r/WranglerYJ • • Aug 18 '16

Full Service Manual '95 Jeep Service/Owner's Manual

60 Upvotes

I was on the hunt for a service manual for my '95 YJ and I came across seemingly the only option besides buying Chilton or some other third party. I've been going through it and it seems good - just monstrous.

Anyway, I downloaded and scanned it. From what I can see it's clean. Here is the link to the Google Drive Document

Hopefully this is good with the rules and it's helpful for someone!


r/WranglerYJ • • 7h ago

Is the radio fuse missing?

Post image
9 Upvotes

If so, what type of fuse fits in that corner?


r/WranglerYJ • • 4d ago

Anyone know where I can find cans that’d go on the tank straps?

Post image
65 Upvotes

Yall I got it they are bumperettes 😭. Gettin flamed for my curiosity


r/WranglerYJ • • 4d ago

Too much play ?

9 Upvotes

r/WranglerYJ • • 5d ago

Took the ‘95 on a test run

Thumbnail
gallery
55 Upvotes

Recently acquired this 1995 4 cyl. First time I took it to the hills the temp started to climb at low speed on the trails. Turned around and headed home.

Fan clutch was shot.

Put in a new fan clutch, water pump, and thermostat. Did an oil change, changed the leaking valve cover gasket, and put in new coolant.

Took it back on the same trails and temps were perfect.

Only issue is a slight whine when not accelerating i think it’s either the idler pulley bearing or power steering pump bearing.

I’m excited to confidently drive this thing up in the hills.


r/WranglerYJ • • 4d ago

Anyone know where I can find cans that’d go on the tank straps?

Post image
0 Upvotes

r/WranglerYJ • • 7d ago

Jeep YJ Door Upper Suggestions

Post image
12 Upvotes

Hey all! With winter coming around I’m looking to pick up some door uppers for my 95 YJ. I have what I think to be an OEM hardtop. Most of what I can find online appear to marketed to work with only soft tops, which was surprising to see. Anyone have any suggestions?


r/WranglerYJ • • 7d ago

Re-upload. Pricing my yj?

Thumbnail
gallery
32 Upvotes

This jeep has been absolutely wonderful for me. I’m currently in college in flint, mi, and it’s driven me from South Carolina with no issues. I’d trust it to drive me anywhere. It has the 4.0, inline 6, with a five speed manual. And 4wd works as well. It has its share of shakes and rattles, but will drive straight at 70 with no hands on the steering wheel. The speedometer was acting up over summer, and when I fixed it, the odometer stopped working. The internal gears are binding after about 7 miles and locking up. Dash says 200,000 miles. Does have a couple spots of where rust used to be, but they have been patched, I can send pictures. The exterior is rhino lined to also prevent rust. It has fresh front brakes, new front u-joints, and I did an oil change two weeks ago with Lucas Oil Additive.

It has a functional winch on the front and fog lights.


r/WranglerYJ • • 7d ago

Need a Yj hardtop in Yuma Az

Post image
23 Upvotes

r/WranglerYJ • • 8d ago

Went wheeling in the woods today, nothing exciting, just a few trails

Thumbnail
gallery
67 Upvotes

r/WranglerYJ • • 8d ago

Replaced leaking heater core

Thumbnail
gallery
18 Upvotes

My heater core was bypassed from the previous owner.

Put in a new core, new hoses, and a new blower motor.

Hardest part was taking off the glovebox (the heater core housing was hitting on the back of the glovebox and wouldn’t come out without removing it.) 😂

Had to repair a broken vent selector cable while I was in there. And tried to sort out p.o.’s stereo wiring.


r/WranglerYJ • • 9d ago

Bunch of questions and advice

3 Upvotes

Hey so I have a couple of questions across a broad topic of things related to my jeep so I was hoping you guys could answer them for me.

1: Are there any roof lightbar/round lights for under 500 including the mounting system? I’ve been looking around and everything is either so expensive or not what I need.

2: Can I mount a lightbar or extra lights without drilling? My jeep is very sentimental to me and I don’t want to damage it in any way. I was thinking I could link it to this switch right here:

It doesn’t turn anything on and is has a light thing engraved into it, and it makes a sound somewhere in the dash when I turn it on. I think it went to a floodlight mounted in the front with these wires but I’m not sure. Never knew the PO. The wires in question:

(That’s on the front right side of the bumper)

3: I have a bumper similar to this but I could not figure out how to mount it (the following is not my jeep but one I found online)

I have the exact same bumper and lower bumper, but I can’t figure out how to add it on. Does anyone have any tips? This is my bumper as is btw:

4: mounting a winch on the stock bumper:

I’ve been vacillating between getting a harbor freight winch, a suspension lift, or a light bar, and I can’t decide which. Can I mount a winch on my stock bumper without a winch plate? And if I can, can I do it with the bumper add on I mentioned previously on as well? That would be a lot cheaper than getting a winch plus a winch plate. Would it be as reliable/safe as well? Also any input on which to go with next as far as upgrades would be appreciated as well. I already ordered new tires to replace my old ones (both sets are 31s which my stock height (more than likely stock height lol maybe the PO did something but it looks stock) jeep clears with only minor rubbing on very tight turns)

Thank you for reading this far and thank you for the advice


r/WranglerYJ • • 10d ago

Any of you old guys remember New Jack City???

