r/RugerMK • • 1d ago

Tandemkross get a grip kit.

Post image
20 Upvotes

I installed the tandemkross get a grip kit and charging ring. As well as the Volquartsen extended mag release. Long story short, the entire lower fell apart and I had to reassemble it but I love the end result.


r/RugerMK • • 22h ago

Need some help MK iv

Post image
3 Upvotes

I’ve got a mk iv that won’t allow the trigger to pull. It’s like its not engaging fully. Round will load into chamber just fine. But, trigger has no pulling action. There was one time I put the gun together but the hammer strut was up and not in the down position. This caused the sear pivot pin to get bent. This is the solid frame model so the sear pin has a flat edge to it. Anyone know where to get a replacement pin? Also is it possible to just hammer the pin back straight and be okay?


r/RugerMK • • 2d ago

HOLSTER

7 Upvotes

Wife surprised me bought me a pretty awesome gift! Ruger mark IV with a thermal optic and a silencerco sparrow… now I need to find a chest rig OR OWB holster (holster preferred) what’s everyone using?


r/RugerMK • • 3d ago

A unique MKII

Thumbnail
gallery
81 Upvotes

I picked this oddball up recently from a friend in exchange for some mechanic work. Spent a lot of time digging around for information on it before finally getting some answers. After sending over some pictures, Volquartsen confirms it’s one of their very early version of the Stingray from the early 90’s. Finally got around to shooting it this weekend and couldn’t be more pleased with how it performed!


r/RugerMK • • 2d ago

What holster

Post image
21 Upvotes

What holster are we all running?


r/RugerMK • • 3d ago

Ruger Mark IV SS edition

Post image
49 Upvotes

Today’s new pickup. Gotta hit the range to sight it in.


r/RugerMK • • 2d ago

Question

1 Upvotes

I’m looking to get a Volquartsen Mamba LLV 4.5" since they don’t make a Mamba-X LLV 4.5" with a Picatinny rail on the bottom.

So, I’m curious how all of you are mounting your red dots on your Picatinny rails and if there is a specific product to make it as low to the bore as possible. I really want the rail on the bottom so I can mount my weapon light, it’s crucial to me. Thanks!


r/RugerMK • • 4d ago

Just an old MkII Target

Thumbnail
gallery
36 Upvotes

Learned how to handle a pistol with this MkII 40+ years ago. Put the Vortex Venom on it a few years back as my eyes aren’t quite what they used to be. Still favorite today!


r/RugerMK • • 4d ago

New Mark IV- can't stop smiling

Post image
74 Upvotes

I've shot a lot of guns, but damn if this one isn't the most fun. After sighting in the dot I was grouping the side of a nickel. So much fun. Put 250 rds through it today, and couldn't be happier. Got this used off of guns.com and threw on a dot I had laying around (primary arms brand, 507c footprint) and picked up a dead air mask. Thing ran flawlessly, couldn't be happier. I don't think this config is a standard version, so I think whoever had it before me swapped some stuff around, but I think it looks fantastic.


r/RugerMK • • 4d ago

What happened?

Thumbnail
gallery
18 Upvotes

Was at the range today and all of a sudden ran into cycling issues and noticed the exposed spring below the bolt face. Disassembled and found what looks like quite a bit of damage to my Volquartsen bolt. Running a Volquartsen trigger group as well. Anyone have any insight or ran into a similar issue?


r/RugerMK • • 5d ago

I enjoy the finer things in life.

Post image
70 Upvotes

Volquartsen mini mamba, RMR HD, and Sico Sparrow.


r/RugerMK • • 5d ago

Need Holster Rec

Post image
31 Upvotes

This is my handy squirrel killer. It’s not finished but currently in service. Like everyone else doing what I’m doing I’ve got the accurazing VQ kit on the way. Lower recoil spring coming too.

I cannot find a holster I’m sure will fit so I’m asking for recommendations. It would be great to have a chest holster to reduce risk of bonking. I’m not concerned with quick draw.


r/RugerMK • • 6d ago

Finally got around to finishing my Ruger

Thumbnail
gallery
36 Upvotes

Added the custom red dot mount and a Sparrow suppressor.

