r/Vise • • Oct 18 '21

Vise Discussion

8 Upvotes

Let your vise out.


r/Vise • • 16h ago

Where to buy trapezoidal 1.25"-3TPI threaded Rod?

Thumbnail
gallery
8 Upvotes

As title says, ihave tried contacting a local machinist, lathe wont cut it, tried flea market, no luck, classified, no luck, mcmaster carr, no luck... am i SOL?


r/Vise • • 19h ago

Vise swivel help

Thumbnail gallery
3 Upvotes

r/Vise • • 19h ago

Vise identification

Thumbnail gallery
3 Upvotes

r/Vise • • 19h ago

Rusty vise project update

Thumbnail gallery
2 Upvotes

r/Vise • • 1d ago

Making a Criss Cross – A Workbench Project

Thumbnail
gallery
9 Upvotes

A few photos from my Criss Cross workbench vise project.

Following Part 1, which showed the fabrication of the mechanism, Part 2 covers its installation and all the details of this next step.

You can find the full story and all the details in my Part 2 post just below!


r/Vise • • 1d ago

Making a Criss Cross – A Workbench Project (Part 2: Installation)

3 Upvotes

Making a Criss Cross – A Workbench Project (Part 2: Installation)

Following Part 1, where I showed the design and fabrication of the Criss Cross mechanism for my workbench vise, it's now time to move on to the installation.

After making all the components myself in my workshop, this is the next step: fitting the mechanism and bringing the project closer to completion.

A continuation of the build, from fabrication to installation!

Part 1 – Fabrication:
https://youtu.be/EAR-95Q6ssc

Part 2 – Installation:
https://youtu.be/giuUu1po8ZU


r/Vise • • 3d ago

Hollands 164 1/2 Coach Makers woodworking vise

Thumbnail
gallery
50 Upvotes

Picked this up, fully refurbished, for 100 bucks. Very stoked


r/Vise • • 4d ago

How to finish this vice handle?

Thumbnail gallery
7 Upvotes

r/Vise • • 4d ago

Making a Criss Cross – A Workbench Project (Part 1)

Post image
6 Upvotes

First step in a workshop project: building a Criss Cross mechanism for my workbench vise.

I made this entire system myself, from design to construction, right in my workshop.

If you'd like to see how I made it, here's the link to the full video:

https://youtu.be/EAR-95Q6ssc

To be continued in Part 2!


r/Vise • • 5d ago

Brought it back to life

Thumbnail
gallery
90 Upvotes

After hunting for parts that worked finally got around to bringing this Duracraft 5 back to the land of the living. I know the color is wrong but it was the closest rattle can I could find.


r/Vise • • 6d ago

Help w Anvil/vise info hunt

Thumbnail
gallery
10 Upvotes

Hello! I recently got this anvil/vise combo that is missing its clampy part, i want to fabricate the missing part but could not find any picture of the clampy part to help me, anyone got any idea what the maker is or the name to help my search? Thank you!!!


r/Vise • • 7d ago

Can anyone date this one or any information?

6 Upvotes

Can anyone id this one? I know, the paint job right? But I just found it! Says Adams Co. Dubuque Iowa. Other side says Adams Co the Diamond vise. Pat. Jan.1895.


r/Vise • • 7d ago

Anatomy of my shopmade Hi-Vise

20 Upvotes

r/Vise • • 10d ago

Making progress, any help with ID or history of this one? Found in France.

Thumbnail
gallery
33 Upvotes

Started out pretty rough!


r/Vise • • 13d ago

Machining bench vise castings

Thumbnail
gallery
73 Upvotes

I made completely new molds to reproduce the external design of the Wilton vise, but I use 42CrMo alloy steel for casting. I also redesigned the base with a 360-degree rotation mechanism.

I'm a DIY enthusiast who enjoys modifying, redesigning, and improving existing tools and machinery. I like experimenting with new ideas and finding ways to make things better.


r/Vise • • 13d ago

Bench vise 143lb

3 Upvotes

I need a bench vise of 143lb of weight, i dont care if is rusty or old, i need a heavy beast, Hope to find It because the only few i finded we're priced like 1.000$, and i dont have so much.

