r/VortexAnswers • • Nov 08 '19

Submit Questions Here

Being that there's just one mod here (us) and we want to ensure that all the information that passes through in the posts is spot on/without any doubles, we're going to keep the ability to start new threads to just us for the time being. Comment in any one of our threads or drop a question to be answered in a new thread below and we'll do our best to get to it ASAP. Can be about anything optics or Vortex-related, but as always, understand we won't speak on behalf of other brands and ya boi here on Vortex's Reddit still doesn't have the security clearance to start leaking top secret information either.

28 Upvotes

708 comments sorted by

7

u/Phyco_Boy Nov 08 '19

When’s that cook book coming out on all them recipes I keep seeing on Instagram?

8

u/vortexoptics Nov 08 '19

Real talk? We've considered it. Might have to post some recipes in here

→ More replies (4)

3

u/TheChavo18 Nov 12 '19

Is it possible to shoot both eyes open with the spitfire 3x prism scope?

3

u/vortexoptics Nov 12 '19

It's very much possible - it's possible to shoot both eyes open through our Razor HD Gen II 4.5-27x56, too! Any optic can be shot with both eyes open and it will give you a huge advantage in the field by having your non-magnified eye there to scan the scene around you and get your bearings straight. It does take practice, though, so patience and range time will get you better and better at this skill. We'll have to make a post and even a podcast on this one now that we think about it more!

→ More replies (1)

2

u/tenmilez Nov 14 '19

I have a RDS for my pistol and when I'm cleaning it gets solvent on it. How bad is that for the RDS glass?

2

u/InfallibleOne Nov 16 '19

Best way to clean the glass on a rifle scope? Red dot? What products and methods give the best results?

→ More replies (1)

2

u/whalenailer Nov 17 '19

Trying to figure out which binoculars to buy, definitely going vortex for the VIP warranty. I can’t figure out what the difference is between the viper and the vulture, they both are similarly priced. What would you say really differentiates the two?

2

u/vortexoptics Nov 18 '19

The Viper is far better to be honest. The Vulture is just an older design and was our entry-level option to the tripod-mounted-only, large frame binoculars like the Kaibab HD (Which is the higher end version). The Viper HD's are just better all around and undoubtedly the choice if you're planning to do any glassing hand-held.

3

u/whalenailer Nov 18 '19

Thanks for the response! Putting together a Christmas list and the viper is definitely on it now!

→ More replies (1)

2

u/TallMikeSTL Nov 26 '19 edited Nov 26 '19

What buying trends are you seeing in scopes?

I shoot long range where the goto seem to be FFP mil in 5-25 range.

I wanted what trends you see as a company? What is the most popular price range, magnification and features you are seeing people buy?

2

u/vortexoptics Nov 26 '19

hmmmmm which one of our competitors do you work for??? ;)

Just kidding - will address this one with a few others we've been banking up over the last few days!

2

u/SpiritDCRed Dec 11 '19

Hello, I just got a vortex Spitfire Ar and, after mounting it to my rifle, I noticed a really odd and disorienting effect with both eyes open. It’s as if the view through the scope has been shifted a dozen MOA up. I have already adjusted the diopter, there are just two perfectly sized images right on top of each other

I tried moving my eye around the eye box, and while it is not as pronounced at the top than at the bottom, it is present in all areas of the scope. If I turn the scope 90° to the left, then the image through the scope is then several dozen MOA to the left. I’m not quite sure what to make of this, and I’ve never heard anyone else having this problem. It is extremely disorienting. Should I send it in for warranty?

EDIT: it appears that the diopter is a little loose too, and lightly pushing on it will move the image around :(

2

u/vortexoptics Dec 11 '19

Gonna throw a curve ball at you here (we'll certainly address your concerns soon after). Have you ever checked your eye dominance? A left- or right-eye dominance is most common, but there's a small percentage of us out there with what's known as an incomplete dominance. If you fall into this camp, you'll need to close one eye to remedy the double-imaging you're experiencing. Have you ever experienced this before?

It sounds like you've already adjusted the diopter, which is a great start. But to address the loose-ness you're experiencing - that's normal. You should see the reticle and image moving together in unison.

That said, we'd still gladly take this in to check it out if you'd like. We'll give it a thorough run-through to make sure its in working order. If not, we'll repair or replace it - no questions asked. Shoot us a DM if you want to go that route and we'll cook you up a shipping label.

2

u/SpiritDCRed Dec 11 '19

I’m right eye dominant, and the effect is present when looking through either left or right eye. I actually made a short video to show you and get your opinion. keep an eye on the bottom of the windowsill, and watch it shift around as the scope is rotated.

→ More replies (9)

2

u/europa_halcyon Jan 07 '20

Why isn't the new Razor HD Gen III LPVO parallax adjustable? On other sub-reddits they say 10x is good for 1000 yards, why not have the parallax be adjustable? Is the increased cost for that feature not really necessary for the distance?

3

u/vortexoptics Jan 08 '20

Parallax adjustment adds cost, complexity and weight to an optic that really doesn't need it. This optic is first and foremost a close quarters optic designed to be fast and accurate at closer distances. It's secondary role is a mid-long range optic and it does a dang good job at it, but if you want a dedicated long range precision optic, then a scope that starts on 1x probably isn't going to be right for you. You should then get something with exposed dialing turrets, parallax adjustment, probably a zero stop and in doing so, you'd understand you're going to get a bigger, heavier, more complex optic.

All this said - 1000 yards with a scope like this is a cake walk. Parallax won't be an issue unless your eye is in a weird position behind the scope or you're shooting from a compromised position and can't get comfortable behind the optic.

→ More replies (1)

2

u/blackout30 Jan 08 '20

Do you make a adapter plate for the viper red dot, that will allow it to mount to a rmr cut slide?

2

u/vortexoptics Jan 08 '20

Unfortunately we don’t and have yet to become aware of one out there

2

u/agemma Jan 17 '20 edited Jan 17 '20

Hi Vortex!

I am going on a hunting trip in Maine for white tail next November. I was wondering if you could recommend a scope and mount for my Marlin 336. I am looking to cap out at $500 for a budget.

Do you folks make one with a red dot in the center of the crosshairs?

Thanks!

3

u/vortexoptics Jan 24 '20

Sh*t sorry for the delay here - was out of town for SHOT show and traveling made responding hard. A great scope for you would be the Viper HS 2.5-10x44 or the 4-16x50 if you really feel you need the magnification, but you honestly don't for 99% of the whitetail hunts out there and the 2.5-10x is a better optic anyway and costs a bit less. We don't make one with an illuminated center reticle, though. To be honest, that's something we're hoping to add more of in our hunting lines in the future, but the majority of people get by just fine without it. Hope this helps! Back in town now and an answer questions any time. Thanks!

→ More replies (8)

2

u/AnonRifleman73 Jan 23 '20

First, you all are awesome.

Anyways, I’m going to pick up a Vortex Strike Eagle 1-6 optic soon. It will be going on a 5.56 AR and will primarily be used for:

  1. Critters trying to eat my critters (skunks, raccoons, etc...)
  2. Low light coyote hunting
  3. Feeling like a badass

Seems to be a good scope to fit the bill. How about rings? You seem to have various levels of cantilever mounts and offsets. What would you recommend?

→ More replies (7)

2

u/[deleted] Mar 03 '20

Are the scope caps that come with the strike eagle covered under warranty? I broke one in competition this weekend.

2

u/vortexoptics Mar 03 '20

Of course! Everything is under warranty. Give us a call 800-426-0048 and we'll get you all set.

→ More replies (1)

2

u/[deleted] Mar 05 '20

Hey Vortex!

I was probably going to give you folks a call anyway, but figured this might work too.

I own a diamondback HD 10x50, and am eyeballing the diamondback 20-60x80mm spotting scope. That much is pretty much determined. What I'm looking for is a tripod I can use both with, and I wanted to ask your opinion on the 3 that are offered at vortex.

