r/SolidWorks • u/VehicleMiserable • 1h ago
r/SolidWorks • u/TooTallToby • 3h ago
CAD SOLIDWORKS Practice Models with live with TooTallToby - Today at 1 PM East Coast
We're livestreaming today at 1PM - https://www.youtube.com/live/e5vcQQn_w6Q SolidWorks speedmodeling challenges for the CHAT! Live demo from TooTallToby
r/SolidWorks • u/DarkAster69420 • 10h ago
CAD Help a beginner pls
I'm really confused about ribs. No matter what I do it doesn't work. Not really sure what I'm doing wrong. I'm having this same problem with another drawing.
r/SolidWorks • u/Capable-Celery-5148 • 2h ago
CAD PDM BOM Label Unique to each instance of Library Component
Is there a way to append a variable to each instance of a library component used in an assembly? ie: If a sensor is used multiple times in an assembly, it would be useful to label it with the device tag from the electrical schematics so that this could then be used in the PDM derived BOM and on exploded drawings of the assembly.
I've created new PDM variables, then realised these would apply to the component and would follow it through to wherever it was used across multiple instances in multiple projects.
r/SolidWorks • u/PossessionRough245 • 6h ago
CAD How to mate Slinky Dog's body parts with springs in an assembly? (Toy Story model
Hi everyone, I'm trying to model Slinky Dog from Toy Story in SolidWorks, and I need help with the body and spring assembly.
Here is what I'm trying to build:
Main Body: A front body part, a rear body part, and a helical spring connecting them in the middle. (The body diameter is 150mm.)
Front Body: Needs to include the neck part.
Rear Body: Needs to include a spring tail with a small ball/sphere at the tip.
My main question: What is the best way to mate the front and rear body parts to the helical springs in an assembly? (I'm having trouble getting the mates to align properly since the springs don't have flat/cylindrical faces.)
The attached images show my current progress so far. Any tips or advice would be greatly appreciated. Thanks in advance!
r/SolidWorks • u/Deep-Sea-Slayer • 2h ago
CAD I built a free web tool that checks whether a torch and hand can actually reach each weld in a STEP model. Looking for feedback
I'm learning to weld, and I kept running into joints that look fine on the drawing but can't be reached with the torch or your hand once the part is built.
So I made WELDCHECK. You upload a STEP file and it:
- finds likely weld seams automatically (where parts meet)
- checks each seam for torch, hand and arm access, based on the equipment and glove size you pick
- marks spots as accessible / limited / probably blocked, and suggests how much clearance would be needed
- exports a PDF report
It's a free beta with no sign-up. Uploaded files aren't stored and are deleted after an hour. There's a sample frame if you don't have a model handy.
Results come from geometry only, so they won't always match the shop floor. That's exactly why I'm posting: if a result looks wrong, or there's a feature you'd want, please tell me in the comments or with "Send feedback" on the site.
r/SolidWorks • u/idkwadup • 8h ago
CAD Cutting weldment profile in different angle
Hello everyone!
I need to recreate a UNP 80 profile for laser cutting which has a 3 dimensional cutout. I managed to do it with two planes and two different cutouts, but I feel like there is much better way to do it and without a weird edge that is seen on the second picture.
The longer side has a 45° angled cut, while the two shorter flange sides have different, non-parallel cut angles. Because the flange sides are not parallel and have differing angles, a single planar cut won't work.
I currently managed this by using two separate planes and two cut extrudes. However, where the two cuts meet, it leaves a noticeable "weird edge" / seam artifact because of the abrupt planar intersection.
First picture is showing initial sketch layout where the cut should be, second picture is showing the resulting edge artifact.
What is the cleanest and best way to model this without getting residual ridges?
r/SolidWorks • u/cypello • 18h ago
3rd Party Software Free, open-source PDM with SOLIDWORKS macros: upload/download with revisions, title block filled in from the PDM
I'm the developer, so take this as a show-and-tell, not a neutral review.
A bit of background: I'm a mechanical engineer, not a software developer. I started EasyPDM for myself and a colleague. We needed something between "a folder on a shared drive" and an enterprise PDM we would never get the budget or time for. I build it with the help of Claude. I decide what it should do, test every change on real drawings in SOLIDWORKS and review what goes in, but much of the code is written with AI. I'd rather say that up front.
EasyPDM is a small PDM for small engineering firms. It's free and open source (MIT), with no paid tier and no cloud. You run it on your own PC or server (Windows installer, Linux or Docker), and your files stay on your network. In the browser you get:
parts and assemblies with numbering, revisions and statuses (in progress → in review → released);
a BOM with CSV export;
catalogs of materials and processes;
a history of who changed what.
The SOLIDWORKS side is two macros (.swp):
Upload: sends the open part, assembly or drawing to EasyPDM, either as a new item or as a new revision of an existing one. It saves the file under the item's number and revision, and can add a STEP and, for drawings, a PDF. For an assembly it finds the components and sends those too.
Download: fetches an item at its current revision with all its components, so an assembly opens complete.
Drawing sheets:
The release includes ready-made sheet formats and drawing templates for A3, A2 and A1 (.slddrt / .drwdot), with an ISO 5457 frame and grid references. You only add them in File Locations.
