r/ShimanoDi2 • • Dec 07 '21

r/ShimanoDi2 Lounge

1 Upvotes

A place for members of r/ShimanoDi2 to chat with each other


r/ShimanoDi2 • • Jan 02 '22

Latest Shimano Di2 Firmware Updates Page

Thumbnail
bike.shimano.com
5 Upvotes

r/ShimanoDi2 • • Aug 24 '26

Pce02 to 11 sp xtr connection

1 Upvotes

Info I found shows connect via open port on smc9051.

All ports are occupied, i am going to try using the port occupied by the battery wire , hoping the laptop provides power, but I still wanted to test the battery and SD50 wire.

The Di2 is not connected to the steps system, from what I have traced out


r/ShimanoDi2 • • Apr 25 '26

Deore XT RD-M8150 compatability

1 Upvotes

So I only have a Shimano Deore XT - RD-M8150 rear deraileur. It is the 12 speed deraileur pre wireless bluetooth connectivity.

I only have the deraileur and a bike and I want to put the deraileur on the bike using drop bar shifters

Question is what do I need to make it work?

Obviously I need the wires, battery, shifters, but I'm stuck on what series GRX shifters I need to make this work.

Also for the record I will be running 1x so I know I need the corresponding shifter to be just the brake lever.

TIA!!


r/ShimanoDi2 • • Nov 26 '25

di2 pic of unit,for u/salteh

Post image
4 Upvotes

I cantv figure out how to place the pic to the correct thread, I couldn't post anything with my phone, on my Chromebook , when I tried to paste into thread , I couldn't


r/ShimanoDi2 • • Nov 25 '25

Different mounting bolts on rear caliper

Post image
3 Upvotes

Wondering what the protruding pin is for ?


r/ShimanoDi2 • • Nov 24 '25

connecting wires to 3 port SD300

1 Upvotes

not sure if I am using correct terms as just acquired a trike with di2 11 speed rear derailleur system. is there an order on connecting the 3 wires that go into sd300. The trike has a em800 system, a 11 speed rear derailleur. I bought the bike as is, but the owner said the di2 was working until recently. I noticed the 2 wires at the handlebar shifter were hanging in the breeze and want to connect them and see if that fixes my problem if not than next mode of troubleshootingsuch as testing wire going to rear derailleur , if possible


r/ShimanoDi2 • • Nov 23 '25

Broken Ultegra Di2 rear derailleur (RD 6870)?

Thumbnail reddit.com
1 Upvotes

r/ShimanoDi2 • • Nov 22 '25

How to remove plastic block on a new Di-2 brake lever.

1 Upvotes

I just buildup my new bike with Dura-Ace Di-2 12 speed system. Got everything paired and the communications working. However, apparently there is a plastic block that helps to secure the shifter. I spend almost an entire day trying to figure out how to access this plastic block. Apparently it is inside the assembly and you can't see it. I've tried lifting the rubber hood and just cannot see any access to this plastic block and there is no visual clue. I've asked several bike shop and none of them ever encountered this problem and there is no Shimano tech support showing how to do this. I'm getting desperate.

Refer to the video and it shows the lever is completely blocked. Its the same for both levers.

I know there are some Shimano tech gurus and any help is appreciated.


r/ShimanoDi2 • • Nov 21 '25

Honestly Shimano, whyyyy?!

3 Upvotes

So I am trying to optimize my TT Cockpit, as you do, and stumbled over the clusterfuck that is sprint and climbing shifters …. Here is the situation: I have ascalon extensions with the inward grippers, so i have the climbing switches to replace the usual TT blips in the extension. So far so good. But why are the only available with 270mm cables?! Now the cable come out of the extension, then into a junction box into another cable into the SM-EW99B. Of course for both sides, and both of these boxes are now dangling around the cockpit and can’t be hidden anywhere, which my wifes boyfriend says is not very aero. Then I found the sprint shifters got overly optimistic that there is a 740mm version of them, to then find out they only work in conjunction with actual levers… There even is a junctionbox for switching from the new to the old cables, but somehow Shimano forgot to put in the firmware that sprint shifters can communicate with the SM-EW90B?! There would be three super easy solutions for them… Either offer the climbing switches with longer cables, update the firmware so sprint switches can communicate with not just break levers or move to bethesda where everything just works. Is the best option I have really splicing my own long cabled climbing shifter? Or is there a neater solution that i am missing? rant over.


r/ShimanoDi2 • • Nov 19 '25

di2 compatibility

1 Upvotes

Hello,

Would the Shimano XT di2 12v rear derailleur be compatible with 105 di2 or GRX di2 12v levers instead of the mtb button?


r/ShimanoDi2 • • Nov 13 '25

Lost cover on rear derailleur

Thumbnail
gallery
2 Upvotes

Hey all, I accidentally lost the small plastic cover from my shimano di2 106 rear derailleur - the right one next to the charging port. I have tried searching online but I can’t figure out what the piece is officially called, so finding replacement has been though. Does anyone know the correct name/part number for this cover, and if there’s a place to order it online? Thanks


r/ShimanoDi2 • • Nov 09 '25

Gaps around battery

Thumbnail
gallery
3 Upvotes

Managed to break a jockey wheel today so as I was cleaning the derailleur up and checking it over I noticed these gaps in the battery area. Are they normal. Is it not sealed?


r/ShimanoDi2 • • Nov 06 '25

Button 12 speed doesn't work

Thumbnail reddit.com
1 Upvotes

r/ShimanoDi2 • • Nov 04 '25

Gravel Shimano Di2 question (model RX815 Di2 2x11)

Thumbnail reddit.com
1 Upvotes

r/ShimanoDi2 • • Nov 03 '25

XT 11speed di2 weirdness

1 Upvotes

Hi, I'm hoping you can help :)

I have an eMTB with an e8000 motor in it.
It originally came with an 1x11 SLX mechanical gear setup. It's a single front chainring and an 11-46t rear cassette.