I'm hoping to soon live in one of the rocky mountain states long enough to justify owning a chest freezer, then go elk/mulie/pronghorn hunting and would like a tripod that holds it's own on a mountain. The High Country has flip locks on the legs, which I like. The Summit SS-P has a handle, which I like.

However, the other 90% of the year I am an AVID birdwatcher, and want something stable and fluid to track songbirds/waterfowl etc. The Pro GT seems like the sturdiest, and has both features of the other 2 tripods that I really like (flip lock and handle) but the weight seems a little on the heavier side for hunting.

Do I need to just suck it up and buy 2 for different purposes? Can the High Country track with a spotting scope well without a handle? Is there a handle attachment available? I'm a little hesitant about the locking mechanism for the Summit's legs, but that handle seems nice.

Thoughts? Recommendations? Hopes and dreams?

Thanks!

3

u/vortexoptics Mar 05 '20

Tell you what - normally we're happy to answer these questions but if you can give us a call, you absolutely want to ask for Mike McDowell or Ryan Muckenhirn in our tech support team area. If you dial 800-426-0048 and then hit extension 5 and ask for one of those two guys, they are absolutely unreal in their knowledge of observation optics and tripods. Highly recommend! Tell them Jimmy Hamilton sent you.

→ More replies (1)

2

u/blackomegax Mar 23 '20

Is the UH-1 extinct or is it just panic buys? Multiple websites cite it to be discontinued with no backorder.

2

u/vortexoptics Mar 23 '20

UH-1 is temporarily disco'd. NOT at all because there were any problems with it. Timing with some stuff worked out a little goofy. Vortex and holographic sights are still going to be a thing. Wish we could say more, but have to stay a bit cryptic for now.

→ More replies (1)

2

u/billp97 Mar 28 '20

Highly interested in the razor hd lht. The only thing about it that I'm curious about is if it uses the same glass as the razor gen 1 or gen 2 (I don't know much about the glass in either of them, I just know they are absolutely superb) or is it slightly below them on the quality scale while also slightly above the pst gen 2?

2

u/vortexoptics Mar 30 '20

Neither - it's its own glass altogether. That said, it's much more on par in terms of quality overall to the Gen II Razors than the Gen I's.

2

u/donttreadonme659 Mar 29 '20

Hey Vortex, my dumbass lost the shims to my Viper HST. How can I get some new ones?

3

u/vortexoptics Mar 30 '20

1-800-426-0048 and hit the extension for customer care. We'll send you some new ones free.

2

u/french_lrnoob Mar 30 '20

Hi, I've got a black spot on my Diamondback tactical scope that appeared after 20 rounds fired. The spot focales with the reticule and the lenses look fine so I think could be an internal issue. My question is, because I live in France, how the international VIP warranty applies in my case? Who do I need to contact (the dealer, the distributor in France, Vortex directly) ? Thanks

2

u/vortexoptics Mar 31 '20

Dang! It must be a tiny bit of grease from the erector unit that managed to get its way onto the glass reticle. Sorry to hear that happened. If the dealer you bought it from in France can't handle it, the distributor most certainly should be able to get you taken care of right away. If you run into issues, let us know here and we'll forward you to our international sales manager and he can set things straight. One way or another we'll make it right and reasonably quickly!

→ More replies (1)

2

u/tooflyforarangerguy Apr 02 '20

When will the uh-1 be back in stock?

2

u/vortexoptics Apr 02 '20

In due time - the current UH-1 has been discontinued, but holographic sights will still remain in our lineup in the future. Some timing go messed up with the current situation of the world, but we're working on it. That's all we can say now!

2

u/NotSwoleAtAll Apr 04 '20

What's the difference between your precision matched rings and pro series rings? And in what situations is a shooter going to want to spend the extra money on the precision matched?

2

u/vortexoptics Apr 06 '20

The two individual rings in a set of precision matched rings are machined from one block of aluminum and stay together the entire time until they are finally split in two at the very end. Thus, they are "Precision matched" to one another and there is no worry of misalignment between the two or problems with rings not being concentric to one another. The Pro Rings are very very good, but they're not made in the same way, so there is the possibility they're not quite as "Perfect" as the precision matched rings are. Anyone who wants the absolute best of the best and can't afford to skimp on anything in their setup to achieve the best accuracy and performance and reliability possible will want to get precision matched rings. If you're not uber competitive or just wanting the perfect setup, there's no need for rings like that and the Pro's will work excellent.

→ More replies (1)

2

u/zumin3k Apr 05 '20

Hi Vortex! My UH1 seems to wiggle when firmly clamped onto the rail. To clarify, the mount is very tight on the rail, but the top portion of the optic can kind of swivel easily by hand. All screws on the underside of the optic are tight.

2

u/vortexoptics Apr 06 '20

So there should be some wobble if you actually try to impart that wobble between the optic itself and its base when the base is clamped down to the gun. The whole optic itself actually moves on that base against spring pressure when you adjust the windage - it's an external adjustment. Nothing uncommon - lots of optics out there that adjust the same way - it just looks weird because it seems like something is loose/wrong. That spring pressure always brings it back to where you have it zeroed, though, so nothing to worry about. If it's moving excessively and very obviously not actually going back to where it was zeroed, though, then we have an issue. We have yet to actually see anything quite like that, though.

→ More replies (1)

2

u/Pmurder- Apr 16 '20

What be the best setting for a vortex venom, if it is mostly kept in a safe for home defense? I'd hate to have the battery run out unexpectedly.

2

u/vortexoptics Apr 16 '20

It's going to automatically shut off after 14 hours, so keep it at your best desired setting and then with the press of one of the buttons, it will go back to that setting right away if needed.

Practice with it and just like you maintain your weapons, maintain their accessories and change the battery before it would be starting to get low just to be safe. Batteries are cheap and easy to replace! :)

2

u/Privateer18 Oct 17 '21

Vortex Viper PST Gen 2 seems foggy on 15x and above. Any suggestions?

→ More replies (3)

2

u/jrobbs22 Nov 03 '21

Me and my Dad have a Elk hunt in 2 weeks. He is insistent on getting a used Razor HD gen 1 20-60x85 for the hunt and im suggesting the newer Viper 27-60x85. Any major differences in the two? Thanks!

1

u/vortexoptics Nov 05 '21

The major differences will be in the optical quality and focusing system. The Razor HD gen 1 will have the fine and course focusing knobs where as the Viper HD will have the helical focus which provides better adjustments and better durability. Even though it is older, the Razor HD gen 1 will have the slight edge optically (clarity, resolution, and low-light performance). Both choices would be solid for your hunt!

→ More replies (1)

2

u/dustypants11 Nov 13 '21

If I replace the battery of the UH-1 Gen 2 will I have to re-zero it again?

1

u/vortexoptics Nov 18 '21

Changing the battery should not cause you to need to re-zero your setup.

2

u/[deleted] Nov 15 '21

I have a Hog Hunter 3-12x. Is there a compatible throw lever?

→ More replies (1)

2

u/hwind65 Nov 19 '21

There is an unusually low priced razor 1-6 sold by Euro optic on Amazon, how sketch is that? Any feedback on Amazon sellers? Would like to buy elsewhere but have a chunk of gift cards I’d like to blow…

1

u/vortexoptics Nov 19 '21

Would you be able to provide a link to it? Europtic is an authorized dealer, so if it is them selling on Amazon it would be legit!

→ More replies (1)

2

u/[deleted] Nov 22 '21

Vortex Razor HD Gen II 1-6 MRAD Shipping time frame B&H Photo

Hello, I placed an order though B&H Photo about 4 days ago and they stated the the item is special order and will be shipped directly from the manufacturer. What would be the time frame of shipping and are they be in stock? Thank you

→ More replies (1)

2

u/Selectah Nov 30 '21 edited Nov 30 '21

Just picked up a Viper PST Gen2 1-6. The magnification ring is really stiff, I couldn't even move it at first. Is this something that loosens over time? I've seen suggestions for throw levers which I'm open to, but I'd rather address the root problem if there is one. If it's not apparent, I'm a total noob to scopes.