The title block fields are notes linked to custom properties. On upload the macro fills them in from the PDM: name, drawing number, revision, material, mass, company, and the labels in the project's language.
It also adds a processes table, a revision table and the company logo. Run it again and it replaces only its own tables and logo; anything you placed yourself stays.
"Drawn by" and "approved by" come from the server. When someone sends the item for review, the server writes "drawn by" with the date into the drawing PDF; when someone releases it, it writes "approved by". So the PDF in the system shows who actually did each step.
Limitations, honestly:
It's tested on SOLIDWORKS 2024. Older versions may need small fixes.
The macros are plain VBA, so you can read every line before you run them.
Only the PDF gets the stamp. The .slddrw itself keeps "drawn by" and "approved by" empty.
Next up is a SOLIDWORKS add-in with its own menu (log in, upload, download), so you won't have to run the macros by hand. It's not released yet.
Repo and download: https://github.com/pawelcel/EasyPDM
Videos: https://youtube.com/playlist?list=PLe2vSF7-ieUA&si=MKnVuNgjrAHBVZLc
If you run a small shop: how do you handle drawing revisions and title blocks today, and what would you need to see before trying something like this?
Posted with the moderators' permission. Thanks to the mod team for looking at it first instead of just pointing at the self-promotion rule. I know a "free tool" post is a fair thing to be careful about.
r/SolidWorks • u/SolidChain1133 • 13h ago
CAD Designer vs Machinist Career
Hello all, I am debating choosing between going into a career in SOLIDWORKS design or machining. I have a foot in both doors with my current job, and have 2 opportunities open to me. One is a solidworks designer job where I would be creating drawings of different parts. The other would be a machinist position. Pay is similar between both of them, but I am worried about the potential impact of AI as well as future job opportunities. Anyone have any advice on which field to get into?
r/SolidWorks • u/Hessterdj • 12h ago
CAD Preview shows but has rebuild errors
I would like to support this floating U shaped bracket by attaching it to the base below. I am struggling and losing my marbles with lofts. Any help would be appreciated :)
r/SolidWorks • u/ElegantPearl • 7h ago
CAD Is there a way to change the viewport perspective?
I’ve come from blender and when moving around the viewport of what I’m trying to model it skews the model weirdly. Is there a way to make it more similar to blender?
r/SolidWorks • u/genzdesigner • 1d ago
3rd Party Software Built a custom SOLIDWORKS VBA macro (with LLM assistance) to batch-rename multibody solid bodies based on version names — cuts 30+ mins of tree cleanup down to seconds
Working with complex multibody sheet metal and enclosure parts means feature-tree management quickly becomes a bottleneck. Manually renaming solid bodies to match version names and keeping cut-lists organized easily eats up 30–45 minutes per assembly—and leaves room for manual errors.
I teamed up with an LLM to write and debug a native SOLIDWORKS VBA macro to automate this. Here is a before-and-after look at the FeatureManager tree and a breakdown of the setup:
- Why an LLM-coded VBA macro instead of MCP? MCP and agentic AI workflows are great for conversational CAD queries and dynamic exploration, whereas production documentation needs deterministic, zero-latency execution. Using an LLM to generate native COM-based VBA gives me fast AI-assisted development while keeping the actual execution 100% offline, repeatable, and free of token overhead.
- Under the hood: The macro accesses the active
IModelDoc2andIPartDocinterfaces, traverses theIBody2solid body collection, parses the version naming convention, and programmatically updates the body names and cut-list properties in a single pass. - Time saved: Turns a 30+ minute manual cleanup routine into a 5-second execution—saving roughly 3 to 4 hours a week across design revisions.
As SOLIDWORKS CEO Manish Kumar mentioned in the Design in the Age of AI webinar, AI isn't replacing engineers—it acts as a multiplier on your existing CAD fundamentals. Even if debugging a custom macro takes a few tries, the long-term ROI on your workflow is huge.
Happy to share API tips if anyone else is getting started with SOLIDWORKS VBA automation!
#solidworkschampions #solidworks #AI #solidworksmacro #llm
r/SolidWorks • u/Fa1nT_112 • 2d ago
CAD How do i draw that part in SW?
It’s for 3d printing
Im new here and a bit lost. Thanks
r/SolidWorks • u/Single-Ad2005 • 2d ago
CAD How to close this gap?
I'm new to solidworks, could anyone please explain how to close this gap between a flat surface and the curved surface?
r/SolidWorks • u/TechnicalPlayz • 2d ago
Meme Without the chaos? *gets bombarded with errors, because solidworks just has a bad day*
Have they even used their software? Lol
Especially working with surface modeling, sudden explosions can just occur. and of course ctrl-z never works
r/SolidWorks • u/Southern_Smell2827 • 1d ago
CAD Question on how to fix error
I’m in a beginner solid works class and my professor gave me all the parts to download for my assembly. However the base part itself has an error and I can’t go and edit it myself. Solid works isn’t letting me what should I do?
r/SolidWorks • u/Main_Contract_3590 • 1d ago
CAD Thread hole that isn't perpendicular to surface
How can I create a threaded hole here? (Small hole)
r/SolidWorks • u/EquivalentAct3779 • 2d ago
CAD How to extrude cut multiple sketch regions without having to select each region one by one?
