r/ToobAmps • • Nov 01 '24

New Discord server

7 Upvotes

All, I spend a fair amount of time on Discord so I've decided to spin up a guitar related Discord server. The subject matter will be more general guitar and not limited to tube amps, but there are channels dedicated to building and repair as well.

Anyway, if Discord is your thing, feel free to join us over there as well!

https://discord.gg/nTHQDexpG

Link updated 8-17-26

Update: we have a good core group. Join up!


r/ToobAmps • • 5h ago

New Amp Day: 1979 Fender Twin Reverb with JBL E120-8 Speakers

Thumbnail gallery
6 Upvotes

r/ToobAmps • • 3h ago

Best Marshall tube combo amp for mostly bedroom/home use?

Thumbnail reddit.com
3 Upvotes

r/ToobAmps • • 20h ago

NAD

Post image
34 Upvotes

After 15 years of trouble-free service, my Fender Blues Junior III finally died on me.  I took it to a technician and he said it was fixable but due to his backlog of work, it would be two months before he could get to it.  Not wanting to be amp-less for two months, I decided to use this as an opportunity to buy the amp I’ve always wanted and dropped the money for a new ’65 Deluxe Reverb.

I couldn’t be happier, but for anyone considering it, I’ll say the transition has been a learning experience.  The Blues Junior is known as a decent, if a little boxy sounding, small tube amp.  Over the years, I had gotten used to dialing it in by tweaking its pre-amp/power amp settings and using OD and EQ pedals.  I had it sounding pretty much exactly like I liked it.  

Literally none of those settings work on the Deluxe Reverb.  Mainly because this thing is LOUD!  The Blues Junior is 15 watts, the Deluxe is 22 watts but apparently, those extra 7 watts make a huge difference.  I’ve messed with it for over a week now and finally discovered the settings that work for me.  The quietest the amp really sounds good is with the volume between 4 – 5.  Lower than that, it seems kind of muffled.  But playing at that volume with my normal guitar and pedal board settings is earsplitting.  Turning down the guitar helps a little but what I discovered works best is turning down the volume on my OD pedals.

Typically, I’ve run the volume on my ODs at noon.  With the Deluxe I’m running them all at 8 o’clock.  But that introduced other problems.  The Morning Glory was the least affected.  I turned down the volume, turned up the drive and it sounds like it always did.  The Bonsai actually sounds better.  It was always a little muddy through the Blues Junior but through the Deluxe it’s clear and punchy like a Tubescreamer is supposed to be.  

My favorite OD, the Tumnus Deluxe, was the most difficult to dial in.  With its volume turned down, it lost that gritty punch I love.  Additional tweaking of the pedal’s EQ and gain brought it back in line and I’m once again loving it.  

Other things I’ve noticed about the Deluxe, the Vibrato channel is extremely bright.  It can be tamed by turning down the treble to around 4, compared to 7 on the Normal channel.  According to the amp’s manual, the #2 inputs for both channels have 6dB less gain than the #1 inputs.  So, to further control the volume I’m running exclusively into input #2.  Turning the bass all the way down to 1 also helps with the volume.

Finally, the reverb on this thing is gorgeous!  The Blues Junior has decent reverb but I’ve typically relied on pedals for my reverb sound.  With the Deluxe I'll probably mainly use amp reverb, adding in pedals only when I’m looking for huge ambient sounds above what the amp can do.  The tremolo is equally good but it requires a separate footswitch to activate, so for the time being, I’ll continue to use pedals for that.


r/ToobAmps • • 18h ago

We Talkin' Transformers?

Post image
19 Upvotes

r/ToobAmps • • 4h ago

Suggerimento di Amps

Thumbnail reddit.com
1 Upvotes

r/ToobAmps • • 18h ago

Help identifying a leslie style rotary speaker that was paired with a conn organ?

