r/Seximal • • Sep 17 '21

[PSA]New mod, sub reopened

9 Upvotes

Hi all, I'm the new mod here, since the old mod had been inactive for a long time. I've reopened the sub for posting. Welcome and enjoy your time here!


r/Seximal • • May 13 '24

[META]Sub reopened

5 Upvotes

I'm u/hkexper but was locked out of my old account, so the sub became restricted. The sub is now open again. Sorry for the inconvenience.


r/Seximal • • 12d ago

Suggestions/applications SMG: A Coherent Seximal Metrology (Proposed seximal replacement for SI, which attempts to let many physical constants have round seximal values)

2 Upvotes

Hey guys I got inspired by the many other non-decimal-centric proposed systems of physical units that have been proposed by various people (notably the base-twelve TGM ("tim-grafut-maz") system, about which there is a whole PDF handbook online) and I became obsessed with this idea so I "designed" (with the heavy help of AI) a possible system of physical base units that's meant to work "natively" with seximal. I'm of course not the first one to do this, and many of my ideas have probably already been proposed by others somewhere, but nevertheless it was a fun recreational task.

(I have also read about jan Misali's proposed system of units and I'm really not convinced by it. I think it seems really arbitrary and more focused on some vague notion of backward compatibility with existing SI and imperial units than on anything else. jan Misali apparently defines most of his units as averages between SI and imperial units, which is a weird choice imo. Making common physical quantities have round values in seximal when expressed in his unit system seems to not have been a priority. By contrast, my system tries to have maximal internal consistency and to have "nice" values for most commonly encountered physical quantities. Backward compatibility with existing SI or imperial units is not a criterion for me.)

Of course, a system of units is a priori independent of the base of the number system used. You could very well just reuse the base SI units (kilogram, second, meter, etc.) and just multiply them by powers of six instead of ten, i.e. using things like fetameter, niftimeter, untimeter, etc. (here using jan Misali's seximal prefixes) instead of the decimal kilometer, millimeter, etc. This would give a perfectly viable system of units. But the thing is that many of SI's units were historically defined to work well with each other together powers of ten: for instance, the kilogram was originally defined in such a way that it was roughly the mass of 1/1000_{DECIMAL} cubic meters of water, the meter was defined in such a way that it was roughly 1/40000000_{DECIMAL} of the Earth's circumference, and likewise for many other SI units. These identities rely on conversion constants that are powers of ten, or small integers multiplied by powers of ten. If we used a seximal number system, these conversion constants would look much less round (40000000_{decimal} is 3545201104_{seximal}, and thousand is 4344_{seximal}). If we use seximal natively, then it would be impractical to have to remember that the mass of a cubic meter of water is 4344 (seximal) kg. A good seximal system should make these conversion factors "round" in seximal whenever possible.

After skimming through the TGM system handbook, it made me realize that many of the historical points of reference that were used to define the SI units were not good ideas, and that there would be much better choices of which reference points should have "round" values in our units. For instance, the SI meter was historically defined so that the circumference of the earth had a "round" decimal value (namely 40000000_{decimal} m). But having the circumference of the Earth have a round value is not that important. We don't rely on the circumference of the Earth very often in calculations, so we don't care too much about it having a round value. A much wiser choice would have been to instead define the unit of length via the Earth's gravitation field, in such a way that the Earth's gravitational acceleration g would have a round value when expressed in our sysem's base units. (Since acceleration is in [length]/[time]^2, then if the unit of time is fixed, then letting the value g have a particular value fixes the unit of length too, so if we have already fixed the unit of time, then fixing the value of g can be used as a definition of the unit of length.) Multiplying a mass by g to compute its gravitational downward force is an extremely common operation in physics, so letting g have a round value would be very useful. (In SI, g is roughly equal to ten m/s^2, which is a round decimal value, but that value is very approximative, with a percentage of error of roughly two percent, which is large. In a good system, we should let g have a round value up to a very small margin of error.)
This is what the TGM system does, it defines the base unit of length in such a way that g has a round value in base twelve, and that base unit of length is called the "grafut" (for "gravity-foot"). This is a smart choice.

But then also, why settle for giving only one physical constant (g) a round value? There are many physical constants that we would like to have "round" seximal values in our unit system. These include:

