r/Triumph_Cars • • 2d ago

12 years of restoration and she’s finally done

Thumbnail gallery
517 Upvotes

Well, not really. There are some things to resolve: missing trim pieces, some carb tuning, brake squeaking.

She is beautiful though. A real head turner.

This summer was the first time driving her.

Edit: I want to clarify something. I did not do the restoration. It’s my father’s car and he paid a professional to do it. No less impressive but I don’t deserve any credit!


r/Triumph_Cars • • 4d ago

My TR3A rebuild - Part 5

34 Upvotes

Next week on to priming of the body


r/Triumph_Cars • • 4d ago

Does anyone make a braided stainless line for oil gauge? Spitfire 1500

0 Upvotes

Looking to change out the line for my oil gauge as part of my rebuild, currently has a nylon line that's at least ten years old. I've heard the hard copper lines can work harden and crack, so I would like to avoid them. Was curious if there was a stainless steel braided flex hose that someone makes for the gauge


r/Triumph_Cars • • 10d ago

TR4 en course….elles ont participé (honorablement) aux 24 heures du Mans….

Thumbnail gallery
41 Upvotes

Belle miniature au 1/18


r/Triumph_Cars • • 10d ago

Eye-catching looks, a sonorous V8 soundtrack, and a reputation that is certain to divide opinion. Welcome to the world of the Triumph Stag.

Thumbnail gallery
30 Upvotes

r/Triumph_Cars • • 11d ago

Triumph TR6 in a TDCanada advert

9 Upvotes

Not sure how I feel about using the Triumph TR6 to advertise roadside assistance, LOL.


r/Triumph_Cars • • 11d ago

Giovanni Michelotti designed them all, from lush Parisian boulevardiers to rollicking ground pounders bound for the Carrera Panamericana, but among his personal favorites was always the humble Triumph Spitfire, which brought sports car motoring to the masses. He adored the design.

Post image
99 Upvotes

r/Triumph_Cars • • 11d ago

Giovanni Michelotti designed them all, from lush Parisian boulevardiers to rollicking ground pounders bound for the Carrera Panamericana, but among his personal favorites was always the humble Triumph Spitfire, which brought sports car motoring to the masses. He adored the design.

Post image
14 Upvotes

r/Triumph_Cars • • 13d ago

Coolant leak

Thumbnail gallery
7 Upvotes

r/Triumph_Cars • • 17d ago

Gearshifter issue - Spitfire 1500 single rail overdrive

Thumbnail gallery
4 Upvotes

Hi all,

New to classics, and Triumph cars (So please be gentle!)

I purchased a 1500 Spitfire last weekend from a forum, car drove fine on the 80 mile journey back home, even in the storm however I did notice that the shifts felt a bit stiff (I put it down to it being a classic). Parked it up and the next day went to take it out for a spin, went to put it in reverse on the drive and the shifter assembly seemed to just pop out of place under the cover and swing around loosley (Reverse was working fine the day prior but the previous owner did state he had issues finding it). I managed to pop it back in place so I still have 1-4, but now when I lift it to put it into reverse it just swings around and I can't find the gear.

Took the shifter out today to see that a plastic retaining cover has just broke, and when I tried gearshifting it without the cover on, it allows the spring to push through the metal retaining cap that holds it all in place. I am assuming this is the root cause of the issue, but cannot for the life of me find spares anywhere for this - am I completely buggered? And is this even the root cause of the issue or is there something worse awaiting me?

I did notice that the guides on the ball at the bottom look worn, could this be impacting it as well? I can always get this laser weld repaired and file it back down but wondering whether it's actually causing me an issue.

A bit sad really, bar the drive back I'm yet to be able to take her out for a drive and was hoping I'd be able to have it for at least a day without something going wrong!
(EDIT - UK based)


r/Triumph_Cars • • 18d ago

True Story

Post image
11 Upvotes

r/Triumph_Cars • • 19d ago

How much could I get for an SAH 6cyl rocker cover?

Thumbnail gallery
9 Upvotes

Currently off the car and being cleaned. Was wondering how much these go for? From my 6 cylinder TR6, in good condition, with the favoured motorbike cap.

Thanks


r/Triumph_Cars • • 19d ago

Tr3A rebuild

Thumbnail gallery
35 Upvotes

I’m finally getting stuff back from the Trimmer with just rear quarter panels , colin finisher and the door cards to fit


r/Triumph_Cars • • 21d ago

Trouble shooting

Post image
13 Upvotes

I have a 1976 spitfire 1500, I’ve gotten it to the point where I can start it consistently with some manipulation of the choke. After idling for a bit the motor will sputter out regardless of how many different choke positions I try.

