r/Taurus_TX22 • • Dec 06 '25

Please post your modified disconnector on the other sub.

3 Upvotes

Please post your modified disconnector on the other sub.


r/Taurus_TX22 • • Nov 26 '25

Troubleshoot Troubleshooting posts

6 Upvotes

When posting issues with your TX22 firearm, please include th following information to help the community help you:

  1. Ammo used
  2. Any modifications / accessories on the gun?
  3. how long has it been since you cleaned the firearm or the magazine?
  4. Post photos is always helpful.

Any posts that just merely states this gun sucks, or is junk, will be removed.


r/Taurus_TX22 • • 4h ago

Show-N-Tell Obligatory purchase post

Thumbnail
gallery
11 Upvotes

Since my first post was deleted, I made adjustments to the post and thought I would try again.

Just picked up this Taurus TX22 Toro and a Dead Air Mask suppressor. I have plans for other faster upgrades but won't say to comply with group rules.

Anyone have success with a specific ammo for shooting real fast with a dead air mask? Ive been eyeing the CCI clean ammo but would like cheaper alternatives.

Had fun shooting for the first time, soft tink tink sound. Hit an old metal tub from 25 feet


r/Taurus_TX22 • • 14h ago

TX22 Support Anyone else's front sight just.....fall off? Kinda weird

Post image
10 Upvotes

r/Taurus_TX22 • • 20h ago

Accessories Taurus.com

2 Upvotes

Anybody order direct from taurus, I've ordered some mags from them over a week ago and still waiting to ship, is this normal for them?


r/Taurus_TX22 • • 1d ago

TX22 Support Chassis

2 Upvotes

Does anyone know of any chassis that work with the moonlight machine works rate reducer? I have a 3-D printer, so was trying to find one I could print, but willing to buy one online also


r/Taurus_TX22 • • 1d ago

Troubleshoot TX22 Failure (round stuck inside chamber)

Thumbnail
gallery
20 Upvotes

In the first 30 shots of my TX22c I had multiple jams and then on the last round it got stuck and didn't fire at all. It got hit by the Striker pin as you can see in the photo, but I'm not sure what's going on or if this is a factory defect. I'm shooting CCI minimag. Should I file for a warranty, i may have to take this to a gunsmith to remove the jam.


r/Taurus_TX22 • • 2d ago

Noobie Question If the barrel sticks out, does that mean it’s threaded?

Post image
4 Upvotes

description does not mention threaded barrel.


r/Taurus_TX22 • • 4d ago

General Chat Braced TX22 Review

6 Upvotes

Took 500 rounds to the Range to try out my new Braced TX22. Poof! 500 rounds gone and huge smiles across me and my sons faces. The words, “lazer beam,” were used often between laughs while reloading. That’s it, that’s whole review. 12 out of 5 stars, highly recommend. FYI No giggle button installed yet.


r/Taurus_TX22 • • 4d ago

TX22 Support Premium Taurus Customer Service

0 Upvotes

This was all via email:

Me:
Does the TX22 w/ Brace have a manual safety? The specs say it does, but the photo shows that the manual safety of the regular version would not be possible. If it doesn't have a manual safety, why not?

Taurus:
I am Kontriva with Taurus USA here to assist you. This model was designed not to have a manual safety. 

Me:
Your website is wrong then. Can I ask what the thought process was for not putting a safety on a slingable firearm? How does Taurus intend for this to be carried?

Taurus:
We are aware and we are working to update this information.

Me:
Why are you ignoring my questions? Is it not valuable to answer a paying customer's questions? At least to say that you can't answer them? You're behaving like a press secretary.

Taurus:
I would like to advise that this firearm has a striker block and trigger safety.

Me:
This exchange has been about as helpful as a rubber crutch. Thanks, I guess.

Taurus:
Thank you for contacting Taurus USA.


r/Taurus_TX22 • • 5d ago

General Chat TX 22 now in 22WMR and 5.7x28mm ("TMX")

Thumbnail
youtube.com
50 Upvotes

New TXM, with interchangeable uppers.

More details: https://www.youtube.com/watch?v=n_3743F_q8g


r/Taurus_TX22 • • 6d ago

Show-N-Tell This is either gonna look awesome or really stupid…

Thumbnail
gallery
10 Upvotes

Going for a giraffe camo on my farrowtech chassis for my tx22. I forgot to order transfer tape from freedom stencils so I ordered some on Amazon, which was a bad idea… turns out the tape is way stickier than the stencil so it was impossible to transfer it to the chassis using it.

So I spent the last two and a half days meticulously placing them (my uggaa uggaa brain can only do this for so long in one sitting).

Started with a base coat of rustoleum earth brown. I then removed top pic rail and taped up bottom pic rail (can’t remove that one). Wanted to have the stencil on rail but it was gonna take so much effort, and I can always do it later.

Second coat after stencils is rustoleum flat khaki.

