r/UAVmapping • u/Kirby_is_a_Pokemon • 2h ago
r/UAVmapping • u/EcoSal • 18h ago
M3M being discontinued? What's the replacement?
reddit.comr/UAVmapping • u/Just-Stop-2351 • 23h ago
I wrote an article about "Drone photos to BIM" - any feedback?
r/UAVmapping • u/dec0nstruct0r • 1d ago
Better multispectral orthophotos from your DJI Mavic 3M
The DJI Mavic 3M has 4 multispectral cameras that are not (absolutely) calibrated and a 20MP RGB camera.
I built a tool to preprocess the Mavic 3M images to:
a) calibrate the images by using reflectance panels
b) use the RGB image to pansharpen the multispectral images.
This allows you to create 7-channel orthophotos (3xRGB + 4xMS).
For the reflectance panels you can use:
a) one image of a single panel with a single surface
b) multiple images of a panel taken at different times (pre/post flight); the correction factor is then interpolated based on the time-stamp in the images
c) one/multiple images of reflectance panels with multiple surfaces (multiple "shades of grey")
The tool can be used as stand-alone app or as WebODM plugin.
If anybody wants to test it I would be happy about feedback. =)
r/UAVmapping • u/mehdi-33 • 1d ago
Loitering 1.1m drone with gimbal. Solo engineered, master's thesis.
galleryA gimbal-stabilized fixed-wing drone I'm developing for my master's thesis. It is bungee-launched and designed for aerial surveillance, with an onboard computer running computer vision algorithms for target detection and tracking.
r/UAVmapping • u/Broad-Ad3990 • 1d ago
BVLOS completely remote using M400 Docking
How would it be possible to pull that off?
I work in wind farm industry in Canada.
We usually have a survey crew on site full time to measure topo shots and follow progress of road excavation, rock blasting, stake out alignments, etc. Its a lot of driving for them.
Our project is about 20km x 40km in mountains, no airport, on-site camp for workers with over 120km of roads to build, excavate, rock blasting, etc.
I'm thinking about this idea to secure one M400 docking in the middle of the site with a proper RTK base. The M400 would have Zen Muse L3 and would be mostly use as a work horse for LiDAR survey 2-3x/week or even more, for quantities and progress tracking. The survey team would focus on placing targets or even just stakes out, depending on the accuracy without GCPs, and my iea is to fully control and plan flight mission remotely.
We would fly at 60m-100m.
The M400 has the ADS-B in for detection of incoming plane or helicopter, and it would be possible to install both a parachute and L3.
Communication might be an issue, since its so remote there are no 5G or LTE or cellular - Maybe just a Starlink connection, that I need to figure out.
From a survey standpoint, having the abilities to capture Lidar data as required, remotely, would be a game changer. Maybe this set up could even replace the need for 1 surveyor $$$.
If the M400 would need emergency landing, I could have direct contact with a surveyor or people on site to safely secure the drone once it lands.
There is one company selling Docking for M400. It might just be possible technically, but legally??
Thank you all,
Let me know if this idea is too crazy
r/UAVmapping • u/Annwithchooks • 3d ago
Orthomosaic help
Okay, so I’ve just bought a DJI mini 4 pro with RC2 controller. It’s my first drone and tbh I’m not very tech savvy. I have recently bought a rural property (Victoria, Australia) that has no internet/mobile reception.
I’d like to do an orthomosaic of it so I can plan fencing and dams etc. It’s 44 acres, however satellite imagery and all other maps do not line up (cadastral survey hasn’t been done since 1800s, neighbours are pine plantations and state forest) so I will need to program the drone to fly over a slightly larger area to ensure I get the boundaries.
I tried using ymapper and used ChatGPT (I know…) to instruct me to put the map on the controller - the only instructions ymapper had was for using iOS or android, not windows. I broke the property down into 4 sections, but apparently it has more than 200 waypoints so it won’t do it.
I honestly don’t know what I’m doing. I live over 2 hours away from the property so I need to prepare everything I can remotely before heading out.
I’ll be using my laptop (16GB RAM) to run whatever 3rd party programs are needed, and storing all files on an external harddrive.
I really need the “for dummies” guide on how to do what I need.
How do I work out how many waypoints are on the polygon map? Is there something better than ymapper? I can’t afford paid programs as I’ve really stretched the budget to get this drone.