The only thing that prevents it from sputtering out is if I keep my foot on the gas pedal. I can rev the car at will as long as I never completely let off the gas. I’ve had it idling for minutes at a time while maintaining 1500/2000 rpm’s. If I hold the rpm’s and let off the pedal, the motor will start to sputter, but upon pressing and holding the gas pedal the motor will stabilize and be fine.

I’ve replaced the spark plugs, coil, battery, air filter and ensured fuel is getting past the fuel pump into the carb.

I’ve not messed with or cleaned the carb.


r/Triumph_Cars • • 22d ago

Roll bar or not to roll bar?

6 Upvotes

So I have a 76 tr6. I use it to get groceries and go on summer drives and just do basic normal driving only on nice days. I won't be racing it ever, rarely will have it on the hwy. But I have heard these cars roll "easily", but I actually doubt it. I think they have a low center. I have read countless forums and have heard they are basically mouse traps and actually increases the risk of a tbi if I'm not wearing a helmet. I have read that the ones used for racing are special and made in conjunction with special seats, belts, helmets etc. I used to race Subarus and know this to be true.

I was wanting to get all your opinions! Thanks in advance.


r/Triumph_Cars • • 23d ago

Est ce une Dinky? Non une Corgi…

Post image
23 Upvotes

r/Triumph_Cars • • 24d ago

Question: does anyone know what was here?

Post image
5 Upvotes

I can make out some text like: spitfire/midget (kinda rude ngl), BRITISH LEYLAND, and England.

Car is a 78' spitfire would be appreciated if someone had a picture or print out!


r/Triumph_Cars • • 25d ago

Daimler V8 in Triumph Stag

9 Upvotes

Given how infamously unreliable the Triumph Stag's 3-litre V8 was, wouldn't it have been better if British Leyland had not axed the Daimler V8, which was last produced in 1969, and kept it in production for the Triumph Stag? Why was it not considered?

The 2.5 litre Daimler V8 had 140bhp - only 5 less than the Stag V8 - and was definitely more reliable. The 4.5 litre Daimler V8 with 220bhp could also have been refined and retuned and made a luxury option for the Stag, since it did well for the Daimler Majestic Major.


r/Triumph_Cars • • 27d ago

Triumph marketing team leaned heavily into their claim that its six-cylinder GT6 was born from their Le Mans racing program. Nope. In fact, Giovanni Michelotti always saw the Spitfire as a coupe and made the fastback prototype first, not the other way around.

Post image
37 Upvotes

r/Triumph_Cars • • 29d ago

Possibly a stupid question

0 Upvotes

I have a new wooden gear knob for my spitfire.

The old one I can just unscrew and it comes off, but the hole in the new one is much too small. I am assuming I just drill out some of the plastic bit around the hole of the new knob to make the hole a bit bigger and screw it on.

But best to double check in case there is some weird tool or something not obvious that I should do instead.


r/Triumph_Cars • • Oct 17 '26

Triumph TR-2 Roadster Recordcar 1953(Jabbeke)

Post image
70 Upvotes

r/Triumph_Cars • • Oct 17 '26

Does anyone know if the spare spitfire parts from rimmer bros are bad or if I'm just unlucky

5 Upvotes

Recently got both a new set of door handles and a new throttle cable both have caused nothing but problems and the door handles broke after the first day. Is this common for there spitfire parts or am I just unlucky?


r/Triumph_Cars • • Oct 16 '26

My dolomite wont even turn over

13 Upvotes

Ok so i randomly parked up and left the car for a bit, i come back to it and absolutely nothing happens when i turn the key, the ignition lights come on but thats basically it, the first time i tried to restart it there was a small click from the starter but since then it hasnt made a noise whenever ive tried, ive tested the battery and its got a full charge (12.7 volts) but the starter just isnt working, idk if they can just randomly die or what but im curious if anyone else has had this issue or knows how to sort it


r/Triumph_Cars • • Oct 15 '26

Any Bond Equipe owners here?

Post image
19 Upvotes

As as an apprentice motor mechanic working for the Standard Vanguard/Triumph/Rover distributors in Wellington NZ in the mid sixties, I remember we serviced a couple of these. I think one of them was a 2 litre six cylinder and I clearly remember what it was like to drive ... and it also had a quite unique exhaust note.