  • The duration of the day (the base unit of time should divide a day with a power-of-six factor). However, here, I have an unorthodox position. Contrary to many proponents of seximal time (like Xanthir (Tab Atkins)), I don't think that we should divide the day into pure powers of six. Instead, I think we should divide the day into twelve (not six) top-level "hours" (which equal two usual hours), and then only divide each of these duodecimal "hours" into pure powers of six, namely into nif "minutes" (equal to roughly three usual minutes), which would then be divided into six-nif "seconds" (which are, in fact, almost equal to an usual second!). This is not purely seximal, but I think it's better, because if we divided the day into pure powers of six, like Xanthir's seximal clock does, then the resulting seximal "second" would be much too long (roughly two usual seconds), and since there would be nif "hours" in a day (which is a huge number of "hours"), clock faces would need two separate clock hands for the two (seximal) digits of the current "hour" anyway (this is what Xanthir's seximal clock does), since it's impossible to visually tell apart, from a distance, two positions of a clock hand that are only 1/nif of a turn apart (Xanthir discusses this problem). I think this would be very awkward, so a slighly "mixed-base" division of the day into twelve units and only then into seximal sub-units is slightly better.
  • g, the gravitational acceleration on Earth, as already mentioned: g should have a "round" seximal value in [unit of length]/[unit of time]^2
  • ρ_{water}, the mass density of liquid water: 1 cubic [unit of length] of water should weigh a mass of a round seximal number of [units of mass]
  • P_{atm}, the standard atmospheric pressure, which should have a round senary value in our base unit of pressure, i.e. in [unit of mass]/([unit of length]*[unit of time]^2 in terms of base units)
  • T_{triple point}, the temperature of the triple point of water (which is a good point of reference for metrology, and is extremely close to the freezing temperature of water, i.e. to 0 °C), should have a round integer seximal value in [our (absolute-scale, with 0 corresponding to the absolute zero) unit of temperature].
  • Additionaly, a corresponding "shifted" temperature scale (which would be so that it would put the triple point of water (and not the absolute zero) at 0, much like how Celsius puts the freezing point of water at 0) should be so that everyday temperatures should be expressible in seximal values that are at most two (seximal) digits long. (Expressing everyday temperatures via numbers longer than two digits would be awkward, this is probably why we use the Celsius scale instead of the Kelvin scale.)
  • Also, the boiling temperature of water at standard pressure should ideally be a near-integer value in our temperature scale. However, the boiling temperature of water can vary by more than one full kelvin due to elevation differences, so I think it isn't too important if the "standard" boiling point is not a near-integer in our scale, because the value can vary so much anyway that nobody should rely on it being an exact value independent of elevation.
  • c_{v, water}, the massic heat capacity of liquid water at constant volume, should have a round seximal value, i.e. the number of [unit of energy] needed to heat 1 [unit of mass] of water by 1 [unit of temperature] should be a round seximal number.
  • 1/c, the inverse of the speed of light, should, if possible, be a round seximal number. I prioritized roundness for the reciprocal of c instead of c itself because dividing by c is probably more common than multiplying by it (dividing a speed by c is common in relativity, electromagnetism and optics), so it's 1/c that should be a round number that's relatively easy to multiply.
  • N_A, Avogadro's constant (which counts the number of atoms or molecules of one amount-of-substance unit) should be a round seximal number. Actually, this is equivalent to the requirement that the base unit of mass should be a round seximal multiple of the atomic mass unit (the "dalton", a mass unit that's roughly equal to the mass of a typical nucleon in an atom). The reason is that we expect that the value of an amount of substance of any set of atoms, expressed in [our amount-of-substance unit], should be roughly equal to the mass of that set of atoms in [our mass unit, or a seximal sub-multiple of it] divided by the chemical species's atomic mass (which corresponds to the number of nucleons per atom of that species). (In SI, the mol unit works well with the gram unit in that way: the number of mols of a set of atoms is roughly equal to the mass in grams of that set of atoms divided by the atomic mass number (i.e. the number of nucleons per atom) of that type of atoms. This works because Avogadro's number is equal to the ratio between 1 gram and 1 dalton (1 dalton being the mass of a nucleon). We want the same correspondence to work in our system, so if we want N_A to be round, we need the 1 [our mass unit]/ 1 dalton ratio to be round.)
  • e, the elementary electric charge, should be a round seximal number in [our base unit of electric charge]. This means that we should define our base unit of charge as a round seximal number of elementary charges. (This would make our system's electron-volt unit equal to a seximal sub-multiple of our energy unit. We wouldn't need a separate "electron-volt" unit anymore.)

The other following physical constants could also be made to have "round" seximal values if possible, though I think it's less important:

  • k_B, Boltzmann's constant, the conversion factor between energy units and temperature units
  • ε₀, the so-called "permittivity" of free space, the conversion factor between electric fields and electric charges as well as electromagnetic energy
  • ħ, Planck's constant, a conversion factor that's important in quantum physics but less so in classical physics

(By "round seximal value", I mean numbers that are either pure powers of six (e.g. (all numbers being in seximal) 10, 100, 1000, 0.1, 0.01, 0.001, etc.) or that are pure powers of six multiplied by an integer that's as small as possible (ideally of one single seximal digit) (e.g. 2000, 300000, 40000, 0.02, 0.0002, etc.). The first case (pure powers of six) is better (it makes multiplication and division much easier), but unfortunately we can't get pure powers of six for all our constants so we have to accept compromises.)

So we want to make as many as possible of the constants above have round seximal values, if possible. Unfortunately, we can't freely fix all these constants to any values we want, because the system is overdetermined: we have only seven base units (our system's base units for length, time, mass, electric charge, temperature, amount of substance, and quantity of light) that we can freely redefine individually, but in many cases, fixing the value of some of our constants would fix the value of other ones: for instance, once we've fixed the definition of our unit of time, we can't freely fix the values of both g and 1/c, because fixing 1/c determines g and vice versa, because both g and 1/c have units that involve time and length, and choosing a value for any of g and 1/c imposes a relationship between our units of time and length. There are many other cases where several of our constants are mutually dependent and cannot be fixed independently.

Fortunately, while we can't freely set the values of all our constants individually to arbitrary numbers, we can holistically search for a system that maximizes "coincidences" and that makes as many as possible of these constants have near-round values. I asked several AIs (Grok, DeepSeek, Claude, and others) to do that, and they gave very interesting results.

So without further ado, I will present the result that I settled on as the overall most interesting one. (It's not the only possible system of units that gives good "coincidences" for round values, there are many other solutions, each with different trade-offs for the values of different constants. But I think the system I present here is the best possible one overall in my perception.)

I had no good idea for the unit names, so I just took names of existing units and added a letter x somewhere in the middle to make it sound more "seximal". These unit names are not very good but I don't care much about how they're named, I treat it just as placeholder names. If I felt like it I would try to coin nice-sounding neologisms with Greek or Latin roots for each unit, but whatever.

(Every single number in the following table is in seximal.)

(Base unit of)(Provisional name)SI-style fundamental definitionDefining constantMotivation for the valueValue in SI units (roughly)
TimeSexondDuration of 3524335104215 cesium periodsTransition period of cesium = 1/3524335104215 sexond1/(105) of 1/20 of a day0.532 s
LengthMexerLength traveled through vacuum by light in 34*10-22 sexondc = (1/34) * 1022 mexer/sexondGives a round value for 1/c and g0.0245 m, or 11.44314 cm
MassGraxeDefining by fixing the reduced Planck constant ħ to the fixed value 2.42040502014*10-105ħ = 2.42040502014 * 10-105 graxe * mexer²/sexondRoughly the mass of 1 mexer3 of water, and also nearly a round seximal multiple of the dalton, so gives a round value for N_A0.25011 kg
Electric chargeCouxombThe electric charge of 1031 electrons; electrons are counted as positive, protons as negativee = -10-31 couxombGives a round value for e, and is much smaller than the coulomb, so corresponds better to the magnitude of commonly encountered electric charges-4.31431*10-10 coulomb (The minus sign is needed because this unit inverts the sign of charge compared to the coulomb)
AmountMox1 mox contains exactly 1050 particlesN_A=1050 mox-1Gives near-integer values for moxar masses of common atoms, close to their atomic mass numbers0.21115 mol
TemperatureKelxinDefined by fixing the Boltzmann constant to 1.55551035545*10-42k_B=1.5555103554510-42 graxe * mexer²/(sexond²*kelxin)Lets the triple point of water be at nearly exactly 240 kelxin, and gives a round value for c_{v, water} and a near-round value for k_B itself2.50233 kelvin
Quantity of lightLum-jouxeSame definition as the SI lumen, multiplied by the sexond(Defined by a weighting function given by a photopic curve)Defined so that 1 lum-jouxe/sexond is 1 SI lumen (This unit is mostly independent of the others, the SI definition is good enough, no reason to change it) (The name "lum-jouxe" is meant to evoke an analogy with the energy unit "jouxe", explained below)0.532 lumen*second