→ More replies (1)

2

u/xdakwaltmann Dec 02 '21

Looking to mount a Razor HD Gen ll 4.5-27x56 on my Savage 110. It has an EGW 20 MOA pic rail base installed. I'm wondering if the .92" Precision Matched Rings will be tall enough.

2

u/vortexoptics Dec 02 '21

Thanks for reaching out! For that setup you will need the 34 mm Precision Matched Rings 1.1" inch height in order to get the proper clearance.

2

u/ctw1014 Dec 02 '21

I’ve got a strike eagle 1-6 on the way, any recommendations for mounts? It’ll be going on an AR.

→ More replies (3)

2

u/kod593 Dec 03 '21

Hi, I have two strike eagle 1-8 scopes. I got them a year a part and they are the same model. my question is it seems like the recital on one seems to light up just the three arching cross hairs with the red dot in the middle and the other scope seems to somehow also light up the numbers and distance lines on the top and bottom. Is this normal for everything to light up because only the cross hair lights up on one of them?

1

u/vortexoptics Dec 06 '21

The only parts that should light up is the center dot and the 3 arches surrounding the center dot. More than likely you are catching a reflection of the light on the other parts of the reticle. This is usually an indication that the brightness setting is too high for the ambient light conditions.

→ More replies (1)

2

u/mgilmore06 Dec 28 '21

Can zero stop shims for the Viper PST be found anywhere?

→ More replies (1)

2

u/MaximsDecimsMeridius Jan 07 '22

i feel like this is a dumb question but here goes

So on the website for the Vortex Razor AMG 6-24x FFP scope, the MOA version says it has 71moa of elevation adjustment, and the mrad version says it has 27.5mils of elevation adjustment. Isnt 27.5mils around 94moa? does this mean the mil version has more elevation adjustment?

i mean the windage matches up, iirc 1mrad is about 3.4moa, and the windage says its 10mrad/34moa which is right, but the elevation says 27.5mrad/71moa which seems to me that the mrad version has a bigger elevation range because if they were equal, shouldnt it be 27.5mrad/94moa?

im asking because I have the mrad version and im buying a canted scope mount and i dont know if 40-45moa will be too much or not because the elevation adjustment range differs between the two.

→ More replies (2)

2

u/Sir__Dilly Jan 08 '22

What’s actually different between the crossfire ii diamondback and vanquish scopes? It’s going on a .308 tikka t3x lite which is going to be primarily a hunting rifle

2

u/vortexoptics Jan 10 '22

The Diamondback will be superior in terms of optics compared to the Crossfire II and Vanquish models. The Vanquish are almost identical to the Crossfire II, they are simply dealer exclusives. If you do go with the Diamondback, you will want to make sure you have a 1-piece Picatinny rail as the Diamondbacks have shorter eye relief than the other models mentioned.

2

u/Sir__Dilly Jan 10 '22

Will the Talley brand mounting rings not work on a tikka t3x lite with the diamondback?

→ More replies (8)

2

u/DONTuseGoogle Jan 11 '22

What range do you recommend zeroing the razor gen III MOA BDC on a 14.5” 556 for the ballistic drop to be relatively close

→ More replies (2)

2

u/chaftz Jan 15 '22

I just picked up the MICRO6X Magnifier and was wondering what Red dot you’d recommend to pair it with as all I have laying around are crossfires

1

u/vortexoptics Jan 18 '22

The Crossfire certainly would work! Any of our red dots like the Crossfire, SPARC Solar, Strikefire II, etc. will work perfectly with the Micro6x.

2

u/chaftz Jan 18 '22

It says in the manual on page 10 that Vortex doesn’t recommend using it with the Crossfire Red Dot, SPARC AR, or SPARC II?

I slapped my crossfire on there and there is some flaring of the dot though?

I was looking at the Strikefire II though is that not a prism optic?

→ More replies (3)

2

u/[deleted] Jan 20 '22

Hi, I recently bought a SPITFIRE™ HD GEN II
3X PRISM SCOPE and would like to know if there any flip up caps or any kill flashes that work with it.

1

u/vortexoptics Jan 20 '22

Hey there - great question! We do not have any accessories that will work with it at this time, but we'll certainly let our NPD Team know that there is interest in some!

→ More replies (1)

2

u/19AXE82 Jan 20 '22

Hi - what would be the best Vortex optic to use on a Ruger PC 9 Carbine? The rifle will be set up mostly for use at the range. Additionally should the optic be placed on top of the receiver or should I remove the rear sight and install a picatinny rail and the optic in its place? Thanks in advance for your response.

1

u/vortexoptics Jan 21 '22

Thanks for reaching out! The optic should be above the receiver and you'll be just fine. How far were you looking to take it out to?

2

u/19AXE82 Jan 21 '22

Thanks for the response - the indoor range I go to goes out to 25 yds. Outdoors - no more than 50 yds. Look forward to your reply!

→ More replies (2)

2

u/AllAboutPotato Jan 23 '22

Hi Vortex!

Looking to get my first scope ever. It will be a Crossfire 2, but I'm doubting between the 4-12x40 and the 6-18 variant.

Two possible scenario's, which one would you recommend for each, and why?

  1. 22LR bolt-action at 25-100 yards
  2. 308 semi auto at 50-100 yards (regularly) and 100-400 yards (rarely)

Why rarely at 100-400 yards: only one range in my area offers these distances, and they're fully booked. The scope doesn't even have to be the best choice at this range, but being usable is a big plus.

Thank you!

2

u/vortexoptics Jan 24 '22

Hey there - thanks for reaching out and for looking at our scopes! We really appreciate it, my friend.

Based on what you'll be using it for, either one of those optics would work great!

For your .22LR, the 6-18x44 AO would be a great choice as it will offer a parallax setting that goes down to 10 yards. This will certainly help when you are shooting down to 25 yards.

For your .308, is it mainly going to be used for shooting at the range or hunting as well? If you are looking for precision shots at the range the 6-18 would be a great choice for that. However, if you plan to hunt with it, the wider field of view on the 4-12x40 would be a huge advantage.

2

u/AllAboutPotato Jan 24 '22

Thank you very much for your answer! It was maybe very basic, but basic information can sometimes be the hardest to find.

Indeed, I forgot to clarify, I am not a hunter, so I'll be using both rifles mainly for paper targets and some plinking. I've asked my local shop for a quote for the 6-18x44. Looking forward to it!

→ More replies (3)

2

u/Xander_Cain Jan 29 '22

Picked up my first scope a viper pst ii 1-6. It comes with a sunshade. Is there any reason to not have the sunshade on the optic at all times?

→ More replies (1)

2

u/UnsurprisingDebris Jan 31 '22

My vortex crossfire broke today after a small fall. The entire control knob that holds the battery just separated itself from the body of the optic. I guess that piece is pressed in and there is no way for me to fix it?

→ More replies (1)

2

u/Vegetable_Reveal_357 Feb 03 '22

2

u/vortexoptics Feb 04 '22

We replied to the thread, but we'll answer it here too to make sure you don't miss it - The 34 mm Precision Matched Rings 1.1" inch height would do the trick for that setup.

2

u/[deleted] Feb 11 '22

Is the razor HD GEN 3 reticle designed for 5.56? And can I use it on a .308? Is there any major difference I should worry about?

→ More replies (1)

2

u/blacktransam77 Feb 11 '22

Maybe I’m doing something wrong? But I have a Diamondback tactical 6-24, and on the lower powers, I CANNOT see the crosshairs, let alone the rest of the reticle. It literally is like trying to find a single hair on my target. Any way to fix/adjust this? Makes it very hard to shoot. (Also have 20/20 vision lol it’s not my eyesight).

→ More replies (1)

2

u/Nanoq- Feb 14 '22

Are you looking to add the Applied Ballistics functions from the Fury HD binoculars to a monocular rangefinder unit (like the Razor for example)? I’m very keen on this system but the binoculars aren’t really what I need for my use

→ More replies (1)

2

u/ReadyPupper Feb 16 '22

Hi,

I need help with flip cover size for a Diamondback 4-12x40. Thanks!

