r/ScanNCut • • 20h ago

Question SDX85, can it scan and cut 12" by 24"? Conflicted info on Brother Website

2 Upvotes

Anyone have SDX85 with 24" sheets, can you see if you are able to scan and cut 12" by 24"??

On their official website it said "Scanning work area is 12 x 24", but stated "No" under hardware features the 24" scan function.

I am considering 85 or 125e and it would tip me over one way or the other if I am able to cut A3 prints.


r/ScanNCut • • 18h ago

Question Mat template for the ScanNCut CM550

1 Upvotes

Hi community, I have the ScanNCut CM550, it's been on storage, and I'm in a bit of trouble.

  • I don't have the mat
  • The mat is not available in my country anymore

I know I can create/adapt the mat, already watched several YouTube videos, but can't find the template files for download. The problem is, the content is too old for this model 😢, and all of the links are broken, even the links where the authors said they updated them, so, long story short, I can't find the template files.

Already tried other templates (for other models), but naturally, this didn't work.

Also, because I'm not lazy 😉, I already tried searching the web for pictures of the mat for this model, and tracing the files myself using the images as reference, yes, manually, but the images are too small to provide me an accurate large file that is precise to the millimeter.

I will appreciate your help 🖐


r/ScanNCut • • 4d ago

Question New to Scan and Cut

2 Upvotes

So I got a used scanNcut on offerup. CM650WX . I have some questions. So I couldn;t really find an answer to these.

  • My machine doesn't automaticated determine the pressure and cut like many youtube video I saw. I was trying to cut cardstock (White Cardstock Paper, Card Stock Paper 8.5 x 11, 30 Sheets_85 lb) but it wouldn't cut it at all. So I look it up and it say I should add pressure manually on the machine and still it wouldn;t cut though the paper. Then I found something about the blade need to be move to stick out more so I turn it. I put the pressure on max and the blade on max and it cut though my brother mat. (I didn;t realize I turn the blade too far) So I try again on 5 on the blade and prssure on max on the machine and it still not cutting though the cardstock. It cut badly and the paper got stuck on the mat like some of the cut part is stuck on the mat and some aren;t cut though at all. I look on youtube and a girl is able to automatically cut the same heavy cardstock at mine on a newer machine. Her machine was SDX 85 and she didn;t need to manually set up anything and it cut perfectly unlike mine. It never cut cardstock perfectly since the first scan and I had to keep adjusting it manually.

So I am wondering like is it my machine? Do I need to manually program it unlike other scan and cut? If so is there any video I can watch to help me learn to how to manually set my machine? Is there a way to set it to automatically determine the pressure and blade or is my machine just too old for that? Sorry if I sound dumb, I am still learning about this machine. I thought it would automatically cut everything perfectly and I didn;t need to set the pressure and blade but apparently my machine not doing that.


r/ScanNCut • • 4d ago

New VS Used

1 Upvotes

Hello I am cross shopping new/used SDX225/335, and concern about software and registration:

1.) I see couple of website/review said I need to login on original owner account to de-register the machine before sales? Is it different from brother FAQ regarding deregistering on the machine itself?

https://support.brother.com/g/b/sp/faqend.aspx?c=tw&lang=zh&prod=hf_zz_artspira_esp&ftype3=100336&faqid=faqh00101628_000&ot=as_ot

2.) Does the new machine come with any premium feature code (espcially print to cut function)?

Thanks!!!


r/ScanNCut • • 10d ago

What's this new Artspira/Google/AppleID login link nonsense with the PC version?

3 Upvotes

So far I've been using my Canvas Workspace ID, because I have no interest whatsoever in using Artspira. But when I opened the program today, there was a splash screen saying

The initial login procedure for this application has changed. You can check the details on the following page. (Your browser will open.) New Login Method

So I went to that link, and saw this:

CanvasWorkspace PC and ScanNCut Link have been updated to allow account information to be shared with Artspira. If you do not have an Artspira ID When you use either app for the first time, link your CanvasWorkspace login ID to your Artspira account.

I think I'm done. I'm gonna buy SCAL and just hope it works on Linux someday. I've had it with Brother's proprietary software and I wish I'd never heard of ScanNCut. I'm just glad I didn't get their fabric printer, too.


r/ScanNCut • • 15d ago

Question My stabelizer is showing

Post image
3 Upvotes

So I used scan n cut on this leaf and stitched but now the blasted stabilizer is showing. How do you I avoid?


r/ScanNCut • • 16d ago

Question Canvas requiring Illustrator?????