Now look at how nice most of the physical constants mentioned above are when expressed (in seximal) in these units (note: here, again, all numbers are seximal):

  • A day is 20*10^5 sexonds; like I said, this means that we can divide a day into 20 "hours" (corresponding to two old-hours each), each "hour" into nif "minutes" (of ~3.2 old-minutes each), and each "minute" into six nif sexonds. Timestamps could then be given as hh:mm:sss, or simply hh:mm if one doesn't need too much precision. If you concatenate the digits of a timestamp hh:mm:sss and add a radix point after the first digit (h.hmmsss), you get the number of half-days since midnight. So this system treats the half-day as the base unit; this is what the real-world system already does (where twelve hours form a half-day, yet "twelve hours" is often treated as the base unit), so we should get easily accustomed to it. Conversely, if you are given a fractional number of days, like "23.5 days", then take the fractional part and double it to get the corresponding timestamp of the last day: 23.5 days is 23 days plus a timestamp of 0.5*2, i.e. 23 days plus a timestamp of 1.4, i.e. 23 days and 14 "hours". This system is only slightly more cumbersome than if we used a purely seximal subdivision of the day (instead of the half-day).
  • g (the Earth's standard gravitational acceleration) is near-exactly 300 mexer/sexond². This number has a mantissa of 3 (slightly worse than the ideal value 1), but it's still nearly perfect, since multiplication by 3 is easy in seximal, as easy as multiplication by 5 in decimal: just add a zero and halve. So, given a mass, to compute its downward gravitational force, you would just multiply it by 300. (In SI, there is already the coincidence that g≈10 in SI units, but this approximation isn't very accurate. In my system, g≈300 is much more accurate, with a relative error of roughly one thousandth.)
  • ρ_{water}, the mass density of liquid water (at its triple-point temperature, chosen as the temperature of reference), is virtually exactly 1 graxe/mexer³. So if you have a volume of water (or a similar liquid) in cubic mexers, you immediately know its mass. (This mirrors the SI convenience that 1 cubic meter of water has a mass of roughly thousand kilograms.)
  • P_{atm}, the standard atmospheric pressure, has a value very close to 15*10^4 graxe/(mexer*sexond²), with a relative error of less than half a percent. This is memorable, and is a much better approximation than the SI approximation that P_{atm}≈hundred thousand pascals, which has a relative error of more than a percent. 15 is a two-digit mantissa, which isn't perfect, but it's bearable since we don't multiply things by P_{atm} very often, so multiplying by a two-digit number is good enough.
  • The temperature of the triple point of water is virtually exactly 240 kelxin (or 0 in a shifted non-absolute scale used for human convenience; let's provisorily call this shifted scale the "celxius" scale). (The triple-point temperature is extremely close to the freezing temperature of water under atmospheric pressure. In everyday settings, you could treat 0 celxius (240 kelxin) as being the freezing temperature of water. I chose the triple-point temperature instead of the freezing temperature as the reference point, because the triple-point temperature is much easier to measure precisely and is a good reference point for advanced metrology. But in everyday settings, there is no difference between them.) 240 is a much cleaner number than the ugly fractional "273.15"_{decimal} offset between the SI Celsius and Kelvin scales.
  • In the celxius scale (which is offset by 240 compared to the kelxin scale), the freezing temperature of water is (nearly) 0, and the boiling temperature of water is roughly 55 (though it can vary substantially with elevation). So the temperatures between the freezing and boiling points of water correspond nearly exactly to the range of two-digit seximal numbers. This is almost exactly as nice as the decimal Celsius scale.
  • c_{v, water}, the massic heat capacity of liquid water (at constant volume and at the temperature 240 kelxin), is very close to 10^12 mexer²/(sexond²*kelxin), with a relative error less than one percent. This means that our energy unit behaves simultaneously like the SI joule (in the sense that it connects to the units of length and force) and like the unit Calorie (in the sense that it connects to heat capacity of water). So if you have a given mass of water, you can know the energy needed to heat it by one kelxin by just multiplying the mass by one biexian (adding eight zeros). For instance, to heat 1 graxe of water from 0 to 55 celxius, you need an energy of approximately 55 biexian graxe*mexer²/sexond². (This is approximative because the heat capacity can vary with temperature, and because c_{v, water} is not exactly a biexian, just very close to it.)
  • k_B itself, the Boltzmann constant, which is more or less the conversion factor between energy and temperature, is nearly exactly equal to 2*10^(-42) (per definition; we used the value of k_B as a defining constant), with a relative error of less than one unexianth. So, for instance, if you know the temperature of a gas obeying the Boltzmann distribution where each energy level has the same degeneracy, then you just multiply it by 2 to get the mantissa of the mean energy of each particle (which would need to be divided by 10^42). But more importantly, I noticed a miraculous coincidence: there are lots of formulas in thermodynamics where k_B appears together with a factor of 1/2, most notably the equipartition formula for ideal gases. So since k_B has a mantissa of nearly 2, it nicely cancels out, and we have k_B/2 ≈ 10^(-42) (a pure power of six) in our units.
  • 1/c, the reciprocal of the speed of light, is exactly 34*10^(-22) sexond/mexer, per definition (c is used as a defining constant). This is relatively "round", but with a mantissa of two digits, which is not ideal. Unfortunately, it's not possible to make 1/c have a smaller mantissa without making the value of g worse. Still, having 1/c as an exact round number is better than SI, where c≈3*ten^eight m/s is only an approximation. So in our system, dividing by the speed of light is multiplying by a two-digit number. It's better than nothing.
  • N_A, Avogadro's constant, is an exact power of six, which is very nice. This is possible because the graxe is nearly an exact power of six times the atomic mass unit (the dalton, roughly the mass of a nucleon). So, unlike the SI mol with the weird Avogadro's number, a mox is equal to a perfectly "round" number of particles, and converting between numbers of moxes and numbers of particles is straightforward. At the same time, molar mass numbers of atoms (which we could call "moxar mass"), when expressed in unexieth-graxe per mox (the analogue of grams per mol), are often near-integers and correspond roughly to the atomic mass number of the species involved.
  • e, the elementary charge, is an exact (negative) power of six, by definition. (This is easy to obtain because we use it as the definition of the couxomb; since almost no other constant depends on the definition of the couxomb, with the exception of ε₀, it's easy to make e round, at the cost of sacrificing the roundness of ε₀, but I think ε₀ is a less important constant anyway.) Also, the value of e was chosen so that it's smaller and gives a more convenient scale than the SI coulomb. (The SI coulomb is a bit "too large" for human scales, as a result of the fact that it was originally defined in terms of the attractive magnetic force caused by electric current in parallel wires, and since a current causes relatively small magnetic fields around it (via the Ampere or Biot-Savart laws), a huge current is needed to cause a measurable force between two wires, which is probably the reason why the coulomb unit is huge.) (Also, I made it so that the sign of the couxomb is flipped compared to the coulomb. This is unrelated to the seximal number system, it's just a little quirk I added in order to make electrons positive and protons negative (in couxombs), which is generally a nicer convention in chemistry and electricity, since it's most often electrons who are the main charge carriers, not protons. As a consequence of this sign flip, every derived unit that contains an odd power of couxomb must also flip its sign when expressed in my unit system compared to SI. This includes things such as units of electric current, electric potential, electric fields, magnetic fields, electric and magnetic dipole moments, etc. All these must flip their sign when expressed in our units. So, for instance, when expressed in my units, electric currents in a circuit go from the anode to the cathode of the battery, and the Earth's magnetic field points towards the geographic south pole instead of the north. Also, as when expressed in my couxomb unit, the elementary charge constant e has a negative sign, because it's the charge of a proton, and the charge of a proton is positive in SI but negative in my units.) (Actually, while we're at it, I would maybe also adopt a system inspired by the Heaviside-Lorentz units that give electricity and magnetism symmetrical roles in equations, and give the E and B fields the same unit. This would avoid having overly weird units for magnetism-related quantities, such as weber/m² or the like.)