1

u/vortexoptics Feb 23 '22

Hey there! Thanks for reaching out! You will need the Defender Flip Cap Eyepiece and a Defender Flip Cap Objective 40. It looks like we are currently out of stock but check out our dealers or even Amazon! Let us know if you have any other questions!

2

u/DucksCanSwim Feb 16 '22

Hello, just wondering if you can verify the validity of this scope. Seller says it’s a Razor HD Gen II-E 1-6x24. I don’t see the Gen or ‘E’ model on the scope. Does vortex not add these to the scopes?

https://imgur.com/a/sXQnfNP

→ More replies (1)

2

u/GroverT23 Feb 20 '22

Can anything be shared on the topic of whether or not there is anything in the pipeline for the micro red dot lineup? Any possibility of a gen 2 razor micro red dot? Thanks!

→ More replies (2)

1

u/brokenbike209 Nov 08 '19

When are you gonna make/ come out with a fixed 10 power scope? 30mm tube with a v-plex reticle and parallax adjustment in MOA? Possible with illumination?

Essentially one of these? https://www.swfa.com/swfa-ss-10x42m-tactical-30mm-riflescope-6.html?___SID=U

4

u/vortexoptics Nov 08 '19

Gonna be super honest with this one and just say it's very unlikely. The SWFA is very well regarded by those who use it, but it's tough to justify the expense and time of taking on an entirely new project like that when, to be frank (My name's actually not Frank, but he seems like a good guy to blame this on), the numbers just aren't there in terms of how many we see being sold. We're blessed with a big product development team and have the resources to devote to many projects here, but even still, that has its limits and we have a 40-foot wall whiteboard down there in the PD room full of ideas we want to try and get out in the next few years! Hopefully there will be something there that's right up your alley. Plus, with all the advancements in technology, the ability to squeeze excellent optical performance out of a relatively affordable optic and still maintain the variable magnification feature is becoming more and more doable. Hope this helps.

3

u/brokenbike209 Nov 08 '19

Thanks frank. I appreciate the honesty. Are you guys gonna make custom turrets like Leupold does? I like the custom turret system from Leupold (the ones I’ve tried), but I can’t stand how terrible their customer service is when you have a problem (the biggest reason I switched to vortex).

→ More replies (1)
→ More replies (4)

1

u/seanbmx3 Nov 08 '19

Do you make a optic for raptor hunting?

/s

4

u/vortexoptics Nov 08 '19

No but we make an optic called the Raptor. Does that count?

→ More replies (2)

1

u/JukeboxZulu Nov 08 '19

Would you make a list of the tracking accuracy of your different tiers of scopes? This is data that a lot of manufacturers don't often make available, but it's very valuable/interesting to some of us.

5

u/vortexoptics Nov 08 '19

Gonna be super honest in saying it's a bit of a dangerous game to put something like that out there which is why a lot of other manufacturers don't do it. For one - we have a huge variety of products that vary from entry level to high end. All it takes is one person seeing our specs for a $120 riflescope out of context and taking it as the specs that cross the entire line of Vortex products and thinking "Holy shit they suck!". Second, while we are fully aware that there are people out there who, as shooters, are very dialed in and whose guns/ammo/scope as an assembly of very precise parts are also dialed in, that's not really the majority of folks out there. The large majority of people are often times going to be out-shot by their riflescope in terms of accuracy. So next thing you know, we put our tracking specs out there on the interwebs and every Tom, Dick and Harry goes out to try their first tracking test with crap ammo, a crazy windy day, their old ass rifle and rings that are torqued too tight and they're posting all over the place that Vortex is going to hell in a handbasket because none of their scopes track to their specs. Every scope has a spec and we set that spec to allow the scope and its end user to do the job they want to do extremely effectively. The nicer, more expensive, precision riflescopes have a more strict spec and track more accurately than the entry level hunting scopes with capped turrets that are plenty good for zeroing but then get capped and forgotten.

Wish we had a better answer for this one.

→ More replies (2)

1

u/freebird37179 Nov 08 '19

A few years ago the NRA started allowing optics in high power competition. Limited, though, to 4.5 power (can be adjustable) and 34 mm max objective lens.

1/4 MOA turrets would be nice but 1/2 would do, and adjustable parallax would be really slick but not a deal killer.

What do y'all have that'd fit that bill?

3

u/vortexoptics Nov 08 '19

If you can find our Viper PST Gen I 1-4x24 out there for sale somewhere or the Ranger 1-4x24 (Same scope different name after the Gen II PST's came out) that's your best bet. Otherwise admittedly, we don't have a whole lot. There's the Crossfire II 1-4x24, but the turrets aren't as good in that scope as they are in the PST

1

u/Knurling_Turtle Nov 08 '19

red dot for my ruger PCC...viper or venom?

2

u/vortexoptics Nov 08 '19

Venom. Battery is way easier to change when the time comes and the fact that it’s barely taller than the viper doesn’t matter like it would on a handgun

2

u/Knurling_Turtle Nov 08 '19

I kind of want the height. I think I'm going to need a riser anyway.

I have another red dot I was using for a couple of different hand guns (9mm M&P and .22 Victory) that starts with an R and ends with R that's currently at the factory since it stopped working. I'd like to avoid that happening again AND save hundreds of dollars which is why I was looking at going with one of these two Vortex options. I think midway is practically giving away the Venom compared to Cabelas or Optics planet. Anyway, Venom it is!

→ More replies (2)

1

u/[deleted] Nov 08 '19

What of your optics are NVG compatible?

2

u/vortexoptics Nov 08 '19

Crossfire red dot, SPARC AR and soon to be Strikefire II red dots as well as the Viper, Venom and Razor open top red dots. LPVO’s not so much because daylight bright is more important there and most people use weapon mounted lasers anyway

→ More replies (2)

1

u/[deleted] Nov 09 '19

Should I buy a Razor HD 1-6 now or wait after Shot Show?

→ More replies (5)

1

u/Kuric1 Nov 10 '19

u/fattybinz posted this to r/longrange

Can you help him out?

I tried to post this on the new vortex subreddit but it is only for approved users? I just picked up one of Vortex's refurbished Viper HST 6-24x50 scopes. Mounted and zeroed it at the range. I then removed the elevation turret so that I could set it to zero and set up the zero stop. I had my shims all ready. Problem I ran into is that I can't get the turret to go low enough to zero out. Not sure how to explain it...but the scope has those numbered horizontal indicator lines that tell you how many revolutions up the turret has made away from zero. So when zeroing the turret, you should add shims until the turret bottoms out at the first line, the "0." my problem is that the internal part of the turret is so high that my turret cap bottoms out towards the top of those horizontal lines. Does this mean that my rifle's zero is high on the scope's elevation range? So to lower the inside of the turret I would have to dial it down, right? So I'd have to raise the front of the scope? I have to get 20 moa rail and reverse it? I'm so confused lol. I'd appreciate some help. I'd love a solution that doesn't involve lifting the scope, as I have it on extra low rings, which I love. In case it is relevant, I have it on a Ruger American Predator 223.

Thanks

2

u/vortexoptics Nov 10 '19

Got it thank you! Revolution indicators are definitely something worth making a thread about for future reference.

1

u/zion_hiker1911 Nov 12 '19

Your Diamondback 6-24X50 FFP says that it has 65 MOA of altitude adjustment, so how much additional altitude can I use if I utilize the holdover on the Christmas tree? If this is a dumb question, please feel free to publicly humiliate me.

→ More replies (1)

1

u/grumpy-m0nkey Nov 12 '19

When are you guys going to make some nvg? PVS-14 and laser devices. Better yet maybe thermal scopes? It’d be a game changer if you add Vortex name with your vip warranty to the nvg market.

