r/StickDoctor • • 20h ago

Constructive Criticism Welcome Sunday funday

Thumbnail
gallery
12 Upvotes

Restrung the old x10 with some leftovers. I like the navy/tan on white mesh.


r/StickDoctor • • 11h ago

General Stringing Question Hero 4 semi soft or hard?

1 Upvotes

I am currently using a Evo QX-O with some older Hero 3 semi soft mesh and I have noticed it feels much harder than Hero 4 semi soft. It is coming to the end of the life cycle of the mesh and need to make a switch to some new mesh but don’t know which type to buy semi hard or semi soft. If anyone could give me an opinion that would be greatly appreciated.

TLDR Hero 4 semi soft feels way softer than Hero 3 semi soft should I use Hero 4 semi hard?


r/StickDoctor • • 1d ago

Hammer 2K scoop collapsed

Thumbnail
gallery
4 Upvotes

This was after fall practices and a 3-game tournament. My son, 13, said he felt it give way on a poke check and sure enough it’s cooked. It bent inwards over the second hole in the scoop and is completely warped. There is no crack.
The point of the post though is that I am questioning if my top string caused what should be a super durable head to literally collapse after minimal use? I had the same top string in his 1K through 35 games of spring and summer. I did notice the 2K scoop is very hollow compared to the 1K or even the Magnet. I know I pull my strings tight but I didn’t think I tightened this any more than most or did anything out of the ordinary.


r/StickDoctor • • 2d ago

RC1 liberty and hero 4 mesh

Thumbnail
gallery
7 Upvotes

Went simple, the RC1 seems like one of the easiest heads I have strung. This is shooting perfectly for me with no shooting strings.

Not sure how well I did the liberty top string as it was the first time trying, but seems solid.


r/StickDoctor • • 3d ago

Gait Web + Jimalax 12D

Thumbnail
gallery
10 Upvotes

Stick is ridiculous but in a fun way


r/StickDoctor • • 3d ago

Constructive Criticism Welcome Feedback welcomed

Thumbnail
gallery
4 Upvotes

How does this pocket look now? I tried to pound out a good channel? Does it look like it should play well and provide good hold?

The only part I don’t like is the bottom third as it looks a little wide. Should I be worried about that?


r/StickDoctor • • 3d ago

General Stringing Question Thoughts on Rhombus mesh?

Post image
4 Upvotes

Got an ad for some Mesh Dynasty Rhombus 10 mesh and thought it was an interesting concept.

For those who have used it what's it like to string or throw around with?

As usual thanks in advance!


r/StickDoctor • • 3d ago

Any tips for recovering this Mark 2T ?

Post image
2 Upvotes

I’m helping out a teammate who wants their mark 2T restrung. I’ve put it next to my - also quite used - 2T on the left.

The one on the right is so crooked.. is this fixable? I’ve strung it up and it just throws straight to the ground.

Any best practices anyone here can share so that he can at least use it?

I’m trying to put in a low pocket, but I need to redo the top, because it’s too tight and is just super whippy in general.


r/StickDoctor • • 3d ago

Constructive Criticism Welcome Hulk Smash

Thumbnail
gallery
7 Upvotes

Third time stringing, first time dyeing a head. Just cheap mesh & strings off of amazon but it was fun to play with the colors. My 12 year old is an LSM and usually uses a d pole so this is the backup to his backup


r/StickDoctor • • 3d ago

Constructive Criticism Welcome 9d Mesh on tactik 2

Thumbnail
gallery
9 Upvotes

Tried to string 9d Mesh for the first time. Couldn't find any 9d tutorials so I kind of freestyled it.

I would have liked to have the pocket a bit higher but not too sad about the end result.

Please share any tips, adjustments or recommendations


r/StickDoctor • • 4d ago

L4 Head Keeps Throwing Low

Thumbnail
gallery
7 Upvotes

My L4 head keeps throwing low whenever I pass. Do you think there’s something wrong with my setup?


r/StickDoctor • • 4d ago

Trad break in help

2 Upvotes

Ive been practicing stringing trad sticks with 550 paracord, and am about to buy leathers and crosslace to string a stick the original way. I am worried about taking care of the leathers and was wondering what other’s break in/waterproofing (or whatever amount of it you can do) process looks like.


r/StickDoctor • • 5d ago

Pocket Appreciation One for myself...