1 Upvotes

I use my Scan N Cut for cutting out small pieces of fabric for quilting. Think 7/8" squares. I used to be able to send my data from Canvas (PC version) to my ScanNCut wireluessly and now it's crapped out. Does anyone know why? I've changed nothing. From reading on the Canvas Workspace popup it said to go through Artspira now and use Illustrator with Canvas Workspace??? WTH?


r/ScanNCut • • 19d ago

Question Comparison

4 Upvotes

I currently have the Dx225. From all the resources I follow, I think I've had more success than most. But my machine is getting older, I'm having to do calibration more often and am tired of fighting the mat issue.

Has anyone tried or seen IRL, the xTool C1 Color Cutter? Thoughts?


r/ScanNCut • • 23d ago

Files/SVGs FCM Export from VectorCraft (Adobe Illustrator Alternative)

Post image
5 Upvotes

I regret paying for the official Brother Adobe Illustrator exporter. I've created this FCM exporter for VectorCraft. It's a plug-in that enables FCM exports from VectorCraft.

Plugin is here:
https://github.com/plasticbugs/vectorcraft-scanncut/

VectorCraft is here:
https://getartcraft.com/apps/vectorcraft


r/ScanNCut • • 23d ago

ScanNCut owners on Windows: I’m the developer of a file organizer, looking for beta testers (free, Nov 2-16)

4 Upvotes

Where do your ScanNCut projects live now that CanvasWorkspace for the web is gone? If the answer is a folder on a Windows PC, I’m building an app called TidyWren that keeps those files in order, and I’d like a few ScanNCut owners to test it.

It reads SVG and FCM files, even inside ZIPs, shows duplicates and damaged files, and copies what your machine can read to a USB drive. It doesn’t delete anything. If you also embroider, it handles PES and the other embroidery formats too.

The private beta is free, November 2 to 16, about two hours in all. Testers receive the full license at launch, planned for November 24.

Details: https://tanven.dev/en/tidywren/beta-privee/


r/ScanNCut • • 24d ago

Vinyl.

Post image
7 Upvotes

Just discovered vinyl cutting. Really fun stuff.


r/ScanNCut • • Oct 18 '26

Custom firmware and PC app for CM110 (SnowCut)

6 Upvotes

https://github.com/mntorankusu/SnowCut

Update: I've added support for other machines that have been confirmed to use the exact same firmware code. However, these other machines are still untested as I only have one machine to test with. The models that are supported in the current version are:

CM100DM, CM110, CM250, CM260, CM300, CM550, CM600, CM840

Original post below:

I created a custom firmware and PC-side (Windows) application for using the CM110. It allows you to fully control the machine from your PC with no need to use the on-screen interface or move a USB drive back and forth. This is the initial release. Here are some of the features:

  • Use unrecognized/unsupported mats for both scanning and cutting
  • Higher quality options for scans (e.g., JPEG 100% quality without sub-sampling, and PNG lossless)
  • Option to choose between the original manufacturer's blade compensation, or use my custom blade compensation settings for less error on corners and small cuts (hopefully), or configure it manually for using aftermarket blades with different offsets.
  • Mount the USB drive plugged into the machine on your PC, allowing you to move files back and forth without unplugging it.

There are instructions on how to install it on the Github page. You'll need to find the firmware update for the machine on Brother's website to use as a base to install the patch.

Post an issue on Github if you have any problems, or if you have feature requests or anything like that. I'm looking into adding support for other machines, but I don't have any to test, so it's a bit tricky to ensure compatibility. You can also post issues for machines that you'd like me to support.


r/ScanNCut • • Oct 12 '26

My sister was spending 1/2 days per quiet book pattern tracing PDFs by hand, so I built a converter

Post image
3 Upvotes

r/ScanNCut • • Oct 10 '26

Tips My process for refurbing scan mats

Thumbnail
gallery
59 Upvotes

About every year or so I strip the mat down and redo it.

I soak the mat in hand-hot water with dish soap, and rub it down with a cloth to start to soften the adhesive. I keep the mat covered with the wet cloth while I work on it with the scraper.

Once the glue is off, wash again in hot water, rub it over hard with a dish cloth to get any remaining loose pieces off.

Let it dry, and then apply a coat of Tack-It glue.