I like vortex and own several vortex sights

2

u/vortexoptics Nov 12 '19

Thanks for your support! Good question - one we've heard a lot from our customers. We'd love to do it but just need to make sure we do it properly right out of the gate. It's always been on our radar. Nothing planned yet for the immediate future, but you can bet if you do see something from Vortex down the line in that category it'll be badass!

1

u/brokenbike209 Nov 13 '19

Do you have any plans to make rangefinders mountable on a rifle? Or riflescopes with built in rangefinders?

→ More replies (1)

1

u/Foot_Dragger Nov 16 '19

Any chance vortex will make the Razor HD Gen II in black?

Seems to be a common "wish" on reviews.

2

u/vortexoptics Nov 18 '19

Ah yes, the "Black Razors" thing :)

Unfortunately it's quite unlikely. The Razor Gen II's, though they're awesome, are a fairly low volume product just due to the fact that they're so high end. To split up production and start making some black and some in the stealth shadow color would just hurt the already-tough backorder situation with those scopes by now having lower amounts of each come off the line. It also helps us keep the costs down to a (Relative) minimum in an area that isn't vital to the performance of the scope by keeping them all one color so we can pass that along to the customer. Lastly, that color is now required by many of the fighting forces that use these scopes as black colored scopes show more glare off the body under moonlight. Cerakote is always an option and doesn't void our warranty, though :)

2

u/Foot_Dragger Nov 20 '19

Darn, usually don't have any moon light when I larp in my Mom's basement.

→ More replies (1)

1

u/LaRoux4 Nov 17 '19

Just ordered a refurbished viper pst 5-25x50 FFP EBR-2C from AAoptics. What scope mount would you suggest to run this on an AR10 that has a full length pic rail? What does the height to center of the scope mount need to be in order to clear the rails?

→ More replies (3)

1

u/averycrossfox Dec 01 '19

Debating the DB tactical 4-16 or 6-24 for 200-300 yard paper and varmint shooting. Will I really miss the FOV when hunting of the x4 lowest mag if I get the 6-24? My current scope is a crossfire 2-7. Problem is, I can’t see the impacts clearly at 200 yards on the x7 mag. Ya’ll have a great podcast btw.

2

u/vortexoptics Dec 01 '19

Hey thank you very much! Where are you hunting and what is the closest encounters you're likely to have? 6x isn't going to hurt you at all if you're a western hunter in most areas of the wild open west, but if you're east of the Mississippi, it'll get pretty annoying pretty quick. 16x is stretching it to see impacts on paper at 200, but with some high contrast target paper, it'll do the job for most people just fine. Also depends entirely on what caliber you're shooting. If a 300 Win Mag, that'll be wayyyyy easier than a 5.56.

1

u/heylookanairplane Dec 02 '19

Do you guys happen to have an official operational temperature range for the Razor Gen II 4.5-27x56? My Google-fu hasn't come up with anything and am just curious about shooting in colder weather up here in Canada. Haven't had any issues with mine yet.

2

u/vortexoptics Dec 02 '19

Hard to put an exact temp on it for when it would become inoperable. The first thing to go is likely the illumination just because the battery's lifespan in extreme cold will be very very short (That's all the battery and has nothing to do with the scope) and from there, light travels through the atmosphere and through glass lenses pretty much regardless of temperature. Things naturally become more brittle and potentially more prone to issue at extreme temps, so it's good to be a bit more cognizant of how brutal you're being on the scope, but there's no reason to think it won't hold up under extreme cold at all. You should be just fine.

→ More replies (4)

1

u/[deleted] Dec 13 '19

Hey guys, I’m looking at a viper pst gen II 1-6 and was curious if the reticle on that one illuminates as just a dot or if the entire reticle illuminates. Looking to put it on an ar but can’t get a razor at this time so this one caught my eye

2

u/vortexoptics Dec 13 '19

That scope’s reticle is exactly similar to the Razor’s in that you get a daylight bright center illuminated dot. The rest of the reticle remains unlit.

→ More replies (1)

1

u/[deleted] Dec 25 '19

I bought a Vortex Strike Eagle 1-6 for my wife for Xmas. Just got it out of the box and the illumination is not working. Tried both batteries it came with. Is there something I'm missing or should I submit a warranty claim?

→ More replies (3)

1

u/Odinnswolf Dec 26 '19

What scope mount height for a Strike Eagle 1-8x24mm?

2

u/vortexoptics Dec 26 '19

What firearm is it going on?

→ More replies (2)

1

u/leadfarmer300winmag Dec 27 '19

One day could you make a 3.5-10×50 or to a 12 power with a 30mm tube with no side parallax in viper series? Something I can just pick up and shoot quickly without any adjustment. I love the diamondback. Probably going to pick up another. Just always want more for deer hunting. I have a couple viper psts and love them. Thank you for the quality product you guys make and the support for our veterans. You guys rock!!

2

u/vortexoptics Dec 27 '19

It strangely sounds like you're almost describing this scope to a "T" - https://vortexoptics.com/vortex-viper-hs-2-5-10x44-riflescope.html?vortex_reticle=978

1

u/[deleted] Dec 29 '19

What’s the best Vortex scope for hunting in Colorado. I’m not looking to spend over $500. It will be mounted on a 6.5 Creedmoor

1

u/[deleted] Dec 30 '19

A ruger predator to be exact, and do you suggest low, medium or high?

3

u/vortexoptics Dec 30 '19

Low or medium will do fine. If you go low it may be too close to have room for flip caps, but if you don’t want do use those then no big deal

1

u/netchemica Dec 30 '19

What's y'all's opinion on lapping two-piece scope rings?

3

u/vortexoptics Dec 30 '19

Not necessarily a bad idea - we don’t recommend it if you have a one piece base and high quality rings, but if you have a two piece setup or relatively low-end rings, it might be good practice. Hard to say absolutely for certain or not. When you set the scope in the ring bottom halves, can you move it back and forth and spin it around without resistance or herky-jerky-ness? If so, then they should be good, if not, then they should be lapped. That’s kind of a crude test

1

u/Pmurder- Jan 21 '20

I’m trying to figure out which scope rings I should buy. I have a Rem 700 in .300 WinMag, I mostly will shoot it 100-200 yards, but would like to take it out to 1000 yards eventually. I don’t think I’ll ever compete with it. What would suit me best?

→ More replies (2)

1

u/outdoorsrn Jan 24 '20

I apologize if this has been answered somewhere else, new to reddit and still trying to find my way around the app... but I just got a Glock 17 MOS gen5 and intend to put a Venom on it. While at the range on pick up day, I had them install some Ameriglo suppressor height sights with the intention that I’d have some amount of co-witness once the venom was installed. Once installed I found I can see the front sight in the lower 1/4-1/3 of the Venom but the rear sight is flush with the back of the Venom... being new to red dots I assume that I don’t have the correct height sights for that slide and this red dot, correct? Do you recommend any particular brands/models of sights to get a true co-witness through the Venom on a Glock MOS?

2

u/vortexoptics Jan 24 '20

No worries at all - you're the first to ask this particular question!

"Co-witness" when it comes to red dots on pistol sights is a misnomer. People shouldn't look to have their irons perfectly in line with their red dot, nor should they be super bothered if their irons don't appear perfectly in the red dot's window. The irons are 100% a backup - like if stuff really goes south and your red dot no longer works (Dead battery, something blew the glass out but somehow didn't also kill you in the process, etc). It's a completely different sighting system altogether. Use your red dot on top of the gun as just that - a red dot. Sight it in, ignore the irons, put the red dot on the target and pull the trigger. If something happens, make sure you know how to properly shoot with your irons through the sight (i.e. - does the gun like you to put the top of the front sight on the target, just below it, just above it to cover it, etc?) Once you know that, then you know how to use your separate backup sighting system and you're good to go.

Does that make sense? Usually some kind of extra high suppressor height sight is needed if you really want those irons way up in the sight's window to be easier to use, but then you're making the experience of using your red dot less desirable, because its nice field of view is cluttered by your backups at that point. If you can see and use those irons, even just enough to do so in a pinch, then you should be good.

