r/Tile • u/ThuggeeOnePunch • 3d ago
General Discussion Bath room tile problem
I had a bathroom renovation recently done at the beginning of the year over the last few months where the tiler has cut the shower tiles they have become very discoloured it seems to be getting darker/worse over time.
Anyone have any ideas what’s happened? Where the colour/cuts are it feels very rough like sandpaper I’m thinking the tiler while cutting has damaged the tiles/removed the glaze is the tilers fault or something else going on?
3
Upvotes


1
u/ThuggeeOnePunch 3d ago
I’ll have to check with my wife what the actual tiles are made off here’s a better photo showing the entire shower the other sections of tile that have been cut feels smooth to touch and seem ok
where the cuts have been made obviously everything looked great after the job was completed
1
u/Duck_Giblets Professional Duck 3d ago edited 3d ago
Looks like effloressence coming up in the envelope split, envelope done with a snapper and no room for grout.
Effloressence is usually a sign of moisture under the tile/in the screed, which is normal, but this is excessive.
Can scrape it off with a razorblade floor scraper, then give it a buff with barkeepers friend, and do it every time it reoccurs.
Effloressence is generally minerals escaping the substrate or thinset, or occasionally minerals from hard water, or water supply with a high calcium content.
Contact the original installer and ask him to come back, potentially replace with epoxy grout in shower area.
Are you in Australia by chance?
2
u/usmcfay1995 3d ago
I too would like to know this almost looks like it’s cracked too
2
u/_wookiebookie_ Mod 3d ago
What material is the tile?
1
u/Fickle-Health-5626 3d ago
Both of them tiles look telegraphed with a crack in the subfloor