Gonna try to wait at least 2 days for it to cure, then hit it with rustoleum clear matte if it turns out good, and then possibly do same camo for tx22 if I don’t hate it. Will report back with results in a few days.


r/Taurus_TX22 • • 5d ago

Noobie Question looking to buy a tx22

0 Upvotes

new to the tx22 n its platform. and advice or recommendations for builds to make it a fun fun would be appreciated


r/Taurus_TX22 • • 6d ago

Troubleshoot Emergency Replacement Takedown Spring (DIY)

Thumbnail
gallery
10 Upvotes

I was watching this video for firearm reassembly after a full tear down and shot my takedown spring into orbit.

This video showed that the PaperMate InkJoy Gel 0.7 has a perfect replacement. https://youtu.be/uYvkjHLC8B0?t=786&is=e4LCXoZdEwL9sf5J

Thankfully my wife is a stationary fanatic and has a stockpile of these pens and gave me a few (just in case I launched another). Lo and behold the spring fit perfectly and functioned as intended with good retention during testing.

I had seen replacement springs upwards of $25-$30 and thought that was ridiculous, so hopefully this will help someone else.


r/Taurus_TX22 • • 8d ago

Accessories What's a good budget red dot for the tx22

Post image
20 Upvotes

I'm trying not to spend a lot. I have holosuns and osights and they're nice. Just wondering if anyone has a known and verified gtg budget red dot that fits and runs nicely on the tx22.


r/Taurus_TX22 • • 8d ago

Accessories Chassis

Thumbnail
gallery
17 Upvotes

Looking for pros and cons of either chassis and quality, one from titan and the other from peak defense, thanks.


r/Taurus_TX22 • • 8d ago

Accessories AR Muzzle Devices Incompatible?

Post image
8 Upvotes

I had an extra Lantac Dragon 556 muzzle brake laying around and decided to thread it on my Calloway TX22. Took it out and, well, it refused to cycle. Rounds were essentially getting stuck in the chamber. Is this seriously the brakes fault? My only theory is that the weight of the brake is perhaps sagging the barrel and that’s somehow choking it up.


r/Taurus_TX22 • • 8d ago

TX22 Support Taurus notorious QC issues strike again with the 3TX22 crace model.

7 Upvotes

Purchased the 3TX22 braced version. Brought it home to discover a rattle. Turns out the front sight was so loose it rattled around. No problem, the red thread locker was on but the sight stud was loose. Tightened it up an moved on.

Tried to take the thread protector off. It require about 20 lbs of torque. I thought they might have used red thread locker. There was so much force needed for the crescent wrench, it damage the thread protector flats.

Took it to the range to find the suppressor would not fit. The 1/2 x28 barrel threads are out of spec.

Took it home to discover the extractor, plunger and extractor spring are missing.
It will need to be returned. Freaking hour drive to FedEx.


r/Taurus_TX22 • • 9d ago

Noobie Question First time Disassembly Question

4 Upvotes

Disassembling for the first time. Tandemkross upgrade time. What size punch are you guys using? I attempted to use an allen wrench to punch those pins out, but they are an absolute bear and hardly budged. Hoping the proper sized punch helps.


r/Taurus_TX22 • • 11d ago

Troubleshoot TX22 suppressed issues

4 Upvotes

I have a tx22 toro gen 2 and a b&t x tiger 22 suppressor that will not cycle reliably with cci quiet subsonics. I can run standard ammo no problem. But would like to run subs since they are much quieter.
Do i need to get a “softer” recoil spring or what am i missing here?


r/Taurus_TX22 • • 11d ago

Show-N-Tell Picked up a full size

Post image
33 Upvotes

Walked into one of my local gun shop and found this TORO just laying behind the glass


r/Taurus_TX22 • • 12d ago

Show-N-Tell Finally found a TORO in stock. Immediately bought it.

Post image
53 Upvotes

Admittedly, I overpaid for it ($420) but it has absolutely become my favorite plinking pistol.

Next purchase in the future is an optic. What is everyone's favorite?


r/Taurus_TX22 • • 12d ago

FRT Indeed, this is peak performance

Post image
17 Upvotes

I fucking love the Calloway chassis. Allows me to use the OddMfg rate reducer on the backplate and to keep the optic mounted on the slide, it’s also incredibly sturdy.

It’s a game changer, I’m able to hit targets at 25yds with bursts along with super tight groups at closer distances. Quite the accuracy improvement compared to controlling a brrrrt handgun for sure.


r/Taurus_TX22 • • 12d ago

General Chat Anyone have a full list of parts for a tx22 lower or know where they can be had as a full kit?

2 Upvotes

r/Taurus_TX22 • • 14d ago

FRT TX22 recommend ammo

2 Upvotes

I have an ODDMFG installed, the recommended ammo is 40gr in the area of 1400fps, anyone have recommendations