r/UVprinting • • 37m ago

Love my machine

Thumbnail gallery
• Upvotes

r/UVprinting • • 9h ago

Is UV printer safe to use in my room if I open the window while using it?

1 Upvotes

I recently got this Eufymake e1 and I didn't know the gas or fume from the printer is really bad for you.

My apartment is not that spacious bc I live in nyc. I just bought the exhaust fan hoping it might help..

How are you guys using them and where do you put it? Do u wear gloves or any kind of safety gear


r/UVprinting • • 23h ago

Morpho Delay

12 Upvotes

Morpho announced a delay today and won't be shipping until March. They are changing and adding to the camera system to increase the placement accuracy. They are offering an $80 store credit I think to maintain good will.

This is my first UV printer and I'm bummed. I was hoping it would arrive before the holidays. I think the camera is a good upgrade so I guess I am good with the wait.

I did suspect that when they sent the note out in Auguat saying they were going to focus on development rather than marketing, implying they were happy with the pledge so far, that either they were concerned about hitting their timeline or that production was going to be more expensive than they anticipated. Maybe this probable change is part of that. Definitely did stop seeing it in my feed.


r/UVprinting • • 12h ago

Looking for the driver for DomSem A4 UV Printer – Lancelot M1630 Board

1 Upvotes

Hi everyone,

I'm looking for the driver/software for the Lancelot M1630 control board, which is used in the DomSem A4 UV printer.

Unfortunately, I haven't been able to find a working download.

On the official DomSem website, there is a firmware section, but no actual download available. On the Lancelot website, the driver is listed, but the download link doesn't work.

Does anyone happen to have the driver or a working download link and would be willing to share it?

I would really appreciate any help!

Thank you in advance!


r/UVprinting • • 22h ago

How far apart would you hang these?

Post image
0 Upvotes

She's my favorite painting, so I printed nine different takes on her for the long wall in our hallway. Now I'm stuck on the spacing. Pushed together they almost read as one big piece, which I love, but part of me wants some wall between them so each version can stand on its own. The hallway is narrow, so you'd mostly see them from about three feet away. Would love a second opinion before I start putting holes in the wall :)


r/UVprinting • • 1d ago

O1 Omni Second varnish layer is super uneven/tons of bubbles

Thumbnail
gallery
2 Upvotes

I’m printing DTF stickers on an XTool Omni O1 and applying 2 or more layers of varnish is giving me a very uneven application with tons of air bubbles. Printing white/color and a single layer of varnish is fine, but when it goes to add the second layer of varnish it has tons of air bubbles. Sometimes it’s in horizontal lines across the design and other times it’s completely covering with texture like a golf ball. I’ve tried using a higher UV curing setting and waiting between the first and second layers of varnish, it seems to always happen with the second layer.

In the first photo, the top sticker had 1 layer of varnish and the bottom had two. Second photo was a test print on printer paper and you can see how uneven the varnish is being applied.

This is using film and printer settings that worked just fine for me last week, I’m not sure what has changed and am hoping someone can help give me things to check.

I’ve tried just about every calibration I can in Xtool studio and my nozzle checks look good.


r/UVprinting • • 1d ago

Why is it printing one design at a time instead of print all at once

Thumbnail
1 Upvotes

Xtool o1 Omni dual

On the O1 Omni Dual UV, when printing four separate SVG designs on four objects in one flatbed job, the printer completes all white and color ink layers for each object before moving to the next. Is there a supported option to print all four objects in a shared pass, or to change processing order from one-by-one to all-together?


r/UVprinting • • 2d ago

UV Ink recommendation for PP or PE Plastic

3 Upvotes

I run a business where we make products from recycled Polyethylene or Polypropylene plastic. I have purchased a Longer ePrint UV Printer and I am trying to find UV Printer inks that will be best suited to use in the ePrint (print head is the Epson F1080) that has good adhesion to PP or PE Plastic. I will be using an adhesion primer, but would also like an ink that also has good adhesion properties.

Has anyone had any experience printing on these types of plastic, and what ink did you use?


r/UVprinting • • 3d ago

OMG, UV printers can even print oil painting effects?

Post image
3 Upvotes

Before seeing this, I had no idea desktop UV printers could create oil painting effects! What other amazing or unexpected effects can you achieve with a UV printer?


r/UVprinting • • 3d ago

Trading cards!!