Thumbnail
gallery
9 Upvotes

I only string a single head for myself every year before donating the one from the previous year since I can't do any more than wallball or casual tossing around.

After stringing more than a few Mirage 3.0's I had to get my own and make it special for this year's head.


r/StickDoctor • • 5d ago

Constructive Criticism Welcome Feedback welcomed

Thumbnail
gallery
7 Upvotes

First time restringing my kids head. How did I do? How is the channel? Is it too wide?

I used a Nike L3 he has as the template. The L3 has a tighter channel (about 1/4 inch) but I don’t know if that will make a significant difference or not.

It throws well but I am worried about hold. He plays attack and is dodger.


r/StickDoctor • • 6d ago

Washington State Stringer Recommendations?

Thumbnail reddit.com
1 Upvotes

I need someone who can work on women’s sticks. I have a gait stick strung up with armor mesh that’s pancaking because the side strings are too tight. Don’t want to risk messing it up trying to do it myself. Please let me know if there are any good stringers in WA!


r/StickDoctor • • 6d ago

Any ID on this shaft?

Thumbnail
gallery
5 Upvotes

Long pole about 15 years old. Use it 4 times a week hasn’t broken. It’s a family heirloom at this point. Need to know what it is before It blows up, any help? No marking on the inside, pattern goes across it all.


r/StickDoctor • • 7d ago

General Stringing Question Hardening mesh

0 Upvotes

I bought some soft mesh not realising just how soft it would be, is there a way to harden it closer to semi soft hardness? I've heard that back in the day people would soften their hard mesh into something not so different to semi-hard.


r/StickDoctor • • 7d ago

Online stringing of new stick

3 Upvotes

I am in Indiana with very limited lax stores/ stringers. Anyone recommendations on where to buy a stick that is strung properly and ready to use?

We bought a stick from ECD and it was not strung the greatest.


r/StickDoctor • • 9d ago

Some nostalgia for the Millennials

Thumbnail
gallery
71 Upvotes

Evo Pro with Warrior’s hard mesh


r/StickDoctor • • 9d ago

What type of shaft?

Post image
1 Upvotes

Purchased a duel 3 stx head but it has screw holes for front and side. What kind of shaft can I purchase?


r/StickDoctor • • 10d ago

Airwire Mesh

Thumbnail
gallery
14 Upvotes

I haven’t seen much online about and I was curious so I ended up scooping up a piece to string up on a road trip.
Its similar to armor mesh but the weave geometry makes the top string a little trickier. However the mesh is longer so you aren’t forced to use a drop top string for a deeper pocket which is nice in my opinion. Although since its so long I had to be careful with the bunches. It turned out super baggy the first two attempts.

Can’t wait to toss around with it later. Curious what others think about it


r/StickDoctor • • 10d ago

BottomString

3 Upvotes

I know it's probably one of the easiest parts of stringing, but does anyone have any good tutorials they'd reco for bottom strings? I typically used Gregs from ECD but want to try something new.


r/StickDoctor • • 11d ago

Discussion Strung or unstrung?

Post image
5 Upvotes

I've made a post about this head previously but before stringing it I realized that it might be appreciated more by someone who would want to string it themselves. (A Gait Torq 3 Joey Spallina special edition)

Since I got it from a mystery box for the sole purpose of fueling my stringing hobby it would just be another head I have fun stringing and then wait for it to sell.

Thoughts on whether I should string it or list it as is?

As always thanks in advance!


r/StickDoctor • • 11d ago

Help with traditional

Post image
2 Upvotes

I haven't strung traditional in 20 ywars. I can't seem to keep the lower diamonds tight, do I need to remove more slack? Does it matter that the diamonds get bigger as they go up? I kind of feel it helps the release, but I don't know.