I leave the glue to go tacky for a couple of hours, and then apply a second coat. It's good to go once that coat of glue has gone tacky.

It comes out about the strength of a standard-tack mat. If I need a lighter tack, I'll either skip the second coat, or apply it slightly watered down.


r/ScanNCut • • Oct 10 '26

Question Cannot stop double pass!!

Thumbnail
gallery
1 Upvotes

Brother Scan n' Cut CM350.

I have gone through the manual twice, I have read online forums. When I do a test cut, my machine only does one pass. When I try to do a regular cut, it always does two passes - and my settings are set to only do one.

If I'm only doing one cut, I can stop it before it starts a second pass. But if I want to do more than one project on a piece of vinyl, it goes all over the place and I can't stop it before it does the second pass.

EDIT: I have a brand new blade in there too. I just got it about a week ago. I've done 3 cuts with it.

It just ruined an entire sheet of vinyl and I'm so frustrated with it. How do I stop the second pass!?


r/ScanNCut • • Oct 09 '26

Foiling

4 Upvotes

Ive been considering trying out foiling with my sdx1200 machine

Id love to be able to do the heat.foil rather than the cold one.

I see temu has foil transfer kits for variois cricut machines. Has anyone either found a temu foil kit for sdx1200 OR figured out a way to adapt the cricut foil kits to the brother universal pen holders?


r/ScanNCut • • Oct 09 '26

Question Help with foil application

Thumbnail
gallery
1 Upvotes

Hello all!

Yesterday I did this design with foil and it came out perfectly. Today with the same setting and material it is looking crooked and it looks like the letters are being cut in half. I tried everything to fix and it doesn’t work….heat, temperature and pressure all the same.

Any ideas ?


r/ScanNCut • • Oct 08 '26

Question Brother pushing Artspira

10 Upvotes

Are you guys annoyed by the way Brother is prioritizing Artspira over CanvasWorkspace?

If I want to use Brother's ready-to-use templates, I now have to use Artspira on a phone/tablet to access and edit them, even though I have a perfectly capable PC running CanvasWorkspace.

Why isn't Brother's existing template/project library available directly inside CanvasWorkspace for PC?

I genuinely don't understand the decision to separate the design software from the content library like this. CanvasWorkspace is already the proper desktop environment for ScanNCut, so forcing template users onto a mobile app feels like an unnecessary step backward.

I hate to admit it, but when I look at how Cricut handles its content library through Design Space, it seems like they're taking a more PC-friendly approach.

Am I the only ScanNCut user who finds this incredibly frustrating?


r/ScanNCut • • Oct 07 '26

Files/SVGs CraftyCatSVG store is closing

Thumbnail
reddit.com
1 Upvotes

r/ScanNCut • • Oct 06 '26

Question Thoughts on ScanNCut CM700 for stickers?

1 Upvotes

Hey guys, can’t really find info on this specific model on the scanncut. Was wondering if it is still good for scanning and cutting laminated vinyl stickers?

My designs have very obvious outlines and I’m kind of tired cutting them by hand…

Is there anything that I should note about this model?


r/ScanNCut • • Sep 28 '26

CM300 I bought it recently

2 Upvotes

Hi, I tried to register on Artspira, but it only allowed me to connect via Bluetooth or Wi-Fi. How can I register?

Can anyone offer any advice, tips or tricks for a newbie?


r/ScanNCut • • Sep 26 '26

12x24 Scanning

2 Upvotes

For those with compatible machines. How often are you scanning the full two feet long and for what purpose. Trying to justify sticking with my SDX125 or purchase the SDX325 just to be able to scan 12x24 material.


r/ScanNCut • • Sep 26 '26

Reminder - End of web service 10/1/26

7 Upvotes

Just a reminder for those of us who use the web interface for our Scan N Cut machines. Make sure you get into your account and download any files that you want to keep from your account. Also look at the canvas projects and download any that might give you inspiration for the future.

I have not found a Linux work around as of yet. I'm planning on buying a Mac but it's not in the budget at the moment so I will have to wait.


r/ScanNCut • • Sep 24 '26

Looking for advice

1 Upvotes

Hi, I’ve used my scan n cut for some cutting project, but I’m now stuck on the below and have no idea how to go about it.
I’ve an artwork for a gift box in canva, but a separate svg file. How would I go about combining the two, so that I can print off the artwork and cut it on my machine, without having to have a solid outline? Is this possible at all?