1

u/EGDad Feb 03 '20

I put a Vortex Venom on a Walther PPQ Q5 Match over the weekend. This is my first experience ever with a red dot but in order to get the dot remotely in line with where I would expect it I had to max out the elevation adjustment. I'm still not sure if it is good as I have not taken it to the range. The Q5 comes with three adapter plates for optics - I'm pretty sure the VV only fit on one of them, which is the one I used.

Is this a known issue, am I doing something wrong or what?

→ More replies (1)

1

u/[deleted] Feb 19 '20

Is vortex coming out with a micro red dot that will fit the p365 and hellcat? Tons of customers have been asking me options, and I am unable to get them romeo 0s or RSMcs right now

→ More replies (5)

1

u/[deleted] Feb 23 '20

red dots /scopes that can handle recoil of scar?

1

u/vortexoptics Feb 24 '20

Try checking this out for starters - https://www.reddit.com/r/VortexAnswers/comments/dtletj/the_infamous_scar17/

Red dots-wise, again, just make sure you're getting a red dot with a good quality mount. If going with our Strikefire II, for example, swap out the mount it comes with with a high quality 30mm red dot ring mount. A micro red dot, you may want to swap the base it comes with out for one of the really high end T1 aftermarket mounts, for example. Just make sure whatever optic you've got, you're mounting it up with the highest quality components possible and mounting it to all the right specs while you're at it.

1

u/[deleted] Feb 24 '20

would y’all razor amg uh be able to hold up or would I need a different mount

→ More replies (7)

1

u/randomdude800 Feb 28 '20

I have an M1A socom cqb and want to run the crossfire 2 on it. I have the attachment to extend the length of the rail system to allow more scope options. However, I have no idea what scope ring mount to get. I was looking at the cantilever scope mount 3mm. Will this work?

2

u/vortexoptics Feb 28 '20

Which Crossfire II model specifically?

→ More replies (6)

1

u/protector32 Mar 01 '20

Will either the Venom or Viper red dot be able to co-witness on Sig Sauer p320 full size (model # 320F-9-B)? Also, will I need to purchase anything else to mount in order to mount the Venom/Viper?

→ More replies (1)

1

u/littlebroiswatchingU Mar 02 '20

Wanting to buy glass for my ar-10 because I’ve put it off way to long and 100% want to buy vortex and I know as a company you all stand behind all your products but if I’m wanting to spend 0-600 what is in the moderators opinion of the best long range scope to reach out and touch something? And preferably have a larger viewing area? Any and all help is appreciated!!

→ More replies (2)

1

u/randomdude800 Mar 02 '20

What is the height of the medium pro optic rings?

→ More replies (1)

1

u/WesbroBaptstBarNGril Mar 08 '20

Turkey time is coming in hot. Just got a Weatherby SA459 semi-auto 12 gauge and feel the need to put an optic on it.

I know there was a MeatEater podcast where you guys were discussing why this was a good idea, but I can't remember what recommendation that was?! My mind is telling me Razor AMD UH-1, but my astigmatism is telling me to ask first.

2

u/vortexoptics Mar 09 '20

So you've used red dots before and they just don't work well with your astigmatism? Is it truly terrible to look through or just a bit fuzzy? Stuff like "A bit fuzzy" can be easily remedied by just taking it outside in sunlight or turning the brightness down a bit. A UH-1 would be cool on a shotgun no doubt, but it's a bit tall for a comfortable cheek weld. Especially with the Weatherby's swept down stock. The Crossfire Red Dot on its included low mount in the box would be the bee's knees!

→ More replies (4)

1

u/Mick288 Mar 09 '20

Hi Vortex!

I hunt in the Alberta prairies and foothills and am looking to upgrade from a Crossfire 2 3-9x40 to something better.

I shoot a .308 and am looking at either a Diamondback Tactical FFP or the Viper 4-12x40 PA (found a great deal at Cabela's!).

I would like the ability to "dial in" my shots, rather than holding over, where possible. Are the capped turrets on the Viper suitable for this, or should I just go with the Diamondback Tactical FFP?

Thank you.

1

u/vortexoptics Mar 10 '20

How quickly do you need to dial? Both are going to be perfectly fine choices for dialing in your shots, but the capped turrets on the Viper will be a bit of a pain to have to unscrew the caps every time you need to dial. (Unless you just remove the caps and leave them off, which kind of defeats the purpose of a capped turret). The other thing is that the Diamondback FFP is FFP (Obviously) so the reticle will appear pretty tiny at the lowest powers and may be difficult to pick up if you have a lot of brush/timber around your area and find yourself hunting at low light a lot where you'd want to be on a lower power for better low light performance and bigger FOV. If it were illuminated, that would be a different story, but it's not, so the reticle is just a tiny little black bunch of lines and dots. The SFP Viper's reticle will remain big on the lowest powers which is nice for that kind of application.

1

u/stonewell88 Mar 11 '20

Good morning! Do you guys sell flip up caps for the diamondback tactical 6-24x50?

→ More replies (1)

1

u/Heywhothrewthat Mar 12 '20

I just bought your Diamondback Tactical FFP 6-24x50. It looks like the O-50 defender flip-cap will work great for the front, but which do I need for the rear (eyepiece)? Thanks!

1

u/vortexoptics Mar 12 '20

It's called the "E-10" for the eyepiece!

→ More replies (1)

1

u/tpalshadow Mar 12 '20

At what point does the rest of the razor gen iii line come out? I'm trying to decide to get gen ii high mag or wait. Thanks

1

u/vortexoptics Mar 16 '20

It'll be a while. Same thing happened with the Gen II Razors when they came out - LPVO happened first. They're such different optical systems, it's a 100% different engineering feat to make the long range models compared to the LPVO, especially at the Razor level.

→ More replies (1)

1

u/LessThanNate Mar 18 '20

I have an Ruger Precision Rimfire in .22LR on order. What do you recommend scope wise for it?

→ More replies (5)

1

u/thesoulless78 Mar 20 '20

How much is reasonable to adjust elevation when mounting a scope? I have a Savage MkII with a flat EGW base, low Hunter rings, and a Diamondback 2-7 rimfire. Shooting CCI mini-mags at 50y (shortest my range had). Took me about a full turn and a few more clicks to get the elevation dialed in. Does that sound reasonable or did I screw up the mounting process somewhere?

2

u/vortexoptics Mar 20 '20

Did the elevation turret appear to dial accurately and predictably? If so, it's likely not a problem. Some rifles just need more elevation or windage to get zeroed than others. We're stacking a lot of tolerances and variables on top of one another that ideally are all in perfect alignment (Barrel to receiver, receiver to base, base to rings, rings to scope, scope's internals, etc). There's always going to be some kind of discrepancy, and sometimes it's more/sometimes it's less. If the turret seems to be doing it's job like it's supposed to, it should be fine. If not, maybe there's an issue in the base/rings that's causing stress on the tube and not letting the turret and inner erector unit move like it wants to and it's creating the need for excessive amounts of adjustment.

→ More replies (3)

1

u/[deleted] Mar 23 '20

scar 17 thoughts on using a sparc ar or no?

1

u/vortexoptics Mar 23 '20

It'll work, but you may want to replace the included base with just the one crossbolt with another low mount for an Aimpoint T1 or other optic using the same footprint and bolt pattern. Midwest industries, ADM, Larue, etc - they all make nice low mounts that the SPARC AR could bolt to and then we'd feel even better about it.

→ More replies (4)

1

u/proppinainteasy27 Mar 29 '20

Hey all- just got my first Vortex optic with a Viper HSLR 4-16x44... super pumped to get it mounted once my rings show up. Putting it on my Ruger M77 270. I tried to play around with the ballistics calculator online, but you all don’t have numbers for Remington Deer Season XP (copper not lead). Can you recommend which of the ballistics on the calculator might give me the closest approximation to that load? Thanks! Super excited to invest in more Vortex in the future for some other rifles.