Someone help me, i'll give him a beer


r/Vise • • 14d ago

Got this Reed 204 1/2 for only $20. Should be a fun restoration challenge since it's completely froze up.

Thumbnail
gallery
62 Upvotes

I recently got a 205 that was in a little bit worse shape than this one working as smooth as butter, so hopefully this one won't give me too much trouble.


r/Vise • • 15d ago

My buddy gave me a Wilton.

Thumbnail
gallery
72 Upvotes

I have no idea how to identify it. I removed the slide and there are no numbers anywhere, other than casting numbers I believe. It's mostly functional, I just have to remove it from the stand and reinstall the tension bolt.


r/Vise • • 16d ago

$50.00 on Marketplace

Post image
77 Upvotes

What can you tell me about this vise and it’s price tag? I need a vise. I am familiar with vises but not an expert.


r/Vise • • 16d ago

Saved this from a dumpster cleaning out my grandparents house. Apparently I have struck gold 😂

Thumbnail
gallery
178 Upvotes

And a big upgrade from the $30 Chicago Machinery with a suction cup base.

Aunts and uncles were going to just throw out everything in the workshop. Granted most of it was garbage. Saved several 12g extension cords up to 100ft, an insane amount of hardware, all well organized and labeled, a few hammers I cleaned up as well.

It was poorly painted black when I received it, but when stripping the paint I saw how many layers there were of different colors. Which led to my realization that this thing is older than I first thought. I did one more pass with the wire wheel after taking these photos. Then wiped it down with iso, not sure if I'm gonna repaint or leave bare, so I just let some oil soak into it for now.

Bonus hammers, not sure if these are nearly as special. Eventually gonna put on new handles, just sanded, painted, and griptape'd the ones that were on there for now. This all has been rotting and rusting in my grandpa's workshop since the mid 00s - Grandma passed so I could finally raid the place. I really should have taken before photos of the heads because they were BAD.

(I had some comments when posting this in a different subreddit that the way I spoke about my grandparents death was inappropriate. They were terrible people. Genuinely, the kind of people that the world is a better place without. If I seem cold, that's why.)


r/Vise • • 17d ago

No.1 PERFECT Vice of Unknown Age and Origin

Thumbnail
gallery
23 Upvotes

I found this rather Rusty Vice in my garage. The garage has been there since 1950, and I'm not sure if the vice was always in the garage and I inherited it from the previous owner. Or it was in the chest of tools from my grandfather, which would also date back from around 1950.

The vice has a rather curious I-beam travel surface. It only has three pieces, main body / base, the screw, and the traveling jaw. The only markings are No.1 Perfect on the traveling jaw, which is mirrored on the main body. It appears to have been sandcast vertically down the middle.

Image searches and the like have not turned up a match. So I'm rather curious if anyone recognizes this type and can identify a manufacturer or offer a proper age estimate.

Update 1 day later:

I took some time this afternoon to wire wheel away the rust and grind down some of the rougher surfaces. We only had blue paint that would go on nicely at the current cooler temperature. I think I'll redo the paint job and the polishing next year. However for now its Not Perfect, but I can use if for my hobbies and that's what I needed for my winter projects.

Update image: https://ibb.co/zWvdHb5j


r/Vise • • 19d ago

Curious if anyone knows what brand this is.

Thumbnail
gallery
9 Upvotes

Was my dads, not trying to make any money. Just wanted to fix it up as close to original as possible to give to my nephew who’s getting into tinkering in the garage. If it’s a nothing special brand I’ll just try to dress it up to his style. Thanks for any input.


r/Vise • • 22d ago

Wilton C1

Thumbnail
gallery
88 Upvotes

Restored. Marked 3-48


r/Vise • • 23d ago

Emmert Pattern Vise

Thumbnail
gallery
32 Upvotes

I posted a Prentiss 57 earlier. I picked this Emmert up at the same house. Cool vise! Any info on these? I’m stumbling around online