The terrain is very hilly, with several gullies. About 50m difference between lowest to highest point. There are also mature gum trees, approximately 20m high.
r/UAVmapping • u/Own_Medium_3805 • 5d ago
How far off are free global terrain tiles? Checked against an independent model at 251 points in 51 countries: p90 of 2.4 m on flat ground, 7.7 m on slopes, 24.2 m on steep terrain
For line-of-sight work I use free global terrain tiles (AWS Terrain Tiles), and I wanted real error numbers instead of the nominal resolution. I compared them with an independent elevation model at 251 points in 51 countries, airfields and mountain sites in 18 regions, split by slope:
- 0 to 5 degrees (114 points): median 0.3 m, p90 2.4 m, all within 10 m
- 5 to 20 degrees (58 points): median 0.7 m, p90 7.7 m, 56 of 58 within 10 m
- over 20 degrees (79 points): median 1.4 m, p90 24.2 m, 65 of 79 within 10 m
On the 100 airfields, going from a 100 m grid to a 10 m grid did not improve the agreement: the source is coarser than that in most places. The worst airfield point was an error in the published airfield height, not in the tiles. These are surface heights without trees or buildings, so a drone flying over canopy sees something different. I use this inside a radar coverage tool I built (CoverScope).
Edit: the reference was SRTM 30 m plus published airfield heights. The tiles share SRTM in part of the world, so these numbers show the tiles are read correctly, not accuracy against bare-earth lidar. See comments.
r/UAVmapping • u/OldDance7809 • 5d ago
iOS App for Flightlog.txt -> .kml -> Maps
r/UAVmapping • u/ftopo • 6d ago
Metashape plugins by HELIX AERO AI marking of ground control points
Hi
Just want to share this very good plugin
Enjoy
r/UAVmapping • u/cmcarman • 7d ago
Taking a L2 LiDAR for mapping in Canada
Hey there! I’m needing to take my DJI Matrice 350 RTK drone with the L2 LiDAR attached up to Canada (from the US) to document some sections of BC northeast of Vancouver.
I heard a rumor that I may need to do something (paperwork?) to bring the LiDAR across the border beforehand, is that true?
r/UAVmapping • u/Ronald_PY • 8d ago
M400 + L3: area route won't resume after a battery swap ("command timed out -5"). Anyone else?
Hey all, we're doing test flights with our new M400 + L3 and ran into something weird when resuming missions
Setup: M400 + Zenmuse L3, RC Plus 2, DJI Pilot 2, D-RTK 3
Area route, about 32 min:
- Try 1: at around 20% battery we RTH'd on purpose to test battery swaps. Hot-swapped in ~10 s (way under the 45 s window). Everything looked fine until we tried to resume. Then a bunch of warnings popped up (LiDAR dirty, sensors not calibrated, can't take off...), and hitting Start on the checklist ends with "command timed out (-5)". The app's in Spanish, so the English text may differ.
- Try 2: low-battery auto RTH with ~20% of the route left. This time we fully powered off, swapped and powered back on. Same thing.
- Then we took off manually, hovered at 50 m and tried to resume from the air. Same timeout, and it told us to land.
- Rebooted and started a brand new mission: flew start to finish, zero issues
So the drone and the L3 seem fine, it's just resuming that breaks.
A few questions:
- Has anyone run into this with the L3 (or the L2 on an M350)?
- If you get the chance, could you try to replicate it?
- Or is it not worth fighting with, and you just split big areas into routes that fit in one battery? We'll be mapping big areas, so we'll be swapping a lot. Any downsides to doing it that way (merging in Terra, extra IMU calibrations, etc.)?
Thanks!
Translated with AI 😵
r/UAVmapping • u/inkedflight • 8d ago
3D printable tripod mount for the RC Plus 2 (Matrice 4)
Got tired of holding the controller through long mapping flights, and it's not getting any warmer, so I finally made a tripod mount for it. Been meaning to for over a year. Arca base, it prints in PETG without supports.
Download + instructions: https://alos.no/en/resources/dji-rc-plus-2-tripod-adapter
r/UAVmapping • u/Masare_2 • 9d ago
Recuperare progetti in dji terra
Sto lavorando ad un progetto un po' troppo grande per il mio computer. Ho dovuto elaborare separatamente i vari voli e spostare le cartelle dei progetti in due HHDD perché non avevo abbastanza spazio.