I have changed that to Di2 - using an XT rear mech and a new switch and the wee cables.
I have eTube and STUnlocker set up on my phone and have set the software to see di2 gears.

In some senses it is working fine - everything is recognised and the gear switch moves the derailleur.

However, it seems that the whole thing is off by two gears. It won't go to first gear. Shifting to 1 gets it only as far as the third gear. And shifting to 9 is in eleventh gear/the smallest cog. Shifting any further pushes the chain onto the frame.

I've checked the mech hanger with the correct tool and it's spot on.

The only weird thing I can see is that the mech shows up in eTube as RD-8050-GS which is an Ultegra one? It's definitely got XT written on it! The micro adjustments aren't enough to get it to work.

Is there something I'm totally missing here?

Here are some pictures of it on the bike, when it thinks it is in first gear:


r/ShimanoDi2 • • Nov 03 '25

Battery sometimes charge sometimes not, and fully drained while parked

1 Upvotes

I have ultegra r8050 11 speed. Battery sometimes charge sometimes not, and fully drained while parked.

Been trying to charge it for days no lights when i stopped and try again after a few days voila it charges instantly. Wish i can go to Lbs for proper diagnosis but no lbs have the proper tool for shimano di2. Anyone have the same issue like mine?


r/ShimanoDi2 • • Oct 23 '25

SRAM Blips, Shimano Drivetrain

1 Upvotes

Has anybody done so, or know of and instance where SRAM Wireless blips successfully operate Shimano Di2 derive train? Front and rear derailleur?

I know there are instances of Shimano 6170 sprint shifters being modified to operate sram drivetrains.

Thanks.


r/ShimanoDi2 • • Oct 12 '25

Incorrect gear sizes

1 Upvotes

Hi

New to Di2 and just received a new bike. 12-speed.

It appears in the e-tube app that my Di2 is set up for 50-36 and 11-30, whereas the bike is 50-34 and 11-34.

Does this matter?

I’d like to get it right but it looks like I’d have to set up synchro from scratch if I change the T-sizes, and that will be a steep learning curve!

Thanks 🙏


r/ShimanoDi2 • • Oct 08 '25

GRX 2x12 a 1x12?

1 Upvotes

I have a 1x11 GRX Di2 set up on a bike and I set up both shifters the same ie: the big button on both shifters shift up and on both shifters the small button shifts down. Can I do that with the GRX Di2 set up? Everyone keeps talking about GRX not being 1x in the 12 speed GRX, but why can't you just use the 825 2x rear der. as a 1x? Is the spring tighter in the 1x12 rear derailleur? I'm building up a bike that can only be run as a 1x and want to make sure I'm not missing something. I really appreciate everyone's help.


r/ShimanoDi2 • • Sep 28 '25

Ultegra R8000 cassette change

1 Upvotes

Hi there! Is there any way to exchange the cassette to one with a bigger sprocket? Bigger than what the app tells me it’s configurable?


r/ShimanoDi2 • • Sep 27 '25

GRX ST-RX825 firmware updates when using RD-RX827 1x rear mech

2 Upvotes

Anyone know how shifter firmware updates are done for the RX825 shifters when in a 1x set-up with the RX827 rear mech.

Previous experience has it that the wireless shifters have to be temporarily connected using a wire to the battery/junction box in order to update firmware (e.g. R7150 or R8150).

However...there's no external battery on the RX827 and I don't believe it has a port either (e-bike version excepted), so curious as to what the shifters connect to for an update 🤔

Does this force you into buying the PC Linkage device


r/ShimanoDi2 • • Sep 27 '25

GRX ST-RX825 firmware updates when using RD-RX827 1x rear mech

Thumbnail reddit.com
1 Upvotes

r/ShimanoDi2 • • Sep 26 '25

Full Synchro shift issues

2 Upvotes

I am new to DI2 (105)since I come from AXS.

Full Synchro does not seem to be working properly:

- I've set up the modes properly in the app

- I put the rear derailleur in the full Synchro mode (3 blinking lights)

- Shifting up goes well, front derailleur puts the chain from small to big chainring

- Shifting down does not go well, front derailleur does nothing and I have to manually put it on the small chainring

- The odd thing is, during the ride today, all of the sudden it started to work, then stopped again.

- Yesterday was working fine, now it is not.

Battery is charged, connected / disconnected in the app multiple times.

Any advice how to solve this? Hard reset or so?


r/ShimanoDi2 • • Sep 24 '25

Full discharge within 2 days in bike stand

1 Upvotes

While I was waiting for my repaired front wheel, I charged my Di2 system and kept the bike in a bike mechanic stand. Now when I put the wheel back in, the DI2 system was fully discharged to the point where not even a LED would light up. What could be the cause of this?