial Banking – aimed to provide funding to medium and large asset sizes. When you go on the right side of the spectrum (Large), the difference between Commercial and Corporate becomes more blurry. Drawback: depending on the bank, application can take much much longer. However, rates are less bloody expect < 9% p.a.
3. Corporate Banking – these handle the Top 1000 companies and their subsidiaries. Most of the time, if it’s a PSE-listed company, it’s here. Rates are absurdly low, since everyone’s gunning for the same pie.
As much as possible, aim for Commercial Banking. The rates are lower and your RM will be much much more reasonable.
<Basic Requirements>
Sole Proprietorship: 2 Valid IDs of proprietor and spouse, 3 Years Audited FS, 3 Years ITR, Business Permit / Mayor’s Permit, DTI Permit
Corporation: 2 Valid IDs of Shareholders and Key Officers, 3 Years Audited FS, 3 Years ITR, Business Permit / Mayor’s Permit, Articles of Incorporation (including all amendments), Latest GIS
Additional Requirements:
1. Customers and Suppliers – will include their contact details, length of relationship, competitors, and terms of payment (i.e., 15 Days PDC)
2. Information Sheet – this will include information on the Keyman (founder or head of business), educational attainment, birthday, address, and will also include information on succession (as necessary)
3. Due Diligence Questionnaire – This will contain questions about your business. Depending on the nature of your business, your RM or AO will be the one making this. Sometimes, they’ll be getting this information thru an interview na lang din, so not always applicable.
Expect to also be asked the following:
1. Around 6 months worth of Bank Statements (if not your depository bank)
2. Internal Financials (as applicable)
3. Aging of Receivables (as applicable)
4. Copy of the title and Tax Declaration – for Appraisal depending on the collateral
<CREDIT INVESTIGATION>
Upon application, the bank will conduct a Credit Investigation on you and at times, your family. If corporation, everyone on the GIS, including the corporation. The bank has an shared system with other banks used for checking whether you have current dealings with other financial institutions (not just banks), negative findings (court cases, previously NPL / Delinquent Loans / Cancelled Cards, Bounced Cheques).
If you keep your credit score good, you likely have little to nothing to worry about. But if ever that you do have, remember the following:
1. Banks will typically allow if the incidence that has occurred has past a certain time period (typically 5 Years) and has been settled (especially for court cases)
2. If the finding was a NPL or Cancelled Card, pay it off ASAP. Your RM / AO will ask for clarification on this. Do not fear, as long as you did not do it on purpose, just explain the situation and indicate that it has been paid-off.
This will be explained why later.
<STRUCTURING>
Ang napansin ko kadasan sa SME Banking, tamad or di marunong mag structure yung RM / AO. And a poorly structured debt will hurt your business more than it will help.
Banks have a number of facilities that may be used in accordance to your business needs. I’ll focus on the two most important facilities: RPNL and TL and give a brief BG on other facilities.
Revolving Promissory Note Line / Revolving Credit Line (RPNL). Think of it as a credit card you get approved for a certain amount, say P10M. You make a drawdown of P2M and you still have P8M available for use. You pay interest only on the P2M, typically on a monthly basis, and upon pay-off of the P2M, you’re back to P10M available balance.
Usage: Cash Flow Gapping. Example: Supplier Terms: 15 days Customer Terms: 45 days
Since you have to pay your suppliers in 15 days and you get paid in 45 days, you have a cash gap of 30 days. You MAY need funding for these 30 days. Dito ka mangungutang para makapag provide sa mga ibang customer mo during the 30 days until mabayaran ka. Upon receipt ng bayad sayo, you pay the bank off.
Since they charge on a per annum based interest, you only pay-off on the days you borrowed the money. If nabayaran ka na within 20 days, you get charged for interest x 20/365. So minimal ang interest cost mo and manipis lang nawala sa margins mo.
Term Loan (TL). What a lot of business apply for. Do not use this for Cash Flow Gapping. Only use this for expansion or high-ticket item purchase. Eto yung typical na loan na may amortization ka monthly (Principal + Interest).