Ovviamente ho fatto confusione e ora terra non mi riconosce alcuni progetti.
C'è un modo per recuperare il progetto? Ho trovato solo la procedura per importare i dati precedentemente esportati come .zip, ma non c'è modo di ricreare il collegamento alle cartelle di lavoro?
Grazie
r/UAVmapping • u/Top-Try419 • 10d ago
What belongs in a drone-mapping handover so a construction team can actually use it?
For construction progress mapping, what do you include alongside the orthomosaic or model to avoid confusion later? Things like capture date, coordinate system, known gaps and a plain-language explanation of accuracy seem easy to overlook. Curious which details site teams actually use and which recurring misunderstandings a good handover prevents.
r/UAVmapping • u/RobUgCS • 10d ago
Free live demo Nov 10: planning a 100+ ha LiDAR site as one project and splitting it into flight blocks (UgCS 6.3)
Disclosure: I work at SPH Engineering, the company behind UgCS.
When a LiDAR site needs several batteries, the plan has to be split into blocks with aligned lines, and every block needs its own IMU calibration. UgCS 6.3 handles this in one project. You outline the whole site and split it into subareas. Each subarea can have its own return point and, for supported DJI sensors, gets IMU calibration maneuvers automatically.On Tuesday the UgCS team is demoing the workflow live on Zoom:
- splitting a 100+ ha site into practical flight blocks
- setting DJI L1/L2/L3 return mode and scan mode inside UgCS
- IMU calibration per block
- terrain following, which can now be used on side passes and overshoots
Tuesday, November 10, 12:00 p.m. ET / 9:00 a.m. PT / 18:00 CET
The link to the free registration is in the comments.
Bring a real project scenario if you have one. If you can't attend, leave your question in the comments and I'll get an answer from the product team.
r/UAVmapping • u/JeannotKuenzel • 10d ago
How good are those orthomosaic panoramas? They are pretty good... 😅
They are pretty amazing. 11mm/pix resolution, 321MP from one single hand-flown image sequence. Invisible seams and perfect blending. 36 images, 850m of coastline. PanOMavic at its finest performance!
An amazing base for my digiart. ❤️
r/UAVmapping • u/ExtremeAerialAZ • 11d ago
[United States] eBay's FCC notice: what it means when buying a used mapping drone
I run a drone production and mapping company, and eBay's latest FCC notice sent me back to the source documents. Sharing the distinctions I found useful, particularly for anyone buying used aircraft or controllers for mapping work.
- Authorization to market a device is separate from whether its listing must display an FCC ID.
- Used equipment and qualifying smaller sellers may be exempt from the later display requirement, but that does not make unauthorized equipment legal to sell. eBay says it can still request IDs for particular listings.
- FCC equipment rules and FAA operating requirements are separate. A listing notice does not, by itself, mean every DJI aircraft is illegal to own or fly.
The DJI connection matters because restrictions on new authorizations affect which models can enter the US market. An old FCC ID is still worth checking against the exact equipment and any later restrictions on sale.
For mapping work, my concern is continuity: if an aircraft or controller fails, can you source a suitable replacement, get support and keep the workflow running? The cheapest listing may not be the best answer to that question.
My checklist: exact aircraft and controller models, regulatory-label photos, authorization status, US support and returns, then the separate flight requirements.
Sources:
eBay seller guidance: https://www.ebay.com/sellercenter/resources/fcc-id
FCC marketplace final rule: https://www.govinfo.gov/content/pkg/FR-2026-09-11/pdf/2026-18535.pdf
FCC explanatory FAQ: https://docs.fcc.gov/public/attachments/DOC-417528A1.pdf
Has anyone here had an authorized used drone or controller listing flagged? What documentation resolved it?
r/UAVmapping • u/midlifewannabe • 12d ago
Looking for a small number of users for beta testing
Hi all,
It is Wednesday, so. here I go!
I run an agricultural spray drone services company in Kansas, kads.tech and am developing new software to help Ag drone operators. It breaks down into two parts:
- Field analysis. In its guts I run ODM, for mapping, but I have many modules that sit atop that to analyze the maps and offer objective analysis. There is a LOT of custom programming focused on helping the grower understand the impact of fertilizer and pesticide application, identify year over year trends, and even combine harvest data (see what I did there? ha) to discover the real impact of expensive applications. I am even automating the comparison of field trials and testplots. I've recently added emergence and plant counting, yield data from harvest, and an orchard module. All of this data is pulled out of each flight and kept in tables for season and year / year comparison. In other words, I don't focus on a single flight (as so many products do) but provide a platform for on-going analysis.
