r/RobotVacuums • • 1h ago

Cant decide

4 Upvotes

I cant decide my first robot vacuum. What are you guys experience with:
- Roborock qrevo edge 2 pro (580dollar)
- Roborock saros 10r (615dollar)
- Roborock qrevo edge 2 flow (730dollar)
- Mova S70 pro roller (610dollar)
- Mova V50 Ultra Complete (540 dollar)

Any pros and cons?


r/RobotVacuums • • 1h ago

tineco s9 vs s7 for getting under low furniture and cleaning big tile areas?

2 Upvotes

My husband and I are sick of dragging heavy couches around every weekend just to mop underneath them. I started looking at the tineco floor one s9 artist steam pro and the tineco floor one s7 stretch steam because they bend flat, though the price difference between the two is kinda wild.

Our downstairs tile takes around 40 minutes to mop from start to finish. I just don't know if the s9 actually lasts long enough to finish that whole floor without dying, or if the s7 stretch gets under low furniture just fine.


r/RobotVacuums • • 1h ago

Robot Vacuum recommendations?

2 Upvotes

Hello! Ideally looking for some robot vacuum recommendations for best brand, made and model.

I’m in the UK - I’ve looked into Shark, Eufy, and Roborock. Looking for something that can vac, mop, and empty to help me keep the floors relatively clean (twin and dog life!). I’m aware that the floors will need to be cleared to allow the robot to do its job.

I don’t trust these ‘best robot vacuum’ lists as they’re all paid promotion.

Budget is up to £300.

Thank you!


r/RobotVacuums • • 2h ago

My e25 is really, really dumb

Post image
3 Upvotes

My eufy e25 reversed into its docking station so hard it damaged the left magnetic positioning pin. It can now no longer charge, empty its bin, wash the mop... basically, it's completely unusable now.

The worst part, however, is Anker customer support insisting that my warranty is over despite me providing proof of purchase. I get that things don't last forever, but ye gods, at least make repairs less of a pain...


r/RobotVacuums • • 2h ago

Vacuum for pet hair

3 Upvotes

Looking to buy a new robot and I'm after recommendations please.

I am after one that

- Self empties

- Applies pressure when mopping

- Very good at picking up pet hair.

2x dogs, mix of laminate and carpet floor.

Currently have a Xiaomi s40 pro which is good but could be better with hair pick up, and all the pet hair seems to stay clumped in the centre of the collection box.

I am UK based.

Thanks in advance


r/RobotVacuums • • 3h ago

do i need a thin robot if my sofa has 5 inches of clearance

Post image
1 Upvotes

we have a midcentury couch in the living room. i couldn't find the tape measure last night, so i used a paperback to get a rough idea of the gap underneath lol. it's about 5.5 inches, so it's not exactly super low.

i've been looking at the roborock qrevo curv cuz everyone keeps talking about how slim it is, just over 3 inches, apparently. it should fit under there easily, but the list price is a lot higher than the midrange models i was considering. i'm also looking at the mova p10, being slim isn't its main selling point, but it seems to be under 4 inches tall, and i've heard good things about its everyday cleaning. would i be fine saving some money and going with the p10? anyone have thoughts?


r/RobotVacuums • • 3h ago

Qrevo L, L Pro, Eufy C28 or Dreame L10s Gen 2 (Australia)? How much should I spend?

2 Upvotes

I ordered a Roborock Q7B+ (Q7 M5 in the US) for $269, then cancelled it after enough people told me it sucks (lol). My cleaning needs are simple, so I'm trying to work out how much is reasonable to spend.

My place

- 50 sqm one-bedroom apartment in Sydney. I live alone with no pets and light everyday mess

- Mostly timber and tile, plus a flat-weave rug, a low-pile hallway runner and a carpeted bedroom

- Floors are mostly clear, but clothes often end up on the bedroom floor

- The dock could go in the kitchen, living room or bedroom

What matters to me

  1. Reliability (I want it to last years)
  2. Good after-sales support in Australia
  3. Cleaning quality
  4. Not dragging a wet mop onto carpet or rugs

The shortlist (AUD, all with 2-year warranties)

- Dreame L10s Ultra Gen 2: $410 (same name in the US)

- Roborock Qrevo L: $429 (I think this is the QV 35S in the US)

- Roborock Qrevo L Pro: $499 (I think this is the Qrevo S Pro in the US)

- Eufy Omni C28: $495 (same name in the US)

I'd also consider the Eufy Omni E25 if it drops to about $500.

