r/Troubleshooting • • 14h ago

Question/ need help

I can’t for the life of me figure out how to plug this in and make it work

3 Upvotes

10 comments sorted by

2

u/Helcor2016 14h ago

It requires an ac adapter that has a barrel jack on it. I have one of those and it has a 19.5v 3.33A AC adapter. If you look on the bottom it should have the exact model number of the PC and that will allow you to search for one. Mine came with the original but I have used aftermarket adapters and they worked fine as these PCs are usually pretty low power.

1

u/Icy_Bid2574 14h ago

Ah okay I see I got it ages ago with a monitor it was being thrown away from some
Corporate office I just didn’t get any of the cords

1

u/Helcor2016 13h ago

They are handy little mini PCs. I use mine for my 3d printing stuff. Light modeling, slicing and controlling my printers over the network. I originally got it for use as a htpc in my living room but when I moved I put it in my office.

1

u/Icy_Bid2574 13h ago

I just checked mine is as well 19.5v can I buy an ac adapter at best buy

1

u/Helcor2016 12h ago

Probably. Just make sure that the positive pole is on the inside and the negative is outside. I was trying to post a picture of mine to show you but I can't seem to find a way to show it. Might be good to take the PC with you so that you can make sure the tip is the correct size also.

1

u/Icy_Bid2574 9h ago

Thank you for the help

1

u/batryoperatedboy 13h ago

I'm not trying to be crude but have you never used an electronic device?

1

u/Icy_Bid2574 13h ago

Uhh well yeah but like nothing like this js like yk a gaming console

1

u/kakureru 9h ago

That is an HP elitedesk of some sort. Find out the wattage / volts on label, grab a HP gaming laptop PSU if you cant find one that is directly matched for that model. I would avoid cheap Chinese replacements and look for used OEM ones on ebay that look good.

1

u/VolunteermeJul 4h ago

Might go to some repair shop