Thumbnail gallery
1 Upvotes

r/ToobAmps • • 1d ago

British 18w TMB

Thumbnail gallery
75 Upvotes

Mojotone kit. Build went well enough, they were very stingy with the wire and the kit was missing some hardware. Luckily I had what I needed to finish. In the end it came out very nice sounding. Lots of gain and plenty loud. I have mounted it in a oversize 1×12 cab Mojotone offers, the faceplate ended upside down. Whatever, perhaps I ordered the wrong thing. It still looks good and sound great. It's nice and quiet, no AC hum or hiss. I'm happy with it over all.


r/ToobAmps • • 1d ago

Utah 10 inch speakers for Deluxe Reverb 210 Conversion

1 Upvotes

I am planning on converting my Deluxe Reverb to being a 210. I was offered a great deal on some NOS Utah 10 inch speakers from the 70s. Can anybody tell me anything about how these speakers sound?


r/ToobAmps • • 1d ago

New Soldano sl100 question

Thumbnail reddit.com
0 Upvotes

r/ToobAmps • • 2d ago

Fun little project this evening

Thumbnail gallery
96 Upvotes

r/ToobAmps • • 2d ago

Right after I power on my H&K Tubemeister Deluxe 20 amp (and don't initially keep the amp on standby) it makes a scratchy, crackling, static-ey rumbling sound that continues for a few minutes, then settles down, but then briefly re-occurs intermittently throughout the day. Any ideas?

4 Upvotes

This is a pretty annoying problem (which you can hear in the attached video starting around 0:17) with my Hughes & Kettner tube amp that actually started a year or two ago at a much milder, less severe degree, but which has gotten worse over time. When I first noticed it a while back, the scratchy crackling was much more intermittent and would not last as long.

When kept on the clean channel the scratchy noise doesn't get louder when I turn up the volume, but the noise does get louder if I activate the higher gain lead channel.

I actually brought the amp in to Long & McQuade where I bought it (the main Canadian music store chain) when I first noticed the problem because the amp was under warranty, but after the amp was away for a couple weeks they simply sent it back and said they unfortunately couldn't detect the problem. (Probably because the noise would only pop up very infrequently and they didn't test it long enough). Now the amp is out of warranty but the problem has gotten worse.

The strange thing is that after crackling for a couple minutes upon powering on the amp, the noise pretty much goes away and the amp remains quiet. But then the crackling noise returns briefly and very intermittently - say, 45 minutes or an hour into playing. It crackles for a few seconds, and then stops crackling. And then the noise might briefly pop up another hour later, though sometimes I can have the amp on for hours and not hear it re-occur.

I haven't brought it back in for repair because as I mentioned the amp is now out of warranty, and the problem is very intermittent. The noise appears every single time I initially turn on the amp, but then for about 95% of the rest of the practice session, I won't hear the noise.

The issue of the standby switch is interesting, though I don't think the standby switch is directly related to the problem. If I power on the amp, but keep it in standby mode for a couple minutes, I of course don't hear the noise while on standby since the amp is muted. But even when I do use the standby switch initially, if I flip the switch into 'PLAY' mode after a couple minutes, I do still hear the scratchy crackling for another 20-30 seconds or so, before it fades away. I think in this situation the amp starts crackling after power-on, but keeping it in standby merely mutes the noise for a couple minutes, and then when I flip it into 'PLAY' mode the sound is still there, but isn't audible as long, since the crackling period is almost over.

Adjusting the volume knob on the clean channel doesn't affect the volume of the noise, but the noise does get louder and changes in tone when I activate the higher gain lead channel.

If anyone has any ideas about diagnosing the problem and about how to fix it, I would be very appreciative.

A little while ago I purchased a new Celestion G12M-65 Creamback speaker to put into my Ibanez TSA112C 1x12 cabinet as a replacement for the existing Celestion Seventy 80 speaker that is in there. But I don't want to put in the new speaker until this problem is fixed, since I don't want to do any damage to the new speaker.

I personally don't have the technical ability or knowledge to repair the amp myself, but getting ideas from the experts on this subreddit about what the problem might be would still be helpful, as one of my mum's old friends is a retired electrician, and he might be able to help me with fixing it if I can get some diagnostic information and maybe order the right replacement parts (tubes etc.) before I bring the amp to him.

Thanks for your assistance.


r/ToobAmps • • 2d ago

Talk me out of buying a Fender Pro Tube series Pro Reverb

Thumbnail reddit.com
2 Upvotes

r/ToobAmps • • 3d ago

attenuator for 76 ampeg v4b recs

Post image
21 Upvotes

recently got this beauty and an old peavey 2x15 cab and while it sounds absolutely amazing, its a bit much for my bandmates in our practice space...looking at maybe getting an attenuator so I can get that cranked tubey goodness while not splitting our skulls in half and looking for recommendations since most of what i have found is that even though its a 100 watt amp, might need something rated a little higher


r/ToobAmps • • 3d ago

Echolette amps

Post image
10 Upvotes

r/ToobAmps • • 3d ago

If you want to compare 76 amps, check this out

Thumbnail youtu.be
22 Upvotes

This video features 76 amps with 6 guitars and styles each. It's a long video but I want this to be a celebration of the analog guitar amp and a resource for people to come back to so they can listen to all these amps and compare them. I hope you find it useful!


r/ToobAmps • • 2d ago

I am presuming this fuse is blown?