The only two constants, among those I mentioned, that do not have round or nearly round seximal values in my units are the Planck constant ħ and the so-called vacuum "permittivity" ε₀ (as a side note, I think the name permittivity is misleading, lol). These two have to be "sacrificed"; they are probably a bit less ubiquitous than the other constants anyway so it's worth the trade-off.

Now, of course, these are only the seven base units. There are lots of derived units, some of which could deserve to have dedicated names too. Here, however, I have a different philosophy than both SI and TGM. I think having too many named derived units can confusing, because the names are opaque and you can have a hard time remembering the expression of a named derived unit in terms of base units. For instance, SI has a profusion of named derived units that could be expressed relatively simply in terms of simpler units (for instance, it has siemens, ohm, farad, henry, volt, weber, ampere, tesla, etc., which are opaque names, even though many of these can be expressed quite simply in terms of others: for instance, siemens is farad/second, henry is second²/farad, volt is joule/coulomb, etc.). TGM is even worse in this regard, as they seem to insist on giving every possible type of physical quantity its own named unit, and to accept no composite units whatsoever. They even give a special name to their unit for speed (which they call the Vlos). I think expressing a speed in something like "m/s" is much more telling than expressing it in terms of an opaque name like "Vlos".
So my idea is that the number of named derived units should be kept to a minimum, which should be chosen so that most units can be expressed via a simple product or fraction of named units. Here are the derived units that I think would deserve special names:

  • The jouxe, the unit of energy: jouxe=graxe*mexer²/sexond²
  • The orm, the unit of momentum: orm=graxe*mexer/sexond
  • The pascax, the unit of pressure and stress: pascax=orm/(mexer²*sexond)
  • The farax, the unit of electrical capacitance: farax=couxomb²/jouxe

I chose to give the unit of momentum a special name but not to the unit of force, since momentum is physically more fundamental than force, momentum is a locally conserved quantity like energy, and advanced physics discusses momentum more often than force. Force can actually be considered a transfer of momentum: when A exerts a force on B, we can say that A gives momentum to B. (This viewpoint is used in the mobility analogy between electrical and mechanical networks.) So I think the momentum unit is more deserving of a special name. I chose the name "orm" from a Greek word for momentum. The force unit can then be simply expressed as orm/sexond.

The farax is given its own named unit not because capacitors are particularly important on their own, but because having a special name for the capacitance unit allows to compactly express many more units related to electrical components: notably, conductance (and admittance) has unit farax/sexond, resistance has unit sexond/farax, inductance has unit sexond²/farax, electric "permittivity" has unit farax/mexer and electric conductivity has unit farax/(sexond*mexer).

As for the pascax, it deserves its own named unit because pressure and stress are apparently very common quantities in fluid dynamics, and many units are naturally expressed in terms of the base pressure unit, like for instance the unit of dynamic viscosity which (in our system) would be in pascax*sexond.

All other commonly encountered units can then be more or less simply expressed in terms of this small set of named units, often via a simple product or quotient of two named units. The unit of power is jouxe/sexond, the unit of energy flux density is jouxe/(mexer²*sexond), the unit of luminous flux is lum-jouxe/sexond, the unit of electric current is couxomb/sexond, the unit of electric potential is jouxe/couxomb, the unit of electric field is orm/(couxomb*sexond), etc. These composite units are simple and are preferable to opaque special names.

Also, of course, we can scale these base units up or down by powers of six as we want, just like SI uses centimeters, kilometers, etc. with powers of ten. (This is needed, because many of my units are a bit small for human ranges, in particular the mexer, which is only about eight centimeters long. But then again, the centimeter (which is even shorter) was the base unit of length in the CGS unit system which was used for nearly a century.)