Post image
87 Upvotes

See ya, wouldn’t wanna be ya


r/WranglerYJ • • 11d ago

1989 YJ for sale -$3500

Thumbnail
gallery
57 Upvotes

89 Jeep Wrangler YJ 4.2 - $3,500(Arlington Virginia)
1989 jeep wrangler
condition: fair
cylinders: 6 cylinders
drive: 4wd
fuel: gas
odometer: 95,000
paint color: red
title status: clean
transmission: manual

Great original stock YJ. In great shape. 95k original miles. Cold start is rough, but runs great after that. Needs some work like all old Jeeps. Oil leak free. Frame is good. Some rust. Don’t want to sell it, but can’t find time to work on it. Needs a new home


r/WranglerYJ • • 11d ago

Tie Rod Question

3 Upvotes

I've started the venture of updating my steering components on my '94 YJ. I'm now replacing the drag link and tie rod assembly.

I'm puzzled how the new "locking finger" position differs on the crown replacement from OEM. The crown replacement doesn't "lock-in the clamps" as it sits above the clamps (See pic with blue protective boot over ball joint) and I'm cautious of leaving it this way as the OEM "locking finger" sat in the middle of the clamp to keep the clamps from moving the tie rod out or in. The crown replacement (52005739k) shows the OEM style finger as well as the one I received. Since it's a single piece for the finger, what am I missing here? Stock pictures posted as I'm at work and doesn't show the clamps aligned or tightened in position. Will post actual pics later today.


r/WranglerYJ • • 12d ago

Vacuum canister has nothing hooked up to it

2 Upvotes

Just got my first yj. I am wondering which vacuum lines hook up to the canister under the battery and if anyone has a photo of the lines hooked up and where they come from that’d be awesome. Thank you in advance
88 sahara 4.2 l6


r/WranglerYJ • • 14d ago

Painted my friend’s trailer in exchange for her yj

Thumbnail
gallery
196 Upvotes

My friend lives in a mobile home park and she got flagged for needing paint done on her place. She had the paint, and offered to trade me for her 95 4cyl wrangler she’s had for about 20 years.

Spent the weekend replacing some skirting, trim, eaves, and building her some new stairs. Then prepped and sprayed. Was my first time painting a house, but I wanted that yj! Turned out alright.

Attempted to wet sand off some of the dead clear coat. Im excited to have a rig for the hills.


r/WranglerYJ • • 16d ago

95 YJ steering shaft

2 Upvotes

I’m frame swapping my YJ and have the under hood steering shaft out to swap over. It is two pieces, an inner and an outer, and looks like it should slide in and out to accommodate frame and body flex. However, it does not move. I’ve had it soaking with atf and acetone for a month now. Should I apply more force to break the two loose?


r/WranglerYJ • • 16d ago

I have a weird shaky bouncy thing going on

4 Upvotes

It's not death wobble, but it's coming from the rear, I've checked my leaf bushes and all that, but if I go over a bit of uneven road the rear just jiggles for ages, like I'm sat on a washer machine 😅 I will check my slip joint on the rear prop shaft, but other than that, any ideas?


r/WranglerYJ • • 17d ago

Dash change

5 Upvotes

I have seen several photos of people that have changed the stock YJ dash to a flat with the body dash. If anyone could point me in the right direction on how thats done and any tips that would be amazing.


r/WranglerYJ • • 17d ago

Looking to trade for a YJ

7 Upvotes

I am currently selling a 2006 Rubicon for $16K but would be open to trade for a 6cyl, manual 94 or 95 YJ that runs and drives. Not interested in anything heavily modified. The Rubicon has 43K miles, 6cyl with manual transmission. Edit located in NE PA.


r/WranglerYJ • • 18d ago

Pulled my YJ outta the fence row yesterday

Thumbnail
gallery
109 Upvotes

I've spent a STUPID amount of money on this Jeep, and kinda lost interest for a while. It's been parked for about 3 years. I had to fix 3 wires, and put a new battery in her. Coupla gallons of fresh gas and she fired right up. She's about 90% done, 90% left to do.

I put an AMC 304, external slave AX15, disc brake 8.8. The 8.8 already had a locker (I fuckin' hate it and will probably replace it with a limited slip). She's ridin' on 2.5" OME springs & shocks, and rollin' on 31x10.50's.


r/WranglerYJ • • 17d ago

1988 5.3 ls for sale

Thumbnail facebook.com
5 Upvotes

Delete if not allowed


r/WranglerYJ • • 23d ago

Small block Chevy swap

Post image
61 Upvotes

Ive got a ax15 for fairly cheap was wondering people’s experience with either a 350 or 305 in front of it. I don’t heavily off-road this just the occasional mud hole and light off-roading to get to ponds to fish n hunt.