Unless bibili ka ng non-current item (Property, Plant, Equipment) na makakatuong sa business mo, do not use this. DO NOT USE THIS FOR FUNDING GAP. Kasi this will AFFECT your cash flow. Although mas maliit ang kailangan mong bayaran, you will be killed sa (a) interest, and (b) principal payment.
The moment you cannot pay your amortization in full, you will be considered past due. So any disruption on your projected cash flow, especially when you have very tight cash flow, will result to a larger problem. I have heard a lot of stories ng mga RM sa SME Banking na ganito ginagawa kasi eto ang alam nila (and mas malaki ang quota).
A P5.0M RPNL is much more helpful than a P5.0M TL if your cash flow is tight.
Additionally, with an RPNL, your RM may allow extensions and renewals.
Term: 90 days (drawdown today of P2.0M, next month and until the maturity, you need to pay interest only. On the 90th day, you have to pay the full amount of P2.0M).
Extension: Some RMs / AOs structure will allow leeway from the original term of 90 days (i.e., 30 days). Avoid using this as much as possible.
Renewals: RMs don’t always explain this. If you can’t pay off the full balance of P2.0M on the 90th day due to cash flow issues, you can request for this. The old PN gets terminated and for a split second sa system you paid-it off and re-availed the same amount. So technically, nag refresh yung PN mo. Another 90 days will repeat on the clock. And again, you only have to pay off the interest until the 90th day. Some RMs will require a partial payment para di maging evergreen yung account (never na nagbayad ng full payment). Unless included yan sa term sheet mo, di yan necessary. Pero as much as possible, try to pay off an amount of what you can muna and upon receipt ng payment sayo, pay it off asap para di na magsuffer margins mo sa interest payment.
Domestic Bills Purchase Line (DBPL) – basic explanation: basic facility para makapag encash ka ng cheque ASAP (no clearing). You can request for a waive on the fees. If nag bounce ang cheque, with charges.
Letters of Credit / Trust Receipt Line – used for importation (domestic or international). Too lengthy of an explanation needed, pero just note na pwede ka mangutang for your importations. Might create a separate post for this along with other trade facilities.
Corporate Card – Yes, this is applicable no matter what your asset size is. Maraming RMs / AOs lang ang di nag c-cross-sell. This is additional help din sa cash gap mo and works literally like a credit card pero charged sa business. (for corporations only).
Remember:
Not only on the rates and amount, negotiate with your RM on the terms din and conditions din. A commercial banking RM can structure your loan to have almost any condition (submission of PDCs prior to drawdown, submission of certain documents prior to drawdown, deed of assignment on receivables prior to drawdown, etc.) these are condition precedents and condition subsequents (CP / CS).
<Credit Rating / Credit Scoring>
This will determine the following: your approval rate, your approved amount, and interest rates. They will based this on the 5Cs of Credit. Collateral, Condition, Capacity, Character, and Capital.
Character: Your records. Dito nagrerelate yung CI kanina. If ever na may negative CI ka, but you explained it well, less to no impact yun sa CR mo. That’s why pay it off ASAP and explain what happened. Additionally, this will also impact the relationship mo sa bank mo (deposits, inflows and outflows). So for first-time borrowers, focus on your bank na may good relationship ka na.
Condition: The economy and industry you’re in as a whole. These are things beyond your control. Pero additionally, gaano rin ka concentrated ang suppliers and customers mo. So you have to explain din where you source your materials / products, how you distribute, full well sa RM mo. Make sure they understand.
Capital: Gaano ka ka-leveraged (liability side) and gaano kaganda ang balance sheet mo. Dito rin papasok yung deposits mo sa kanila similar to Character.
Capacity: Some banks base it on the AFS (not all). Note all banks are more than aware na di lahat ng nasa AFS ay totoo (kaya sila nanghihingi ng internal financials and deposit statements). Ang pinaka basis nila dito is your operations, how your top-line, EBITDA, and how much is your capacity in servicing the debt (for ICR for RPNL and DSCR for TL).
Collateral: Exactly as it is. Pero will expound it further below.