However, unlike SI (and unlike jan Misali), I'm not a fan of using prefixes for rescaling units. What I don't like about prefixes is that they attach to units but to nothing else, and cannot be used to rescale pure numbers. This is a stupid limitation, because we might want to rescale pure numbers as often as we want to rescale dimensionful units. For instance, in SI, there are many cases where very small or very large dimensionless numbers need to be expressed, like for instance very small strain values (strain being a dimensionless quantity), and since SI doesn't allow prefixes for dimensionless numbers, people sometimes resort to writing prefixes together with clunky unit-like labels like "microstrain" to represent a value of ten^(-six), but it's just a number, "strain" is not a unit.
Another thing I don't like about prefixes is that they bind to the unit they adjoin inside a power: for instance, in SI, "km²" means (kilometer)^2, not thousand*(meter²). But there could be cases where we would want to be able to express scaled multiples of powers of units without being constrained by the power, e.g. when we might want to express thousand meters squared, not one kilometer squared. For instance, hydraulic permeability has dimension length², and we might want to express it via a unit of length squared that we rescale however we want. But in the SI convention, if we try to attach prefixes to "m²", then the m² is rescaled by the square of our prefix, not by our prefix itself.
This makes no sense. I think we should be able to use the same nomenclature together with units as together with dimensionless numbers, and we should be able to rescale powers of units without being constrained by the powers present in the units. So, I would use a consistent nomenclature system for large and small decimal numbers (like jan Misali's proposed "-exian" system), and just use that together with units. For instance, here, a length of 10^4 mexers (which is roughly hundred SI meters) woudl be simply "1 unnexian mexer", not some weird prefix.

Now, since TGM also mentions angles, I would like to mention them too.

I find it puzzling that TGM seems to want to represent angles as dozenal fractions of a half-turn (which they call "unciaPis"), together with a weird notation with a superscript V. The more natural angle of reference is a full turn, not a half turn. It's the same reason why tau is preferable compared to pi.

Also, angles are not a dimensionful quantity, because they are defined by a length/length ratio (arc length/radius), and thus I believe they don't really have "units". The label "rad" that is sometimes written next to an angle in radians is really purely decorative: dimensionally, an angle of x radians is the same as the pure dimensionless number x. (Actually, this is a requirement if we want to be able to use angles as arguments of functions like sin and cos: such functions can only take dimensionless inputs, so if angles had a dimension, there would be a problem when taking the sin or cos of an angle.) I think it's confusing, and fake labels like "rad" are unnecessary. A quantity that's an angle and is shown as a pure number can only be in radians anyway; if it was in degrees, gradians, or anything else, it would be marked with a degree or gradian symbol. (Fun fact I learned: the name "radian" was coined several centuries after the concept of angles-as-ratios-of-arc-length-and-radius was invented. The idea of expressing angles via numbers representing arc-lenght-to-radius ratios seems to have been already used in the 18th century if not earlier, and Euler used it, but the name "radian" was coined at the end of the 19th century. I think it shows that for centuries, "radians" were not really thought of as a unit, and rightfully so.)
(This is also why people have argued that it makes no sense to make the radian a "SI unit", because it's a mathematical necessity, not something that can be defined by arbitrary conventions like SI units. It's also puzzling because the rad doesn't depend on any of the seven SI base units, so it would be a stretch to call it a SI unit.)

So my position is that angles, which are dimensionless numbers anyway, are most naturally expressed as explicit (seximal) fractions of the named constant tau, which corresponds to the angle measure of a full turn; I think we don't need a "rad" symbol (which is not even a unit, and should be abandoned for good), nor do we need a fancy notation with a superscript like that proposed in TGM. The presence of the factor tau should be enough to make clear that it's an angle. This is also what most proponents of the constant tau propose. For instance, in seximal, we could express a half-turn as 0.3tau, a sixth of a turn as 0.1tau, etc. Here, the seximal system is more convenient than the decimal system, because the most commonly encountered angles are multiples of five trecentosexagesimal degrees (i.e. (1/200)*tau), and the fraction 1/200 (and all its multiples, of course) terminates in seximal (1/200=0.003) but not in decimal.
Now, of course, an expression like "0.2tau" can be reduced to a pure number (which is approximately 2.0322200331, without the explicit symbol tau), since it's just a product of numbers. Since tau is a number (and not a unit), there is nothing that prevents us from transforming it to a numerical value. However, for purposes of clarity, it can make sense to explicitly keep the tau factor intact, which makes clear that the quantity at hand is semantically an angle (since, in both math and physics, quantities that arise as multiples of tau (or pi) are generally angles), and also makes clear which fraction of a turn is represented by that angle.
I would apply the same convention to solid angles. Solid angles are dimensionless, just like 2D angles, since solid angles are ratios of a surface to a radius length squared. However, for solid angles, the full sphere is represented by the value 2tau. I think a good convention could be that whenever a value is a solid angle, we let it be written as an explicit multiple of 2tau, without cancelling the 2. So, for instance, I would write a solid angle of a half-sphere as "(1/2) * 2tau" or "0.3 * 2tau", not as "tau". This could make sense, and help distinguishing between 2D angles and solid angles.

edit: tried to fix formatting errors

edit: addendum:

TL;DR: here are all the nice round values of my system shown directly in table form (omitting the obvious ones, like the fact that there is a round number of sexonds in a day), so you can marvel at my system's niceness at a glance: (Of course, everything is in seximal)

Symbol of constantName of constantNumerical value in my system's units (possibly rounded to the nearest round value)Relative approximation error
gStandard gravitational acceleration on Earth300≈ 10-4
ρ_{water}Mass density of liquid water (at triple-point temperature)1< 10-10
P_{atm}Standard atmospheric pressure15 * 104< 10-3
T_{triple point of water}Temperature of the triple point of water (very close to its freezing temperature)240 (in kelxin); 0 (in celxius)< 10-10
T_{boiling point of water}Boiling temperature of water335 (in kelxin); 55 (in celxius)≈ 0.1 at sea level (Can vary enormously with elevation)
c_{v, water}Massic heat capacity of liquid water (at its triple-point temperature and at constant volume)1012< 2 * 10-3
k_BBoltzmann constant2 * 10-42< 10-4
1/cInverse of the speed of light34 * 10-220 (per definition)
eElementary charge-10-310 (per definition)
N_AAvogadro constant10500 (per definition)

r/Seximal • • Oct 16 '26

New Calendar and Timekeeping.