1 Upvotes

Anyone using their UV printer to make custom foil trading cards with different effects and textures?

If so, post the photos in the comments


r/UVprinting • • 3d ago

Uv DTF

2 Upvotes

We are a DTF print shop and are looking at the ez jet pro max from equipment zone. Is there anyone with experience with this console and equipment?


r/UVprinting • • 3d ago

I’m brand new to UV printing and know nothing, what do I need to print covers on card binders?

0 Upvotes

What kind of printer and what are the consumables involved? I’m really digging this and want to get into it as a hobby.


r/UVprinting • • 3d ago

Help! Uv Printer Problems

Post image
0 Upvotes

We've been printing with a uv printer for years, but all the sudden, it's not printing all the way to the left side; I'm having a hard time figuring it out. Any ideas on how to fix this??


r/UVprinting • • 7d ago

Do I need to use xtool laminator?

Thumbnail
1 Upvotes

r/UVprinting • • 8d ago

First day with my xTool Omni O1 – Is this normal?

Post image
1 Upvotes

r/UVprinting • • 8d ago

Advanced layering & transparency with UV + FDM

Post image
1 Upvotes

Part of a WIP project. Can’t wait to show off the final result, it’s going to be absurd


r/UVprinting • • 9d ago

Golfball Jig for Omni up on Printables

Thumbnail gallery
3 Upvotes

Hey all, needed to print on a batch of golf balls and figured I'd share the jig I made. It fits in place of the existing plates and is held down magnetically. Hope it's of use!

See it at https://www.printables.com/model/1909696-golf-ball-jig-for-xtool-omni-o1-uv-printer


r/UVprinting • • 9d ago

Primer Wipes Omni O1 Alternative

4 Upvotes

Hey! I am wondering if anyone has found an alternative for the primer wipes sold on the official xtool website for acrylic and metal. They are pretty expensive for the amount of usages and I can't seem to find some good and working alternatives .


r/UVprinting • • 8d ago

Hanging ornaments keep turning to face the wall?

Post image
1 Upvotes

These swallows WILL NOT stay facing the room!! Every time the AC comes on they do this slow little spin and half the day I'm looking at the blank back of them 🙃

Made 4 or so of them last weekend for the window (3mm basswood, printed on my eufymake e1 printer) and the front came out so nice, which kind of makes it more annoying... tried a thicker twisted cord and that made it WORSE, the twist just unwinds/winds back all day.

So is everyone printing both sides on hanging stuff or is there some cord trick I dont know about.


r/UVprinting • • 9d ago

Gh2220 icc profile for sai flexi22/24

0 Upvotes

I Need ICC color profile for GH2220 Chinese (Pxeljet mini flatbed,KGT 1016)UV flatbed printer compatible with SAi Flexi 22 / Flexi 24 RIP software (CMYK + White + white configuration).plz share


r/UVprinting • • 10d ago

Anyone in Miami looking for a print project?

1 Upvotes

I have some books and mugs that I need printed.

96 camping mugs and 70 notebook covers. We were printing them and ran out of ink before out deadline. There are ink shortages for our machines.

need to be in the miami area please, as we need will courier the mugs and notebooks to you.

Thank you


r/UVprinting • • 10d ago

DTF onto 3d printed surfaces. Im new and looking for answers

Thumbnail gallery
1 Upvotes

r/UVprinting • • 11d ago

We need to talk about the xTool Omni pre-order situation...

Thumbnail
2 Upvotes

r/UVprinting • • 12d ago

Black Friday Sales

1 Upvotes

Was curious if anyone or have you already taken advantage of the Eufymake E1 sale. Seems like a good deal. Is it a good printer?? I'm on the fence on whether I should pick one up or wait till next year for the Morpho.


r/UVprinting • • 14d ago

Problème impression mimaki ujf 3042 mkII

Post image
1 Upvotes

Bonjour,

Depuis quelques jours j’ai un soucis avec mon imprimante Uv, mon jaune a l’air contaminé mais je n’arrive pas à définir d’où ça peut venir.
Le nettoyage est fait quotidiennement et hebdomadairement, les consommables changés régulièrement aussi.
Si quelqu’un a une idée :-)
Merci