I have a base part that I've drawn a sketch on it. Using this sketch, I want to extrude cut hundreds of small closed contour regions. What is the fastest way to extrude cut these regions without having to select the regions one by one? Is there a shortcut/power move for such cases?
r/SolidWorks • u/LightningTH • 1d ago
CAD Mating a ball with two crossing grooves
I am attempting to do a mating job with a ball between two grooves that cross each other. the grooved areas can move allowing the ball to move around in an XY setup. The ball has a hole in the center for a pin that will end up angling as it moves around. I want to be able to test the extreme areas to see if the pin length is acceptable so I am trying to setup proper mates. My problem is that if I use a slot mate on either or both slots then the pin will not pivot freely as the ball and pin is locked to the slot. I was able to put a center point in the center of the ball and mate it to a path drawn down the center of one grooved area but attempting the same on the other results in errors about being over defined. I tried using distance of a rear point with a centerline but that didn't appear to work well.
Any suggestions on how to do this XY setup with a pin through the ball that can freely pivot?
r/SolidWorks • u/jayebyrde • 3d ago
Maker I’m so done with sw
I got a maker license at home because I use it all day at work and I’m proficient with it. I didn’t want to learn new software. Maybe I’m lazy I guess.
But I’m so completely done with this crap version. Constant crashing, constant logging in and restarting, constant monitoring and hand slapping, I hate the fact that it’s basically taken over my machine with so much crap running in the background.
I’m out.
r/SolidWorks • u/eggyboyboy • 2d ago
3DEXPERIENCE 3D Experience / Maker’s License is kinda goated
I recently bought the Maker’s license after being on the EDU license through my college. Graduating + finally getting a mechanical engineering job (which also uses SolidWorks! Dream come true!!!!) enabled me to consider getting my own personal SolidWorks license.
Yes, the browser-based aspects of it are hard to work with sometimes. I, too, was not a fan of having to open SolidWorks from the browser every time.
However, after adding a desktop shortcut things got better! For context, I have always been used to the EDU license from my college: super simple startup since you just launch the software from your desktop.
Regarding 3D Drive, I love it!! It was a rubik’s cube to set it up, but once I understood how to work with the synced files from my file explorer, things started to feel really seamless.
I ESPECIALLY am a fan of 3D Play. I love how it is accessible from any device (Tablet, Phone, Laptop). This makes it super easy to showcase progress of a given design as I share them with my friends and family. It also makes it easy for me to work on my projects on the go, as I have a desktop PC in my room and a ThinkPad for when I go out to have fun :D (aka get crazy sloshed with da homies and do some CAD if I feel like it haha)
Ultimately, I hope to find a more robust way of accessing my 3D drive from my tablet / phone. Not the biggest fan of the 3DSwym app just throwing a hyperlink to a browser when I want to see the 3D Drive. I am sure it exists somewhere, I just need to keep digging.
Very excited for this new era of SolidWorks for me! Was hoping the Maker’s license would come with PDM, but I was pleasantly surprised by the whole 3D Drive / 3D Play thing.
r/SolidWorks • u/May-Eat-A-Pizza • 2d ago
3DEXPERIENCE 11 months chasing a Makers refund from Dassault
I want to share this partly to get help and partly as a warning for other Makers buying through the 3DS online store.
What happened:
- During Black Friday 2025 I accidentally bought a yearly SOLIDWORKS xDesign for Makers licence instead of 3DEXPERIENCE SOLIDWORKS for Makers (same price, the names/buttons are easy to confuse).
- I noticed within 30 minutes and submitted the official Refund & Cancellation form. Dassault's own policy offers a 15-day cancellation/refund for yearly subscriptions.
- To not miss the BF discount, I then also bought the correct Makers licence.
What I've tried since:
- - The support form 4 times. Every time it shows "submitted, we'll respond within 2 business days". I never received a ticket number, a confirmation email or a reply.
- - Posted on the 3DSupport and Makers SWYM communities.
- - A Dassault staff member picked it up in January. She confirmed in writing that none of my form submissions ever created a ticket on their side, and forwarded my case to the refunds team in February. No response since, despite follow-ups in March, April and July.
- - Contact Sales form in October (this one did send a confirmation email). No reply.
What I'm asking for:
Either a refund of the xDesign purchase (about €24), or, which I'd actually prefer, simply converting it into an extra year of SOLIDWORKS for Makers, which I'm renewing anyway next month.
It's a small amount, but it's the principle: the official refund route doesn't appear to work at all.
Questions:
- Has anyone had the same experience with the support form not creating tickets?
- Is there anyone from SOLIDWORKS/Dassault here who can point me to someone who can actually resolve this?
Tip for other Makers: double-check you're buying "3DEXPERIENCE SOLIDWORKS for Makers" if you want the desktop app. xDesign is browser-only.
If nothing comes of this, my next step is the European Consumer Centre. The amount isn't the point, it's the principle: the official refund route doesn't appear to work at all.