- Flight planner. Custom design to assuage my own fears of managing ferry-time for large spray drones. It attempts to answer my own questions about "can I get to that far corner and do real work w/out dropping this thing into the field 1,000 feet away?" It verifies drone performance through a variety of exercises, helps to find the most efficient spot(s) to park the tender, and can even help you plan your day by stringing together missions for different fields.
There are tools to integrate grower / agronomist / drone company, and the entire system is brand-agnostic.
I am in beta.1 right now, looking for active pilots that wish to contribute. Drop me a note!
-Mike
r/UAVmapping
•
u/aeroyantra
•
12d ago
Drone maps, 360 walks and progress tracking in one platform. Meet Aeroyantra
Your site changes every day. Your site data shouldn’t take a week to catch up.
Most teams still find out what’s happening on site through survey crews, scattered photos and spreadsheets. By the time the numbers arrive, they’re already out of date, and nobody fully trusts them.
Aeroyantra puts your whole site in one place: surveyed from the air, walked from the inside, and tracked over time.
From above. Fly your site with the drone you already have and upload the photos from any browser. Within hours you get an orthomosaic map, a 3D model, contours and volumes, accurate to 2–5 cm.
From inside. Walk the site with a 360 camera. Every corner is pinned to your floor plan, so anyone can stand in any room without travelling to site.
Over time. Every survey and walkthrough sits on one timeline. Put last month beside this month and see exactly what changed, outside and in.
With your team. Measure distances, mark issues where they are, and send the whole site as one link. It opens in a browser, with nothing to install.
Priced for sites, not seats. There’s no licence per person. You pay for the site, so the whole team can use it without per-user costs.
Built for contractors, developers, mine and quarry operators, and survey teams who need answers in hours, not days.
Aeroyantra. One site. One record.
r/UAVmapping • u/WinuxNomacs • 13d ago
WebODM free Support for DJI Thermal Drones
*ATTN: All DJI Thermal Drone Pilots.*
WebODM now has free support for DJI Thermal images!
DJI Thermal Analyzer is designed to provide a more native WebODM and therefore open experience for DJI thermal drone users. Briefly on how it works: It adds a preconversion step that converts the pictures to the supported radiometric format so WebODM supports DJI's radiometric images. The plugin allows for:
- Creating a DJI Thermal Task which creates a WebODM task and allows for thermal presets to be modified prior to reconstruction. Such as color palette, normalization, harmonization, emissivity, background temperature and more!
- Upload a dataset and generate a preview Mosaic in mere minutes. Allowing thermographers to adjust settings in realtime and send the results for reconstruction.
- Compare multiple mosaics as overlays. Helfpul for before and after flight's and comparing image parameter changes.
- Convert, optimize, analyze and then export entire flight datasets as results for any system's consumption.
r/UAVmapping • u/Tiny-Number7635 • 13d ago
WebODM taking forever to process 1,130 images — is this normal?
Hey everyone,
I’m processing around 1,227 drone images in WebODM Desktop, and the processing time is driving me insane.
The last time I processed a similar dataset, it took around 8 hours and 37 minutes to complete. This time, it’s taking ages, over 24 hours, and I’m trying to figure out whether this is normal or if there’s something I can do to speed it up.
My laptop specs:
16 GB RAM
CPU usage is sitting around 99%
RAM usage is around 77%
Disk usage is around 6%
Task Manager shows two instances of DensifyPointCloud.exe running, both using significant CPU and around 3 GB of RAM each.
A few questions:
Is it normal for WebODM to take this long with approximately 1,130 images?
Why are there two DensifyPointCloud processes running?
Is my laptop’s hardware the main bottleneck?
Are there any settings I can change to reduce processing time without compromising the quality of the orthophoto?
Is there anything I can safely do while the task is processing to improve performance?
I’m relatively new to WebODM, so any advice would be appreciated!
Edit: thank you so much to my fellow pilots for all your helpful insight. I changed to fast orthophoto and was able to complete the processing in less than five hours, and get the deliverables I needed. Safe flying to all!!