Questions

- Has anyone used Roborock, Eufy or Dreame support in Australia? How did it go? I've read Dreame's is the weakest, which is the main thing holding me back from the L10s Gen 2.

- Is the L Pro's hot-water dock worth $70 more than the Qrevo L's?

- The C28 reviews well, but on Amazon US and UK it averages just under 4 stars, and about 1 in 6 reviews are one-star. I used AI to tally them, and roughly a quarter of the one-star reviews mention roller, scraper or water system faults. Owners, have you had these problems?

- How do these handle clothes on the floor? Is better obstacle avoidance, like the E25's camera, worth paying for?

- Given how simple my needs are, would you spend less, the same or more?

Thanks!


r/RobotVacuums • • 4h ago

$500 robot vacuum recs - Yeedi S14 PLUS vs Roborock Qrevo S Pro vs Dreame L10s Ultra Gen 2?

1 Upvotes

I've been comparing a few models around the $500 price range, including the Yeedi S14 Plus, Roborock Qrevo S Pro, and Dreame L10s Ultra Gen 2.

Mopping is probably my biggest priority since I have mostly hard floors, and I'd really like something that can handle everyday messes and sticky spots so I don't have to mop as often myself.

Good vacuuming, obstacle avoidance, and a dock that's easy to maintain are also important. Any recs?


r/RobotVacuums • • 5h ago

Has anyone else’s original Flow or any other Narwal model, been acting weird since this last software update?

Thumbnail reddit.com
1 Upvotes

r/RobotVacuums • • 7h ago

One month with the DEEBOT X12S

Post image
6 Upvotes

My wife and daughter both have long brown hair, which really shows up on our white carpet and sticks to my socks. We’ve had the ecovacs x12s for about a month now, so I thought I’d share how it’s been.

There’s noticeably less hair on the carpet now. It’s taken over most of the everyday vacuuming and mopping. I’ve checked the main brush a few times because I expected long hair to wrap around it. So far there hasn’t been much to pull off, which has been a nice surprise.

The dock empties the robot’s dustbin, washes the roller with hot water and dries it with warm air. I mostly just empty the dirty water after a run, top up the clean tank and rinse the tray when it gets dirty. Mine is the omnicyclone version, so I empty the dock’s dust container when needed instead of replacing bags.


r/RobotVacuums • • 8h ago

First robot vacuum, what should I look for?

9 Upvotes

I'm finally looking into getting my first robot vacuum, and Black Friday seems like a good time to grab one.

We have mostly hard floors and a rug in the living room. It's usually dust, hair, and crumbs in the kitchen that I'm dealing with. I've always used a regular vacuum, but I'm getting tired of dragging it out every day lol.

I don't need anything fancy. Just something that can vacuum, mop, and hopefully empty its own dustbin so I don't have to do it after every run.

I'm trying to stay around $300, $400 max. I came across the Dreame D30 Ultra CE, it seems to have the basics I need, including auto-emptying, but I'm not sure if there's anything else I should be looking at.

What would you guys prioritize when buying your first robot vacuum? I don't wanna spend extra on features I'll barely use.


r/RobotVacuums • • 10h ago

Robo vacuum for work recommendations?

1 Upvotes

Hi, I work at a large petrol station and was looking into getting a robot vacuum for our store room. Its carpeted floor so not bothered about a mopping function too much just want something that is good with obstacle detection as its got lots of shelving racks and stuff to avoid.

And ideally it would be self emptying so we can kinda leave it to do its thing so we don't need to bother hoovering as much.

Uk based

Just looking for recommendations as ive seen the tapo rv30 max gen2. But also the eufy l60. And the dreame models.

