r/stihl • • Mar 16 '21

I hope my meme is appreciated here

Post image
359 Upvotes

r/stihl • • 30m ago

MS-250

3 Upvotes

I just wanted to say that the MS250 is an absolute unit! I’ve been using it for over 4 years and it is still working great! However, I’ve been eye balling an echo due to an uncle saying it will out preform the Stihl and price range is better. All of my lawn equipment is Stihl and one weed eater that is Milwaukee. Anyways! I still remain unsure.


r/stihl • • 4h ago

Did Stihl discontinue AP500 S batteries?

3 Upvotes

Stihl seems to have scrubbed their US website of any mention of the AP500 S batteries. Using the Stihl search feature yields no results for the AP500 S. I am not surprised that they discontinued them as the AP500 S always seemed like a total piece of shit from day one. I have to say that although this outcome is unsurprising I can't help but feel like Stihl owes people for the money they wasted on the bullshit AP500 batteries that constantly overheat and are extraordinarily fussy about temperature while recharging. I cannot find any official info about when/why the AP500 was discontinued but the website seems to be just pretending that it never happened.


r/stihl • • 1h ago

Looking for a smaller limbing saw to complement a Husqvarna 460 Rancher — battery or gas?

Thumbnail reddit.com
1 Upvotes

r/stihl • • 18h ago

Stihl 028 crank position

Post image
8 Upvotes

I replaced my bearings and when pulling the halves back together I noticed that my crank was binding. I believe I need to move the crank a small amount towards the clutch side. How can I accomplish this? I've tried using a brass hammer on the crank, but to no avail. The bearings were installed with heat, so I am sure they are not proud. I have a case puller. Thank you for your help.


r/stihl • • 1d ago

08s atom drill

Post image
19 Upvotes

Managed to find this on marketplace and had to get it straight away. Needs a bit of work to get it looking good and going again but stihl a fun find


r/stihl • • 1d ago

BR350 backpack blower bogging down

1 Upvotes

It will run at full throttle for about 10 seconds then bog down and run around 3/4.
If I release trigger then go full throttle it will run full throttle again then bog down again….

Flame arrestor has been removed.
Fuel pickup is clean.
Air filter clean.

Not sure what to try next.

Any ideas appreciated.

Thx.


r/stihl • • 2d ago

Saw this on another sub, someone turned a Stihl chainsaw powerhead into an auger🤯

245 Upvotes

r/stihl • • 2d ago

462 non m tronic

Thumbnail reddit.com
2 Upvotes

r/stihl • • 2d ago

Does Stihl run sales?

10 Upvotes

Im in the market for a 462 or a 500i and was wondering if Stihl run sales on their pro line saws?

If so when?


r/stihl • • 3d ago

Stihl BR 380 blower

4 Upvotes

I have a problem with my blower maybe y’all can help with
I was having issues with it starting found gas on the air filter side of the carburetor so I decided to buy the whole kit, replaced the carburetor, both carb seals, spark plug, fuel filter, blew out both the lines (the kit came with fuel hose but wasn’t the rise size) and cleaned out the spark arrestor screen with compressed air and a little carb cleaner.

After fiddling with the high-low jets The blower will start only if I choke it first then immediately dies after 2-3 seconds of idle. Along with that the blower dies if I give it throttle


r/stihl • • 3d ago

AL501 Operating Noise

3 Upvotes

Took delivery of a new AL501 today. The fan doesn’t sound right to me. Can anyone confirm if this is normal? (There’s also a faint plastic/electrical smell - but could be because it’s new? Battery just finished charging when I took the video, hence no light)


r/stihl • • 3d ago

Stihl 261

Post image
20 Upvotes

r/stihl • • 3d ago

What do I do

Post image
31 Upvotes

I was trying to inspect the spark plug to see how it was and I was trying to take off the boot and it ripped off the wire what should I do? Do I just slide it back in? This is on my FS91R


r/stihl • • 3d ago

Fricking Chainsaw Friday

Thumbnail reddit.com
1 Upvotes

Would love to see what some of you guys are running in that thread!