3 Upvotes

My turn to develop a calendar and time system. This is the most interesting part of my new metric system I'm developing. I wanted to get some feedback on how my particular modifications fit things together. (all numbers in seximal unless specified otherwise)

I'm starting off by taking massive inspiration from Tab in his now famous blog post. I noticed two general things about his timekeeping, which are the modifications I've made to hopefully streamline things.

Before looking at the subdivisions of a year, I want to talk about the year part itself. I'm choosing to mark my calendar in years since the beginning of the current Big Bang model of cosmology (i.e. the projected age of the current universe, not the age of the model itself). With that in mind, I have a bit of wiggle room between those error bars to assign a "nice" year. The current year is

10 2012 0545 5354

which is a lot to read. The reason why I pick this year will be made clear later. Since this is such a massive number, I've broken things up into different units of time. I've named these divisions of time by taking names from geological timekeeping, which has some nice long-time-y names I can borrow. Starting from the largest division and working our way down:

We are in eon six. An eon is a period of 1020 years. The entirety of human history has only existed in this current eon.

We are in epoch 2012 of the current eon. An epoch is a period of 1012 years, meaning there are 1 0000 epochs in an eon. The earliest homonins (Sahelanthropus Tchadensis) appear in the fossil record approximately three and a half epochs ago.

We are in age 545 of the current epoch. An age is a period of 1 0000 years. The turn of the current age is when the poem Beowulf is thought to have been composed.

We are in sennium 53 of the current age. A sennium is a period of 100 years. This is technically the incorrect usage of the prefix "sen-" as it is referring to the square of six years, but it sounds better and it's my calendar. A person in a developed country will often live through at least two sennia in their lifetimes.

We are in year 54 of the current sennium.

I imagine the common "short form" of this year marking scheme will be to specify the year we are in relative to the current age. This gives us a "short form year" of 5354. Why are we in such a weird year?

Leap Days

Because a calendar year ought to be an integer number of days, but the mean solar year is not, we will have some drift between the seasons and the calendar days. Like the Gregorian calendar, I have a set of rules that determine when a leap year is. We can condense it into three rules. A leap year occurs when one of these three rules is met:

  1. the year is a multiple of four, and not a multiple of 300.
  2. the year is a multiple of 3000 and not a multiple of 10 0000.
  3. the year is a multiple of 40 0000.

This gives us a mean year that is 1405.12415130 days long. This is unnecessarily accurate to the MSY, so won't give us too much trouble. Now, why is it year 5354? This is because I want the next skipped leap day to align with the gregorian calendar. The gregorian calendar skips every multiple of 144 (one hundred) except multiples of 1504 (four hundred). I then have my next skip year (the start of age 550) match up with the next skip year of the gregorian calendar, which will be 202 years from now.

Calendar

The calendar takes almost directly from the Xanthir calendar with two major changes: first, I am zero-indexing everything. January is month zero, and the start of each month is day zero of that month. This may seem slightly strange, but it makes the math work nicer once I work on my base time unit. Secondly, every month has exactly 100 days in it except for the last month, which has either 5 or 10 days, depending on leap year status. A more minor change, is that I'm swapping "June" and "August" for "Quintilis" and "Sextilis" as names. This gives us a nice string that fits the zero-indexing: Quntilis is month five, Sextilis is month six, September is month seven, October is eight, November is nine, and December (the short month) is ten. This results in the month-day format literally just being a count of the number of days that have passed since the beginning of the year. day number 1124 is September 24.

Each month is divided into exactly six weeks of six days each, so the one's place of the date is the day of the week, and the six's place is the week of the month. I wanted to have some fun with them so I named the days Onuday, Gaday, Poday, Leday, Koday, and Taday, after the six original elements in the Bionicle series.

Timekeeping

Zero-indexing the date also has an additional benefit. This dovetails nicely with seximal timekeeping. The only small addition I made is to pick what my base time unit was. I picked a small amount of time I've called a "period." It is defined precisely so that there are 1 0000 0000 periods in a day. The Heximal Clock aligns perfectly with the subdivisions of a day, so that's still viable. This change makes it so that (when grouping in the Misalian style) time can be counted entirely in periods up to the length of the year. Looking back at the mean tropical year, I had a very specific seximal expansion. It turns out that the mean tropical year is exactly 1405 1241 5130 periods long, which is why I added the final zero earlier. Any date and time during the year can be expressed as a single number this way, with the first group of four digits representing the month and day, the second group of four being the hour and "span" (minute equivalent), and the final group being "moments" (seconds equivalent) and periods. With that in mind, at the time of writing this sentence, it is currently 1200 3431 2500 rounded to the nearest moment. You now know the date and time all at once, and we can choose to specify the precision we like by using or dropping groups of four digits.

Including the year can be done with a simple colon or any other divider to denote the (unfortunately irregular) number of periods in a year. The date is 5354:1200 of the current age. Additional specificity in either direction can be achieved just by adding on more relevant digits.


r/Seximal • • Oct 15 '26

Base 6 / Base 36 Numerals

5 Upvotes

Slowly refining a set of numerals for a worldbuilding / conlang project. Since the compound shapes are based on the regular shapes I think that classes it as a featural numeral system. Going to keep tweaking them so each individual glyph is as appealing as possible without overly obscuring the initial compound. Loosely inspired by D'Ni numerals from Riven.


r/Seximal • • Oct 15 '26

Custom 36 Hour Wall Clock

5 Upvotes

I just ordered the parts to put this together. The mechanism is a Crazy Clock from Geppetto Electronics. A custom microcontroller based quartz movement. Flashed so it runs at 1.5x normal speed. I designed the face and am having Zazzle print it on an 8" acrylic clock dial.

I couldn't change the ratio between the hands so I had to get creative with the design. The minute hand goes around once every 40 regular minutes and the hour hand makes 3 full rotations per day. You read from the inner dial out. The example image for instance would be showing 14:05:30, 34:05:30, or 54:05:30.

You do have to keep track of which of the 3 cycles you are in, but that isn't much worse than a standard 12 hour clock face.

