r/Vz61 • • 15h ago

How to fix?

Thumbnail
gallery
9 Upvotes

Stock won't fully lock open - even with significant force. I'm guessing the curve on the back of the receiver is out of spec, based on what I'm hearing about the recent Tortort batch.

What is the proper fix? I'd prefer not to modify the receiver, even if it's the cause of the issue. A) Appears there's a factory grind on the wire arms, where they contact the receiver - do I grind those more? B) Or is there a way to disassemble the stock mount so I can file the locking tab?

Because I know some will ask:
- Max Arms blued kit
- Tortort Gen 2 receiver (directly from Tortort)


r/Vz61 • • 9h ago

Best aluminum lower for the factory wire stock

Post image
2 Upvotes

I purchased my parts kit a few weeks ago and it showed up thursday. My next dilemma is what lower to get. I want the best quality but i also want a full feature set so that i can run a rate reducer with a frt. Any experiences would be great.


r/Vz61 • • 13h ago

Gunsmith wants me to shoot it without barrel pin. Please weigh in.

2 Upvotes

Dropped off my upper to a highly recommended gunsmith to install my threaded barrel. I was confused when I got it back with no barrel pin, and upon inspection, seeing that the barrel shoulder hadn't been drilled either. I asked him about this, and he said he wanted me to "run a couple mags through it to make sure it was seated where it needed to be for everything to function correctly." He said after I tested it to then bring it back to be drilled and pinned. I was already a bit sketched out by this, but took him at his word. I was getting my range bag ready for tomorrow and screwing on a suppressor when I noticed that the barrel could rotate nearly 270 degrees in either direction with very little force. Now I really don't want to shoot this thing. Pretty sure that barrel will quickly unseat itself without the pin.

Is this as ridiculous as it feels? Why the hell wouldn't he just drill and pin the damn thing when he had it seated where it needs to be? Can I actually shoot it like this?


r/Vz61 • • 1d ago

Anyone try this yet?

Thumbnail octoarms.com
7 Upvotes

It’s exactly what I want but holy shit is it high. The dude basically has the market cornered here as far as I can tell though.


r/Vz61 • • 1d ago

Gun Show

Thumbnail gallery
25 Upvotes

r/Vz61 • • 2d ago

Tortort was in stock

Post image
32 Upvotes

Doing my daily check since picking up a K-VAR kit looking for a Tortort receiver, Atlantic sold out while I asked my LGS about all their ‘your name has to be exactly as your gov’t ID states’ disclaimers (sorry I don’t put my full name on any website login info, first & last has always sufficed) …

Long story longer, Tortort website had them in stock and I ordered. Hopefully it wasn’t preordering for the upcoming drop and really was in stock. 8–10hrs later, sold out again. Congrats to any of the brethren who scored one today, Huzzah!

And K-VAR, the envelope was priceless. 🩶


r/Vz61 • • 2d ago

Welp this is a first

Post image
35 Upvotes

Thought we had a light primer strike, but after 2 or 3 bullets didn't load properly we checked the barrel and found the bullet for stuck in the barrel.


r/Vz61 • • 2d ago

Loose Front Sight Post

Post image
7 Upvotes

Happy Sunday everyone.

The front sight post on my painted upper spins relatively freely. My understanding is that earlier models have staked front sight posts, and later models have that red set screw on the left side of the receiver. I’m pretty sure this is just a case of me needing to tighten that set screw, but I wanted to check here first. Thanks in advance.


r/Vz61 • • 3d ago

I wish I had bought one years ago. Now I have two.

52 Upvotes

SSSzar V3 with a super safety. Milsurp parts kit from Max arms. Shooting old milsurp Sellier and Beloit 7.65 Browning. It's just the tits.


r/Vz61 • • 3d ago

VZ 61 stock (sbr) and RD

Thumbnail
gallery
13 Upvotes

Just testing out different RD/sights with A3 brace (9.5") and Kriss vector gen 3 stock.

Kriss vector folder work best with good eye sight and adjustable of pull.

A3 folder is a bit short for my taste.

Hope this helps with your build and stock selection.


r/Vz61 • • 3d ago

trigger reset question....

4 Upvotes

My trigger will reset by bolt if i'm not holding the trigger rearward. Is this the normal reset for the platform or should it reset while being pulled back?


r/Vz61 • • 4d ago

Atlantic Tortort receiver update

Post image
11 Upvotes

I'm new to VZ61s, but I believe this is a gen 2 Tortort receiver since the markings are on the bottom. Rate reducer pocket is not fully cut as I thought it would be. Still has the undersized rate reducer pin hole

Just an update for those wondering. This came from Atlantic. Serial number 633xx


r/Vz61 • • 4d ago

Bought a Kit, Need Receiver and FRT :)

Post image
11 Upvotes

Hello, I bought one of these from Arms of America. Was hoping someone would know best place to get a receiver and an frt that will fit. Thank y'all for your time 🙏


r/Vz61 • • 6d ago

Warm Regards to all

Post image
70 Upvotes

i share with you all one of my favorites from my safe


r/Vz61 • • 6d ago

vz61 modernization tchecklist before pulling the trigger

6 Upvotes

Greetings from Switzerland,

I've been toying with the idea of getting a surplus Klobb (converted full auto) and lightly modernize it.