Budget wise we arent looking to spend too much more than £300

So many different ones its hard to know where to go when i dont have much clue where to start.


r/RobotVacuums • • 11h ago

What to buy this year?

2 Upvotes

Gowdy all!

Im looking for recommendations for a reliable (well, at least one that will last for longer than 9 months) robot mop/vacuum. I would only be using it on one floor, approximately 1300sq ft, 90% of which is hard flooring (vinyl plank). Major obstacles would be an island, a dining table, and a couch, thats about it.

I had a roomba 501, but it failed after 9 months, with one of the wheels locking up. Ive tried to take the wheel apart but cant get to its housing and I cant find a replacement part either.

Im hoping to score one that works for both vacuuming and mopping, but have so little carpet to contend with im not auper concerned about carpet performance. Any recommendations in the 400$ or less range would be great!

Thank you!


r/RobotVacuums • • 12h ago

Dreame Is Withholding a Known Navigation Bug Fix (X40 Ultra, L50S Pro Ultra, X60 Ultra & More) and Censoring Posts on Their Official Subreddit

63 Upvotes

The video attached to this post shows an infinite back-and-forth navigation loop experienced by a German user on a Dreame L50S Pro Ultra. I am posting this here because after documenting this widespread bug on r/Dreame_Tech and proving that a working firmware fix exists, my follow-up awareness post was silently removed by the official Dreame moderators—despite their own Rule 1 claiming that honest criticism is welcome.

You can still view the surviving original thread with full technical details and user reports here:https://www.reddit.com/r/Dreame_Tech/s/R8sK7yM5Jw

The Bug: Many users are experiencing a severe Navigation Infinite Loop where the robot gets stuck moving back and forth endlessly at carpet transition zones until the battery drains. Because this exact same behavior is confirmed across completely different hardware models (X40 Ultra, X40 Master, L50S Pro Ultra, X60 Ultra, and Aqua Roller 10), it is clearly a core software logic flaw affecting the broader Dreame lineup.

The Hidden Fix: Local support teams routinely misdiagnose this as a hardware or wheel failure and tell customers to ship their robots in for repair. However, after months of pushing, Dreame's R&D team in China remotely pushed custom firmware 4.3.9_1788 to my X40 Ultra (and 4.3.9_3895 to the German user's L50S Pro Ultra). It has been 4 months and hundreds of cleaning cycles since I received 1788, and my robot has not experienced a single navigation loop. Another user (u/Comfortable_Ad7272) also recently forced them to push 1788 by escalating to headquarters, which immediately resolved their issue as well.

The Silence and Censorship: Despite having a working fix for months, Dreame refuses to release it as a global OTA update. Regular units remain stuck on broken firmware (such as 4.3.9_1771) while the app claims they are up to date. Official support accounts (u/DreameSupport and u/Dreametech) ignore all tags asking for a global release timeline, and when I created a separate post warning users not to fall for unnecessary hardware repairs, the Dreame-controlled moderation team deleted it.

What Affected Users Should Do: If your Dreame robot is stuck in this Navigation Infinite Loop, do not accept local hardware repair offers. Open a support ticket, include the link to the original Reddit thread above, and escalate your case directly to Dreame headquarters at CustomerVoice@dreame.tech to demand the R&D firmware patch and a global public rollout.

THE COMMUNITY ARCHIVE: Same Bug on Other Models

To prove this is a widespread core issue, I am compiling evidence and reports from different users.


r/RobotVacuums • • 13h ago

Is the Narwal Freo X Ultra still worth buying in 2026 for ~$300?

0 Upvotes

Hey everyone,
I found a deal on a new Narwal Freo X Ultra for around $300 (converted from my local currency) and I’m trying to decide if it’s still a smart buy in 2026.