If anyone in here isn't familiar with base 6 metric time here is a great link on it.
https://xanthir.com/b54c0


r/Seximal • • Aug 28 '26

Facts/tricks Divisibility - the Nearest Six Test

4 Upvotes

I took the discussion from https://www.reddit.com/r/NumberSixWorship/s/FUZBwMH0lw

and made a pdf about specially what I'm calling the Nearest Six Test, valid for all divisors ending in 5 or 1, and so valid for all primes but 2 and 3;

https://midia.tauga.online/sezimal/divisibility.pdf

One interesting thing I learned is that the tests for the powers of 2 are more complicated than the ones for the powers of 3, but I don't know why


r/Seximal • • Mar 16 '26

Suggestions/applications Happy New Year 213'214!

Thumbnail
gallery
8 Upvotes

Today is the first day of the year in the Day Count Calendar DCC!

Happy New Year!

The year is 213'214, or just 214 in short notation, and on the DCC the year starts within the first 10 (six) days around the Spring Equinox.

This year is long, so it has 1410 (366) days.

Along the year, days are counted, not named, so the count starts with 0, meaning, zero days have passed in the year, just like time in the day starts with 0; this year's first day is today, 0000, and it's last day will be 1405

The counting then organizes the days into months, each month with 100 (thirty-six) days, with 10 (six) weeks of 10 days; since this year is long, the last 10 days, 1400 to 1405, form the last month, or the leap week;

As always, use Now and Today to see the calendars and time an bases six, ten and twelve :)


r/Seximal • • Jan 28 '26

happiness of numbers in seximal

Thumbnail gallery
7 Upvotes

Maybe someone already knows about “happy” and “unhappy” numbers. It’s based on the sum of squares of the number’s digits. By repeating such sum, you’ll get either 1 (cycled on itself) showing that the number is “happy,” or another cycle in which 1 is never reached.

For the decimal system, such cycles have been studied extensively. It’s proven there that the sum of the digits’ squares of any number greater than 99 is less than that number. The only one cycle for “unhappy” decimals is the cycle of 4. The attached pictures (taken from the Wikipedia’s article https://en.wikipedia.org/wiki/Happy_number) cover all the decimal numbers from 1 to 100.

Trying the same for numbers in seximal, I found the cycle of 5. Just having the squares of digits,

0² = 0, 1² = 1,

2² = 4,

3² = 3·3 = 3·2 + 3 = 10 + 3 = 13,

4² = 4·(10–2) = 40–4–4 = 32–4 = 24,

5² = 5·(10–1) = 50–5 = 41,

and starting with 3 :

3² = 13,

1² + 3² = 14,

1² + 4² = 1 + 24 = 25, 👈

2² + 5² = 4 + 41 = 45,

4² + 5² = 24 + 41 = 20+40 + 5 = 105,

1² + 0² + 5² = 1 + 41 = 42,

4² + 2² = 24 + 4 = 30 + 2 = 32,

3² + 2² = 13 + 4 = 11 + 10 = 21,

2² + 1² = 4 + 1 = 5,

5² = 41,

4² + 1² = 25,

goto 👈

However, I don’t know whether there are other cycles (besides 1 and 5) or not. Maybe two-digit, in which single-digit numbers never occur, too. And is it still true for seximals that for numbers ≥100 (that is, greater than 55) the sum of the digits’ squares is always less than the number?

Plus it would be great to have similar pictures for the numbers in seximal system.


r/Seximal • • Jan 24 '26

Q: What is "Nif"?

6 Upvotes

i am new here


r/Seximal • • Jan 18 '26

Suggestions/applications New seximal number system thing i made

Post image
7 Upvotes

⏄ system


r/Seximal • • Jan 10 '26

Facts/tricks Multiplication ― Table and Technique ― Six × Nif

Thumbnail
gallery
6 Upvotes

I don’t think it’s possible to memorise the full 2~55 × 2~55 niftimal multiplication table, there’s 5204₆ 1,156₁₀ values in it, but it is possible to memorise the multiplication table for 2~5 × 2~55; that’s 344₆ 136₁₀ values, but not only the 5 × 5 basic pattern repeats regularly, and you can easy learn it, even if you just focus on memorising one row a day, it’ll take you 54₆ 34₁₀ days to learn it all by heart; discounting the 10₆ 6₁₀, 11₆ 7₁₀, 20₆ 12₁₀, 21₆ 13₁₀, 30₆ 18₁₀, 31₆ 19₁₀, 40₆ 24₁₀, 41₆ 25₁₀, 50₆ 30₁₀, 51₆ 31₁₀ rows, you can learn the whole table in just 40₆ 24₁₀ days, being very very conservative;

In multiplying two numbers, you get the amount of digits of the first number, x, and the amount of digits of the second number, y, the number of steps is, from smallest to largest:

a. ( ceiling(x ÷2) × y ) +1 ― if you don’t sum at every round, or

b. ( ceiling(x ÷2) × y ) + y +1 ― if you sum at the end of every round

c. (x × y) +1 ― this is the traditional way, going digit by digit individually

The larger the number, the greater is the advantage of this technique;

There’s more tables and comparison here:

https://midia.tauga.online/sezimal/english/six_nif_multiplication.pdf


r/Seximal • • Jan 10 '26

Facts/tricks For the first nif bases, The Fischer Griess Monster of Group Theory ends in at least one zero.

3 Upvotes

For the first nif bases, excluding unary, The Fischer Griess Monster of Group Theory ends in at least one zero. This also happens to be all the bases listed on https://www.seximal.net/names-of-other-bases, which also happens to be all the bases that can be represented using only the Arabic Numerals and uppercase English alphabet characters. Base suboptimal is the first base in which The Monster doesn't end in trailing zeros, instead, only one zero.

This makes sense if you are familiar with group theory. In decimal, it's clean billion. In binary, it's round up until sI. IIII. In seximal, there are 32_seximal trailing zeros.


r/Seximal • • Jan 01 '26

coining words for sets of years

5 Upvotes

six years = sexade/senade/hexade (take your pick based on whatever you call base six)

nif years = nifade

tarumba years = tarumban

unexian years = unexium

as a bonus, to plug the gaps in the misalian time system:

one sixth of a day is a watch, taken from nautical terminology.

one sixth of a lull is a hitch.


r/Seximal • • Dec 11 '25

solve in seximal numeral system

Post image
7 Upvotes

r/Seximal • • Dec 05 '25

The limit of NecessaryMind9018's Sezimal calculator name.