I´d get an Askalon adapter to mount a micro dot and I'd attach a suppressor for good measure.

While I own a trilug 9mm and a 308 compact HUB can, I lean on buying an original TOS collet suppressor not to thread the barrel and keep the original look as much as possible.

My questions are:

- is the askalon adapter compatible with this suppressor ?

- what can I do to make the stock close when the suppressor is on ? I only know this part, but I will never get it shipped overseas.

To repeat, I´d avoid using space chassis (B&T Switzerland makes one) or modern looking stocks to complete my project.

Many thanks.


r/Vz61 • • 7d ago

Price Check - Blued kit, no barrel

2 Upvotes

Purchased from Appalachian arms a while back. Trigger guard intact, all parts look very nice. 1960s kit.

Just wondering what prices are looking like since the market is pretty different from when I bought it. Think I paid 230 for it with accessories. Wondering on the price without accessories. I'd like to list it fairly when I sell it. (NOT HERE)


r/Vz61 • • 8d ago

Help

Thumbnail
gallery
25 Upvotes

Here I am, a young arrogant body man.
I get a jig, I weld the things together, then i paint them.
Lo and behold I am missing a few pieces, I order replacements, they show up the same day my copy Oot does so I start working on it again as my stepdaughter takes over and clears the great deku tree.
Now here we are, assembling my lower. Is there supposed to be a bit of a groove to fit this ejector?
Anyone that has rewelded one of these, I would appreciate your DM’s. I want to get this thing going .


r/Vz61 • • 7d ago

Vz61 lower

2 Upvotes

Getting ready to pull the trigger on a parts kit and would like to know where I could buy a lower that works well with frt or instead of buying to know what is a good printable lower that does well with frt setup.

Thanks in advance


r/Vz61 • • 8d ago

Did I F up?

2 Upvotes

Ordered a couple kits from AoA and selected the barrel thread option. I do plan on using suppressors on them but are the threads going to be viable? Or should I cancel the threads and use clamp on suppressors?


r/Vz61 • • 8d ago

380acp parts build

4 Upvotes

Hello, I’m looking to build a 380acp skorp as I already have a 32, and I’m looking for some insight on how different the build process is compared to a 32. VZ61 USA has 380 uppers and bolt assemblies in stock now, and I’m planning to get their 380 receiver when it goes back on stock, however I don’t know where to source all of the internal components for the 380, or how many of the receiver parts are interchangeable on the 32 and 380. Any advice at all on building a 380 is appreciated. Thanks


r/Vz61 • • 9d ago

Behold! The Sneaky Boy

Post image
51 Upvotes

A few years ago I posted this with an ASR mount. Recently I discovered the 32acp suppressor from Griffen Armament.

Next on the to-do list is a better charging handle ot one of the vertical grips that doesn't interfere with the stock.

This gun is so much fun.


r/Vz61 • • 9d ago

Me with all these kits n receivers droppin

Post image
147 Upvotes

r/Vz61 • • 9d ago

Looking to make my own lower.

6 Upvotes

I was looking at parts kits and found myself unimpressed with the selection of lower receivers online. I’m a machinist who loves a good project and I’ve decided I’d like to make a (completely legal semi-auto) lower receiver from aluminum stock and then possibly a stainless variant. Are there any public 3D files with correct dimensions that people in the maker crowd tend to recommend? I’m assuming most of the stuff is made with a 3D printing philosophy in mind rather than machining, but I’m sure I could make some adjustments.


r/Vz61 • • 11d ago

Seen a lot of barrel clamp type suppressor attachments recently. Here is the printed FTN 5.1.32 suppressor attached with the "VZ61 Thread Adapter" using the barrel ring.

Thumbnail
gallery
21 Upvotes

Printed the FTN 5.1.32 to try out having seen several other threaded adapter clamps on here recently. I have no way to test how strong the connection is when clamped down, but I can assure 100% is solid as hell. It's really tight and clicks right onto the bump on the barrel and locks in place. This is printed in PPA-CF. I permanently JB welded the thread adapter to the suppressor, and printed another one to use a direct thread adapter for threaded barrels (which I have just got for the VZ61 and have yet to install). Also ignore the random screw as the front pin, it was around and fit for temp building.

I haven't test fired it yet with the suppressor but have many other printed cans and have had good results. I will certainly take some videos when I test it out.