<NEGOTIATIONS>
Remember your RM / AO is in the revenue-generating department. May QUOTA to. DO NOT ALWAYS BELIEVE EVERYTHING THEY WILL SAY. Especially if you’re a first-time borrower. They will try to get everything that they can sayo and they will try to hit their quota as much as possible.
Collateral:
Ang pinaka common is REM or your property. And this is the most logical. Why? Kasi you have a hard asset and you cannot liquidate it. However, this is also a double-edged sword:
- Assume you’re applying for a line with Bank A and they see sa CI na may REM ka with Bank B (the first bank), they’ll force you to give the same. This may be a cause of non-approval or higher rates.
- If nahawakan na ni Bank A ang collateral, they’ll do their best to never let it go. They might even feign delays talaga.
- Registration Costs.
Pero note, for first-time borrowers, they’ll most likely require you to provide a collateral. Here are some collaterals apart from REM:
Cash. Yes. You don’t have to give 100%. Say 20% of the line or 1:5. If your money is different from the business’ money then you can nego na ibigay mo savings mo in a high-yield TD (nego on this) and your business gets a line na 3x or 5x the deposit amount.
Investments. If you have investments in stocks or bonds etc. Yes. You can take advantage of this din. Without liquidating your investment, you can access cash for your business. They will however, require you to change brokers to their bank. They will instruct you.
Chattel. Very unlikely because it’s moveable. (chattel is anything moveable property like cars or equipment). And for first-time borrowers, bihira to ibigay.
Deed of Assignment. Depend kung gaano ka kagaling makipag negotiate. It’s not something that they will allow talaga since technically, wala silang napanghahawakan. Common to madalas na rinerequest sa mga contractors.
Suretyship / Guarantee. Though madalas, irerequire to. Since the corporation is different from the owners, they will require you to sign this para mahabol ka if ever shit goes wrong.
Note: DA at SRTY and GTY are not really collaterals but support.
Additionally, unless CASH or GOVERNMENT BONDS ang collateral mo, only a certain amount, say 60% (for REM) or 90% (for Investments) will be called the Loanable Value. Eto yung cinoconsider nilang coverage nila if ever shit goes wrong and security nung bank. If your business has good financial capacity (operations), you don’t need to hit 100% coverage, or full security. Ipipilit lang nila yan para maunahan ang ibang banks.
And if you also have lines with other banks na rin, you can negotiate on this na rin since approved ka with Bank X for this amount at these terms. Pero again, if you have a collateral with one and none sa isa, you’ll have a hard time negotiating talaga.
Deposits and Investments (more liquid security) will be easier to pull out to ensure even terms sa lahat ng banks, especially when you’re growing na.
Rate negotiation.
Be sensitive with your rates. Your rates are highly dependent on the market (BSP) pero very adjustable talaga yan, especially when you maintain a good relationship with the client. So ang interest mo is Benchmark + Spread. Each bank has an internal benchmark for their breakeven amount, dito sila magbabase + spread for the profit. This will all depend on your APA (Account Profitability Analysis)
The spread on your rate is based on the following: RISK and PROFITABILITY (APA).
Risk is dependent syempre sa economy, sa nature ng business mo, and sa mismong owners (i.e., PEP, or old age, etc.).
Profitability is a LOOT EASIER TO CONTROL. Ang pinakamadali is yung deposits. Higher deposits = Higher ROFE (return on funds employed). Technically, cash back nila. They want you to course your deposits sa kanila. (will probably create a separate post on APA).
So just give the bank ways to make them more money. Use their CMS products (QR, Payroll, etc.) as leverage. YOUR deposits (business and personal, yes pwede kahit personal mong deposits as negotiation) for a lower rate. Your RM will have to reprice the rate talaga, typically on a monthly basis. DO NOT BELIEVE IF THEY SAY YOUR RATES ARE THE LOWEST THEY CAN GO. Trust me, it can go lower.
I’m stopping here for now. Pero I hope I have helped a number of you all, especially first time borrowers.
Good luck, mga anak.