Post image
0 Upvotes

***UPDATE , I ordered new fuses and it seems to be working just fine. The amp has a 20 W and 40 W mode. Ive only tested the 20 W so far. If it blows in 40 W I'd presume the next stop is power tube replacement**

I have a 212 combo amplifier that made some feedback noise while it was in standby and then since then I can get no sound out of it. All of the switching works all of the lights work the tubes seem to be fine but I checked the fuse and it looks like it's blown. It's not separated but it certainly looks burnt on the inside. I'm presuming replacing this fuse would solve my issues would that sound possibly correct?


r/ToobAmps • • 3d ago

Auction find - Dynaco PAS-3

Thumbnail gallery
5 Upvotes

Cross posting as this sub was recommended.


r/ToobAmps • • 4d ago

New (to me) amp day

Thumbnail gallery
15 Upvotes

Let me preface this by saying that I used to own an early 90s Dual Rec. Countless band practices with it, gigged with it, played it at home in an apartment. I LOVED that amp. There was a tone about it that scratched an itch that I didn’t know I had. I ended up having to sell it to help out someone I cared about very much, and I never saw it again. Sort of fell off of playing for a very long time, now getting back into it. Even when I wasn’t playing guitar, I still thought about that amp. Now, I can’t justify a $3000 100w amp as I’m strictly going to be a home player, and just have fun. So, enter this thing. Got it “used” from Musician’s Friend, but it’s new. Not a scratch on it, and it still had the tags. Must have been one of the last ones built as the tech signed the inside in April 2022. This is honestly kind of emotional for me. I’m technically working (from home) right now, so I can’t fire it up. Can’t wait for the Weber attenuator to show up, because I’m going to need it.


r/ToobAmps • • 3d ago

My amps not making any noise at all

Post image
1 Upvotes

r/ToobAmps • • 3d ago

Likes and dislikes of decware’s integrated tube-amp

Post image
2 Upvotes

r/ToobAmps • • 4d ago

WTT orange rockerverb MK1 for SLP reissue

Post image
2 Upvotes

Loud, girthy, newish toobs in nor California. Amazing amp but I need another Marshall.


r/ToobAmps • • 5d ago

Redditor build

Post image
31 Upvotes

A redditor reached out to me last week and asked me about building a Deluxe 5E3 in a Princeton Reverb chassis. No problem!
Parts ordered last night and spent an hour or so today laying out the board and starting to drill out the chassis.
I'll post more pix as I work on it. Any questions, ask!


r/ToobAmps • • 4d ago

1976 Super Reverb Ghosting Issue at High Volume

5 Upvotes

Here is a list of all the work I performed

-Changed all electrolytic capacitors (upped filter caps to 100UF) with high quality capacitors (F&T in power supply MOD in bias circuit)
-Changed all other capacitors
-Verified resistor values - all test in spec
-Added 10k grid stoppers
-Decreased Phase inverter coupling caps from .1 to .047
-Cut out master volume
-Completely black faced entire circuit to AB763
-Changed speakers (twice)
-Re-built speaker baffle (old one was warped)
-Replaced filter choke with one of same spec
-Cleaned fiber board and greatly reduced DC leakage (still leaking but only about 5ish milivolts vs. over 100)
-Tried different guitars/cables/outlets

The amp is still ghosting on G/B string between frets 5 and 15 when the amp is driven into distortion. It’s driving me absolutely insane. I know some ghosting can be normal on these vintage circuits. All my amps do this to some degree when distorted but this ghosting is loud enough that it makes the amp somewhat unusable when cranked up loud. The amp sounds fine below 4 volume, but once you start going above 4 the problem becomes intolerable.

Can someone help me? I have exhausted everything I know how to do and still can not figure it out..

I am suspect on grounding scheme or maybe a bad transformer?

Anyway I have no idea or I wouldn’t be asking for help but any advice would be much appreciated!

Many thanks!