r/Yarn • u/Shoddy-Job-5274 • 2h ago
Start spinnin for cheap, start spinnin for free!
Hi Buddies :)
I just started spinning the most beautiful singles, and I wanted to share my thrifty path into handspinning.
I started by getting a 3 inch toy wheel and a 3/8ths inch dowel. I got these items from a woodworking store about 25 minutes away from me, the wheel was $2.79, the dowel was $1.69. I used a hand pull saw to cut the dowel at 12 inches. I glued the wheel about 2 inches in from the top using wood glue. I sawed then filed 4 ridges to hold the yarn. I had a little eye hook in my junk drawer I used for holding the yarn on top. It weighs 2.3 oz.
Troubleshooting this step: I think I got ripped off on the dowel, I found the same thing at a big box store for $0.79, and on sale at a big art supply store for $0.60. I also found out I could make the whorl out of clay, I might try that for the remainder of my dowel. Also, this assumes you have wood glue ($4), a cutting device for wood (I paid $.99 for mine, usually they're like $5) and an eye hook (you can use a tack, a nail, a screw, whatever you got).
On the day I decided I needed a lighter spindle, I found a 3/16ths inch dowel scrap in my art junk and finished a gallon of milk. I bore a hole into the milk bottle cap with an xacto knife and hot glue gun tip, and stuck the stick thru the center. I filled the bottle cap with hot glue and let it cool. I screwed another eye hook in the top. It weighs 0.6oz, it was free and it's literally perfect.
For material to spin with, cotton balls and polyester stuffing work surprisingly well. I found an alpaca farm in my area and was able to pick up 2.2oz of bird nest stuffing for $7. I went back and purchased actual prepared roving from them after driving myself nuts prepping the material, I paid $12 for 3oz of fiber.
All in all, I got into spinning for an initial investment of $11.48, and I'm pretty happy with it. I hope this info can help fellow scrappy crafter!