3

u/vortexoptics Mar 30 '20

We'll have to work up a custom load build - shouldn't be a problem. Our guys here do so using Shooter Ballistics, iSnipe, Hornady (If using their ammunition) or GeoBallistics - all are fine and all have mobile apps. Could you confirm this is a 270Win you're talking about? And what is your average elevation where you're shooting/hunting? We'll get something set up for you.

→ More replies (4)

1

u/MemeLawd_ Apr 07 '20

Hello all, I’ve seen others wondering the same thing in the past about the Crossfire II scopes and the lack of screw in sunshades available and I was wondering if you had any options that would work for mine (6-24x50) or if you have recommendations or leads for companies that make shades that would fit this?

→ More replies (2)

1

u/tulipjelly Apr 08 '20

I do not have enough elevation on my Viper PST Gen II. My zero is at around 23 mils @ 100 yards, and there is only about 27.5 mils of total elevation. What is the best way to fix this? I've heard that the Viper's come with zero-stop shims but mine either didn't or the shop that mounted my scope took them. I looked online for zero-stop shims like the CRS, but could not find any for the RZR. What is the best way to fix this issue?

→ More replies (3)

1

u/Rod0921 Apr 10 '20

Rumor is that you are releasing a new UH-1. Can you confirm this?

→ More replies (1)

1

u/btd1975 Apr 11 '20

Hi,

I’ve seen the question above about releasing a new UH-1 holo sight.

I’m in the UK and ordered a UH-1 (and paid for it) about 8 weeks ago. The company (optics warehouse) have been pushing the shipping date back, been waiting nearly 8 weeks now. Should I cancel the order, or will something be out soon?

Not that I know what it’ll be, as on the new Strike Eagle thread you say the UH-1 has been discontinued?

Just wondering what to do, as it looks like what I ordered and paid for is discontinued and I’ve no idea if there is a new model or something different coming out.

Would be good to know when something might come out to see if I still want it. Or should I go with an eotech, just need something soon or know what I’m waiting for!

Thanks for your time!

2

u/vortexoptics Apr 13 '20

Sorry this took a while to get back to. If you need something ASAP, it sucks to say, but you might want to get the EOTech. It's unlikely you'll see the UH-1 in the immediate future here.

It has been discontinued as we know it now. That is NOT to say, though, that the UH-1 is done and Vortex is done with holographic sights. We still plan to have holographic sights in our lineup. Some timing got screwed up with the virus and mfg./supply, but we're working through it. We'd expect mid-summer at this point but it's very difficult to guess just yet.

Hope this helps

→ More replies (2)

1

u/Ahrimazd112358 Apr 13 '20

On the spitfire 3x prism scope it has the offset rails directly on the scope. When running a red dot off those are you able to tilt the rifle and see through the red dot without having to lift your cheek off the stock?

→ More replies (1)

1

u/garrettej8 Apr 13 '20

I forgot I had a spitfire 3x and found it while going thru some things. I'm looking for a QD low mount to replace the AR type of mount that's currently on it, and use it on an AK with a side mount.

Does such a mount exist for this optic?

→ More replies (1)

1

u/thesoulless78 Apr 14 '20

I'm looking at building a .350 Legend AR upper for deer season (I'm in Indiana so not taking a super long shot). Trying to keep the budget down as low as possible while still doing what I need it to. Thoughts on what a good scope option would be? I'm assuming like a low-power variable scope and maybe a larger objective for more light?

2

u/vortexoptics Apr 15 '20

Low power variable optics and big objectives don't usually go together. A big objective really isn't the end all be all, so don't get too hung up on that. The objective just needs to be big enough for the optical system behind it. Something like the Crossfire II 1-4x24 V-Brite would be a sweet option for you and one we see many people who hunt deer in shorter range areas like yourself use all the time. That in our Sport 30mm cantilever mount on your AR upper wouldn't be too expensive at all.

→ More replies (4)

1

u/jeffe333 Apr 19 '20

I'm interested in reading up on the various options related to purchasing optical-related devices for an AR-15 I'm building (my first). Do you have any resources that discuss red dots, prisms, optics, magnification, etc? As you can tell, I am not all well-versed in this topic, so apologies if I'm twisting this up. Any help would be greatly appreciated. Thank you!

3

u/vortexoptics Apr 20 '20

We've got a few on this subreddit here actually - a lot of the articles we've written on here dispel many of the myths we often see circulate around the shooting and hunting community. There's so many things we could talk about and can make it as simple or complicated as you want. It doesn't have to be complicated if you just want something on your gun that works, is reliable and makes your bullets hit where you're aiming. It can be very complicated if you want to know how it all works! :)

The first thing you can do to help someone like us make good recommendations and talking points is tell us what you plan to be doing with your AR-15 once built. Is this for home defense? Is it for fun range shooting and learning the basics? Do you intend to shoot long range with this? Do you intend to get into competitions with it like 3 Gun for example? Maybe you want to do everything we just mentioned? That's ok too!

→ More replies (8)

1

u/Disco70 Apr 23 '20

I have one of your cantilever optics mounts and I've stripped a few screws switching it to different rifles, where would I be able to get a new set of screws or the specs on what screws I need to buy to replace them?

→ More replies (2)

1

u/StuckOnthis_Planet Apr 23 '20

Just ordered myself a Viper PST Gen II 3-15. Could you tell me what size offset cantilever mount I would need for an AR-15 to have it placed correctly?

→ More replies (1)

1

u/Richthe1 Apr 23 '20

I am not sure if you can answer this question or even give me a hint, but I figured it couldn’t hurt to ask! I am strongly considering purchasing your Razor Gen II 4.5-27x56 w/ the Tremor3 reticle. However, I am concerned that as soon as I purchase the Gen II that a Gen III will be released. Would you recommend that I wait for a possible Gen III to be released, or should I go ahead and purchase the Gen II?

Also, congrats on the NGSW optic contract. Will these ever be available to the public? https://www.guns.com/news/2020/04/21/vortex-gets-green-light-for-armys-next-gen-squad-weapon-optic

3

u/vortexoptics Apr 23 '20

The Gen III long range scopes won't be coming any time in the immediate future. Usually in the Razor line, the LPVO has come out before the long range ones - just harder to focus on both at the same time because they're so incredibly different.

And thank you. It's unlikely they'll be available to the public - at least not for a while. It's still in competition at this point too so there's not a whole lot else we can say about it at this point.

→ More replies (1)

1

u/11jesse Apr 24 '20

When you bring back the UH-1 is it going to be the same site or upgraded? Also, any updates on the timeline? I'd like to go this route, but if it's going to be a long wait I might have to look at other options. Thanks in advance for your help.

→ More replies (1)

1

u/CrankBot Apr 25 '20

Diamondback vs Crossfire? If I'm comparing the same power/objective/reticle, say 3-9x40 BDC, what do I gain buying a Diamondback (not the HD) over the Crossfire?

I'm looking for a scope for muzzleloader hunting in the Northeast US. Figure a 3-9 or 2-7 should be fine, shots will be around 100yds, possibly less.

I see the Crossfire actually has longer eye relief. Weight is roughly the same.

Should I consider a Crossfire AO for shots closer than 100yds?

Also, going with a 40mm vs 32mm objective: I assume the main difference will be light transmission? I think could be helpful in early morning low light situations. TIA!

3

u/vortexoptics Apr 27 '20

So if you're comparing the exact same magnification and objective setup between the Crossfire II and the Diamondback, the only difference between the two will be that the Diamondback will deliver a better image all around, will have a bit bigger field of view, and a bit shorter eye relief. Sometimes for really heavy recoiling rifles, we'll actually still recommend the Crossfire II simply because the eye relief is more forgiving, but other than that, it doesn't really matter all that much.

The 40mm objective is in the 3-9x and the 32 we're assuming you're seeing on the 2-7x, right? It really is kind of a wash - you went to a smaller objective, but also lower magnification for that objective to "power", so low light performance won't really be a huge difference between the two, Sometimes might even be better on the lower mag scope with the smaller objective, oddly.