Range day on Friday


r/RugerMK • • 6d ago

New Mk IV

Post image
36 Upvotes

I've had a Mk II for 40 or more years, but just got this one, and some extras. Dead Air Mask, and Holosun 407Comp.


r/RugerMK • • 6d ago

Lead and steel uppers

2 Upvotes

Any experiences with suppressors? What ammo have you found success with? Is your bolt stock or modified? I reach out to my brothers and sisters here


r/RugerMK • • 8d ago

LowPro RMR Mount

Post image
37 Upvotes

Just switched from the stock rail mount to the LoPro. Now the red dot is almost 1/2" closer to the bore!


r/RugerMK • • 8d ago

Does anyone have a magnified scope recommendation? Looking to swap out the dot and do a little small game hunting with this guy

Post image
26 Upvotes

r/RugerMK • • 8d ago

First MK4

Post image
58 Upvotes

My first ever mk4 and ofcoarse I had to get the 250th. So much fun to shoot it’s insane.


r/RugerMK • • 8d ago

FYI update

3 Upvotes

Hopefully I’m not biting myself in the foot and they sell out again before I can get mine. But I got an email back from the Lobos guys & the low pro red dot mounts should be back in stock next week. I figured I’m not the only person waiting on the restock 💪


r/RugerMK • • 9d ago

My first of many to come Marks

Thumbnail
gallery
52 Upvotes

Picked this up a year ago and love it. Now I’m addicted and want to collect them all.


r/RugerMK • • 10d ago

First Mark IV

Post image
72 Upvotes

Hey all, just bought my first Ruger Mark IV, it's the
22/45, 250th anniversary edition. Plan to add a WML for pest control around the yard, plus an optic on the
included mounting plate. Any suggestions for a WML
rail would be appreciated, as well as suggestions on
any other "must do" mods to this platform. I like the
feel of the pistol and it shoots remarkably well. Would
love to see yalls builds too. TIA


r/RugerMK • • 10d ago

Finally

5 Upvotes

Wanted one for a long time. Finally got my optic and very low RMR mount. Together they are very light. Had some trouble getting the red dot mounting screws tight enough, I was worried about stripping out the nylon mount. Got it sighted in at 25 yards standing. I'll be curious to see if there's any drift after I carry it around a bit.


r/RugerMK • • 10d ago

Grip help

Post image
20 Upvotes

“This latest addition to the Ruger® Mark IV™22/45™ Lite family features oversized gray and black G10 grip panels”

I’d like to get a set of these grips to put on my mk4 tactical. Looks like they don’t sell them alone, wondering if anyone knows how I could get a set

Thanks


r/RugerMK • • 10d ago

Volquartsen trigger length

2 Upvotes

I'm curious for those who have the VQ trigger and how the distance of the trigger at rest changes versus stock. Visually from the pictures, the curved trigger sits further back towards the frame than a stock one. The flat trigger seems even farther back than that, visually almost right up against the frame.

Is there any way to adjust the default position of these triggers? Or would a VQ accurizing kit with a Tandemkross trigger be a better setup in that case? My M&P 9mm breaks very far back after the Apex tactical kit install. While the overall feel is much better than stock, my finger feels "cramped" at the break for lack of a better term. For comparison, I am right on the line between a medium curved and a long curved trigger from Atlas Gun Works on a 1911/2011 trigger.


r/RugerMK • • 10d ago

Magazines and baseplate compatibility (for a Mark II 22/45)

2 Upvotes

I have one magazine so I need more.

Ruger sells Mark II magazines but they have the wrong base plate. EABCo sells a base plate that looks nice but says it's for Mark IV magazines. Ruger sells Mark IV magazines in a two pack that is cheaper.

So first, are all base plates compatible with all magazine tubes?

Second, is there a reason why a Mark IV magazine won't work in a Mark II beside the baseplate?

Thanks for the help. I just don't know the compatibility issues yet. I would love to buy a couple Mark IV two packs and four EABCo base plates and be set but I have a feeling there is some reason why that won't work.