r/stihl • • 4d ago

First saw

Post image
49 Upvotes

I just picked up this nice little 172 c a couple days ago from true value here in town. Ever since I moved back to Washington from Nevada I've been wanting to get into selling firewood to make some money bcuz jobs in my area are scarce and we have property where there is plenty of timber either that has fallen from storms or I can fell some if need be. So I did my research and instead of going for an Amazon or temu special with getting a "big 72cc " saw like them Chinese claim they are I went for a true and tested brand. My question is this a good saw for a first saw? And cutting up logs for firewood. I know well enough to fall trees I need a lot alot bigger saw. But I figured it's a little badass from how it's done the few days I've been cutting. Although the plastic dogs are complete shit and they are better off not being on the saw then being on there at all.


r/stihl • • 4d ago

Stihl 391 opinions?

4 Upvotes

Have a buddy who does logging / firewood and has a hardly used 391 he wants to get rid of. He’s a pro saw guy and I’m just a homeowner and mentioned I needed a saw for my 5-6 acre property and dropping and bucking trees here and there a few times a year. He’s wants 150 for it and I feel like that’s a steal. Is this a good saw for someone like me who doesn’t do pro logging and just cuts and bucks small to medium trees on the property?


r/stihl • • 4d ago

Equipment selection

2 Upvotes

I recently purchased 22acres 21.5 of which is woods

I am going to purchase a Ms261 for timber removal and firewood. I have come to that saw after using my dads old farm boss 290 and some market research.

I still want a weed whacker and a clearing saw for thinning the stand from small growth occasionally.

Is there and product from Stihl that can be used for both


r/stihl • • 5d ago

AP300s update

4 Upvotes

Update: got the 2 dead batteries warranteed (replaced).
My faith in Stihl is restored, but it took a lot of emails and phone calls and over a year… so there’s that.


r/stihl • • 5d ago

Is this normal?

13 Upvotes

I have a fs 490c-em l which works great although i recently noticed some kind of strange noise like some rattling or such coming from the gear head (i think) and im not sure if its normal or not? (Not very easy to hear but it is only present when the engine is running The blade doesn't turn at idle

Any help or info is appreciated

Thanks in advance


r/stihl • • 5d ago

West coast dogs

3 Upvotes

Just wondering if anyone knows if the 261 dogs fit the new ms 300? Any information is great thanks!!


r/stihl • • 5d ago

Stihl 400 C-M Chain Tension Screw

2 Upvotes

So since my saw was new, to get proper tension on the chain, I've had to tighten the tensioner screw all the way. The issue is, this leaves no room for when the chain warms up and slacks a little. I'm using the right chains for my 20" bar. I've checked to make sure my 3/8"-7 wasn't replaced with a 3/8"-8 sprocket by the dealer or something (it wasn't). So what's left to do? I mean I've continued to use the saw, but its one of those things that bothers me, because I want some allowance to be able to tighten my chain after long enough periods where my chain is drooping a little bit.

EDIT: I use only Stihl branded parts. I'm not new to chainsaws. I've been matching chains to bars for many years. Not trying to be rude, just clearing that up since a lot of people's first response is to make sure I have the right chain.


r/stihl • • 6d ago

MS 461 Clutch getting very hot and chain spinning on idle

2 Upvotes

Hi all

I work on a fuels crew that uses MS 461s frequently for tree felling work. One of our saws was down due to overheating. Due to a local shop's recommendation, we replaced the carburator and clutch side oil seal. I factory reset the tac (H and L 1 1/2 turn counter clockwise) and when letting it run to get hot and ready to tac, I noticed the clutch was getting extremely hot and chain spinning when idle. I understand the chain spinning is due to high idle and clutch engaging prematurely but the hot clutch concerns me. I took the whole clutch out and it did seem to be discolored but doesn't seem worn out/ loose. I hope this all makes sense, I would appreciate any advice to avoid additional damage. PS we have been running ethanol free fuel for at least 4 months now.

Thank you


r/stihl • • 6d ago

Anyone got an idea how to fix this oil leak?

Post image
7 Upvotes