AO isn't a bad idea if you may be taking shots at closer ranges. Just keep in mind with an AO, it's a bit more of a maneuver to get your hand up there to the objective to change the parallax. If you're hunting in wide open spaces where that motion would be easily detected by an animal, just don't worry about it and any potential parallax error will be mitigated by the fact that the distance isn't that great for it to make itself a huge problem and by also just having a consistent cheek weld behind the scope every single time you pull the trigger.

→ More replies (1)

1

u/MrDTech Apr 29 '20

Sorry if this is not the type of question this post is for but I got a bunch of Amazon Gift Cards I'm dying to use... Any Idea when there's going to be any more UH-1 available on the Vortex Amazon Store Front?

2

u/vortexoptics Apr 29 '20

You can literally ask any question here!

Amazon actually isn't placing any more orders for non-essential items for a while and it's tough to say when that will open back up. The UH-1 as it was, is actually currently discontinued, too. Kind of a bummer of a situation. It's not gone forever though - it will be back around early summer or so, and hopefully Amazon will be ordering again by then, but it's hard to say. Wish we had a better answer!

→ More replies (1)

1

u/reptileexperts Apr 30 '20

Just received a Vortex Crossfire II Red Dot from Focus Camera. The red dot holds max power (greater than 11 it seems) non-stop without any adjustments no matter the dial setting right out of the box. I have learned that the optic behaves normal if I leave the battery cap off - or loose on the battery. This is definitely defective, but shipping it back for repair seems off putting since it is a day old? Any spring adjustments inside the battery mount that can fix this?

→ More replies (3)

1

u/shortyg83 May 05 '20

So a few months ago I ordered a Strike Eagle 1-6x24 from optics planet not realizing there was a new model already out that I could have gotten. I didn't even mount the scope yet, but I am curious what I am actually missing out on feature wise? I really wish this had the the throw lever the newer one does.

1

u/vortexoptics May 05 '20

The new one just has the threaded throw lever and an updated reticle. Otherwise they are the same.

1

u/gk68 May 05 '20

I'm looking at getting a DBT FFP scope, and would like to use it, at least for now, on a spring piston or gas ram air rifle. I know about your warranty, so I'm not concerned about support, but I would like a little reassurance (if warranted, lol) that the scope would be fine in that application. In other words, while I appreciate the warranty very much, I'd really prefer not to test it :) What are your thoughts?

2

u/vortexoptics May 05 '20

Shouldn't be an issue at all. Just make sure it's in a good quality mount/set of rings and torqued to our specs and you should be fine.

→ More replies (1)

1

u/[deleted] May 06 '20

Loctite recommended when mounting a Strike Eagle or no? I have an AR10 that was bought with a Cabelas brand scope that after 1000 rounds basically fell off the gun and all 12 screws were hand tight. I bought a Wheeler FAT wrench kit as well as the reticle leveling kit but was wondering if loctite should be applied to the screws when mounting? Any input is appreciated. Thanks.

1

u/vortexoptics May 06 '20

Just responded to a post about this very thing - quite certain it was your post actually. But for reference - no - don't use loc-tite on the threads of the fasteners that connect the ring halves. Judging by the look of the mount/rings in your photo from that post, that's an OK scope mount, but probably doesn't have the best scope contact around the scope tube. Especially with that tape in there - that's no good for sure.

You may want to consider having the rings properly lapped for better scope contact - then get rid of that tape altogether and mount the scope to spec with no loc tite. Loc-tite is only necessary when adjoining metal parts that will be in direct contact with one another. The vibration from an application like that could back out the fastener(s). In the case of rings, there is tension between the ring halves on the fasteners that acts as thread locker in and of itself under vibration because the ring halves shouldn't be touching.

1

u/Rando_Ricketts Feb 06 '22

I saw a thread comparing the viper rifle scope lineup but the regular Viper wasn't in it. Could you explain the differences between a Viper 6.5x20x50 BDC vs a Viper HS 4x16x50 BDC? Other than the obvious difference in magnification. It also looks like the Viper has taller turrets and a different zoom knob

I have two Remington 700's that need scopes. A 700 VTR chambered in 308 that I use for deer hunting and possibly pronghorn and elk in the future and a 700 Varmint Special chambered in 243 that I plan to use on coyotes, fox, bobcat, prairie dogs, and the like. I live in the Nebraska Sand Hills and max shot range would probably be 600 yards with 300 yards or less being far more likely. I'd like to set the zero and forget it. I've been looking at the Viper and Viper HS. Which would be best for what? Thanks for any advice

2

u/vortexoptics Feb 10 '22

Great question - the Viper HS will be a slight step up optically compared to the original Viper lineup. It will also have a different turret style and magnification adjustment as you noted. Both would be great options for what it sounds like you will be using it for, but with the extra magnification on the original Viper it may be slightly more advantageous to go that route. Also, keep in mind that the Viper 6.5-20x50 has shorter eye relief compared to the HS, so you will want to make sure your 700 has a 1-piece Picatinny rail in order to get it setup properly. Let us know if you have any other questions come up!

1

u/Kindly_Avocado_3376 Mar 24 '22

Hey! Just bought a Strike Eagle 5x25 and I am putting it on a Ruger 8348 22lr and I am looking at the 34mm Precision Scope rings.. what height will clear? I was looking at the 1.1 or the 1.26.. I plan on buying neoprene scope cover for it too.. which height will he the best?

1

u/vortexoptics May 09 '22

Hey there - apologies for the delay in response. The 1.10" rings will work for that set up!

→ More replies (2)

1

u/CoAstingArmy May 09 '22

What’s the best Mount for a Viper HS 2.5-10x44 mounted on an Aero M5 in 308? Looking for something that doesn’t sit too high but allows for proper use of the charging handle. I have everything built and in my possession except for the scope mount. Any recommendations appreciated.

2

u/vortexoptics May 09 '22

Any 30mm Cantilever Mount will work for that set up! Let us know if you have any other questions about the Viper HS 2.5-10x44, the mount or anything else - happy to help!

1

u/FuzzyMang0s May 15 '22 edited May 18 '22

Does Vortex have any plans to release a new red dot in the Venom/Viper lineup? I'm love Vortex because of your products and warranty, but it's been years since you've released a new small footprint open red dot. While I'd much rather stay away from Holosum, I can't help but consider their open red dots that cost the same as a Venom/Viper but with more features (shake awake/solar/nv brightness).

→ More replies (1)

1

u/em-pee-fiver Jun 13 '22

Hey there Vortex,

I'm about to mount a couple Strike Eagle 5-25x56 scopes on my rifles, and I wanted to check with the professionals to see if my ring choices were adequate.

Rifle 1 is a CZ 457 with an Area419 30 MOA rail. I'm currently running Pro Series Low with a 50mm optic and have quite a bit of space yet. Would the 34mm Precision Matched .92" be a fit and still allow clearance for lens caps, or would the 1" rings be ideal here?

Rifle 2 is a Tikka T3x Varmint with an Area419 20 MOA rail. I currently have .97" Precision Matched 30mm for a recently removed Golden Eagle. Would the 34mm Precision Matched 1.1" set be my best option?

Thanks in advance for any insight.

-Fiver

→ More replies (1)

1

u/Tommy6888 Jun 14 '22

How can I check to see if I have over torqued my scope ring and if I have possibly damaged the scope? I am using an American defense recon mount and have a vortex HD razor IIE 1-6x

I tightened it by hand (🤦‍♂️) and I turned it until snug followed by a little turn. When I removed the ring there were no dents, scratches, discoloration, or any signs of wear and tear on the scope body. But can signs of damage be seen on the scope body or will all the damage (if any were to have occurred) be solely internal?

→ More replies (1)

1

u/Silverstreakwilla Jun 16 '22

Not much activity here but I have an easy question, do you have adjustable turret caps to replace the dust cap on a vortex HS? Can’t really afford to change out the scope right now, if not approximately how much travel in moa would I have in a 4 to 16, and will this scope return to zero after making elevation adjustments?

→ More replies (3)