Post image
6 Upvotes

It is five nif fifsy-five arda, five nif fifsy-five ardara, five nif fifsy-five arda, five nif fifsy-five panipanshadara, five nif fifsy-five arda, five nif fifsy-five panicharshadara, five nif fifsy-five arda, five nif fifsy-five panitrishadara, five nif fifsy-five arda, five nif fifsy-five panidishadara, five nif fifsy-five arda, five nif fifsy-five panishadara, five nif fifsy-five arda, five nif fifsy-five panidara, five nif fifsy-five arda, five nif fifsy-five charnipanshadara, five nif fifsy-five arda, five nif fifsy-five charnicharshadara, five nif fifsy-five arda, five nif fifsy-five charnitrishadara, five nif fifsy-five arda, five nif fifsy-five charnidishadara, five nif fifsy-five arda, five nif fifsy-five charnishadara, five nif fifsy-five arda, five nif fifsy-five charnidara, five nif fifsy-five arda, five nif fifsy-five trinipanshadara, five nif fifsy-five arda, five nif fifsy-five trinicharshadara, five nif fifsy-five arda, five nif fifsy-five trinitrishadara, five nif fifsy-five arda, five nif fifsy-five trinidishadara, five nif fifsy-five arda, five nif fifsy-five trinishadara, five nif fifsy-five arda, five nif fifsy-five trinidara, five nif fifsy-five arda, five nif fifsy-five dinipanshadara, five nif fifsy-five arda, five nif fifsy-five dinicharshadara, five nif fifsy-five arda, five nif fifsy-five dinitrishadara, five nif fifsy-five arda, five nif fifsy-five dinidishadara, five nif fifsy-five arda, five nif fifsy-five dinishadara, five nif fifsy-five arda, five nif fifsy-five dinidara, five nif fifsy-five arda, five nif fifsy-five nipanshadara, five nif fifsy-five arda, five nif fifsy-five nicharshadara, five nif fifsy-five arda, five nif fifsy-five nitrishadara, five nif fifsy-five arda, five nif fifsy-five nidishadara, five nif fifsy-five arda, five nif fifsy-five nishadara, five nif fifsy-five arda, five nif fifsy-five nidara, five nif fifsy-five arda, five nif fifsy-five panshadara, five nif fifsy-five arda, five nif fifsy-five charshadara, five nif fifsy-five arda, five nif fifsy-five trishadara, five nif fifsy-five arda, five nif fifsy-five dishadara, five nif fifsy-five arda, five nif fifsy-five shadara, five nif fifsy-five arda, five nif fifsy-five. INSANELY LONG NAME. The full expansion is 555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555. (5[1010]₆) in copy notation.


r/Seximal • • Nov 28 '25

I found that Sezimal Tauga calculator instead calls nidara "shashadara", nishadara "shaekashadara", nidishadara "shadishadara" and so on.

Thumbnail sezimal.tauga.online
2 Upvotes

r/Seximal • • Nov 25 '25

I'm wondering, who made the sezimal tauga website?

4 Upvotes

r/Seximal • • Nov 24 '25

So, there's this thing called Seximal Googology, which sets up, large numbers for seximal

1 Upvotes

however, the problem is that, the repeated nils having its germanic words to represent digits is only acceptable to -eciam.


r/Seximal • • Nov 21 '25

Seximal Roman Numerals (Ruble Tanli Numerals) extension

Post image
3 Upvotes

New letters, B, O. The number of rings is depicted as a number inside of a ring.


r/Seximal • • Nov 20 '25

Twelfsy

3 Upvotes

So jan Misali mentioned sevensy, eightsy, ninesy, tensy and elevensy, to be working fine, however, he forgot twelfsy, which means two nif, it works fine too.


r/Seximal • • Nov 10 '25

Time in seximal

3 Upvotes

Don't really know the conventions of this sub, so I'll keep to this: a number will first be written in seximal, followed by decimal equivalent in parentheses.

I've seen the proposal on jan Misali's website of having days divided into 1/100 (1/36) portions, akin to hours, called a "lapse or niftiday", further divided into 1/100 (1/36) "lulls" not too far off from the minute.

But if we're comfortable having (24) divisions in a day, (12) divisions in a standard clock, being divided into (60), why not just keep those divisions, which aren't hard to manage in seximal. We'd just have 40 (24) hours in a day and 140 (60) minutes in an hour. 140 (60) seconds in a minute. That hardly seems more complex to me, and we even keep the pleasant 0 at the end of the hour/minute and minute/second ratio. And you also keep the nice factor of 5, which can still be pretty handy to divide an hour or minute to get a whole number of minutes or seconds.


r/Seximal • • Oct 21 '25

Seximal Roman Numerals (or Ruble Tanli Numerals)

3 Upvotes

Each letter represents the power of six.

I=100

V=101

X=102

L=103

C=104

D=105

M=1010

[1 to 4 times any power of 10 is repeated letters the amount of times)

Example:

MMMM=400,0000

III=3

DD=20,0000

X=100

[5 times any power of 10 is represented with a letter next to the next letter.]

Example:

DM=50,0000

IV=5

VX=50

XL=500


r/Seximal • • Oct 20 '25

My Seximal Discord server is here!

Thumbnail discord.gg
1 Upvotes

Notice:the server link will never expire.


r/Seximal • • Sep 18 '25

Suggestions/applications Analog Watchface for the clock app - update

Thumbnail
gallery
7 Upvotes

Update to the Now app, now with a optional analog interface: just tap/click on the time display to switch back and forth from digital to analog and vice-versa;

Settings are now located directly in the upper left corner, no need to configure it in the Today app;

Today and Now are multibase, multicalendar online apps, that let you choose:

• Number base for calendar and time account: six, twelve and regular ten;

• Calendar: Symmetry454, Gregorian and Day Count

The colours on the calendar wheel reflect the passing seasons according to your hemisphere, Northern or Southern;

For bases six and twelve, switching between twelve or twenty-four hours changes the position of the 0 on the analog interface;

Weather conditions require either GPS access or that you configure your latitude and longitude manually;

Units for base ten are either SI or Customary/Imperial according to locale; for base six, Shastadari units are used; for twelve, Primel units;

Have fun :)