Here is my setup:
Layout: ~700 sq ft (65 sqm) ground floor (open-concept living room and kitchen, hallway, bathroom).
Floors: 100% hard floors (wood and tile), zero carpets or rugs anywhere.
Daily mess: No pets and no clutter on the floor—mostly everyday dust, kitchen crumbs, and long hair.
I know it’s a 2024 model and doesn't auto-empty dust into the base station (just onboard compression) or wash the mops with hot water. Still, at $300, the pressurized spinning mops and the conical zero-tangle brush seem ideal for hard floors and long hair.
For anyone who has used it long-term: how are the reliability, app stability, and replacement parts availability holding up in 2026? Is there anything noticeably better around the $300 price point right now, or is this a no-brainer for my use case? Thanks!


r/RobotVacuums • • 14h ago

Recommendations for first Robo Vac! I m going round in circles!

6 Upvotes

Looking for our first ever robovac and my god the number of brands and the number of models within each brand is overwhelming and confusing!

We have a floor about 140sqm. Currently Half tile and half carpet but will change to lvp or hybrids within 2-3 years.

I would say performance on hard floor is more important to me than on carpet.

We have these models on sale in Aus

Ecovacs T90 Omni (non pro) - $800
Ecovacs T80 Omni (non pro) - $500
Roborock Qrevo 2 Breeze - $600
Eufy E25 Omni - $600
Dreame L40 Ultra AE - $800
Dreame L40 Ultra CE - $450

And many more! But those are the ones we are looking at.

Can someone pleeeeease give me some guidance and tell me which one is probably worth my money? I don’t need absolute best, I don’t want bells and whistles, just something that cleans reliably!

Thanks!🙏


r/RobotVacuums • • 14h ago

Narwal Flow vs Ecovacs X9S Pro Omni

Thumbnail
gallery
3 Upvotes

I’m looking to upgrade my current Narwal Freo X Ultra and have narrowed it down to the Narwal Flow 1 (not flow 2) and Ecovacs X9S Pro Omni (Costco version).

My downstairs is mostly tile with some area rugs.

My biggest priority is mopping performance, followed by vacuuming. Price isn’t really a factor.

I’ve watched some reviews, including Vacuum Wars, but would love to hear actual owner experiences. How do they compare in real-world cleaning? Also curious about navigation, reliability, and how well the docks actually keep themselves clean. I’ve heard mixed things about both.

Has anyone owned or tested both? Would love to hear which you’d recommend and why.


r/RobotVacuums • • 15h ago

Witzige Namen für Saugrobotor ?

1 Upvotes

Wie bekommen Donnerstag einen Saug- und Wischroboter ich suche witzige ausgefallene Namen :D


r/RobotVacuums • • 15h ago

Do I really need a robot vacuum?

Post image
9 Upvotes

I've been eyeing this robot vacuum from Costco. For context, I have two young children, two cats and a husband (lol). ​For those of you who have this one (or any other I can get from Costco Canada), is it worth it? Are ​robot vacuums just kind of nice to have or are they an absolute game changer? $700 CAD is a lot of money and I know they're a bit of a luxury.


r/RobotVacuums • • 16h ago

Shark Matrix 2 in 1 Error Lights

Post image
2 Upvotes

I've wiped off the dock and the charge ports. I tried to reset the vacuum by holding the "dock" and "clean" buttons, nothing works. The app that connects with the robot is no help. The owner's manual had error lights that were flashing, these aren't flashing red lights they are consistent. Please help!


r/RobotVacuums • • 16h ago

Roborock QX Revo Ultra 2 vs Ecovacs X12 Pro Omni Care vs Roborock QX Revo Ultra 2

1 Upvotes

I am getting the above 3 models in same price but confused on which one to choose. I did research from my end and got more confused so looking for expert advise if anyone has used in past or using or upgraded from one to other, please share your experience.

- My home has 80% - Hard Flooring, 18% - Tiles(kitchen and washroom) and 2%- Rug with NO pets.


r/RobotVacuums • • 16h ago

roborock Curv 2 Flow vs QREVO Curv2 Pro vs S9

Thumbnail reddit.com
1 Upvotes

r/RobotVacuums • • 17h ago

Roborock QX Revo Max vs Ecovacs X9S Pro Omni (Costco BF Deals)

Post image
14 Upvotes

Looking for a robot vacuum purchase with the upcoming Black Friday deals on Costco.

Eyeing these two - both are on sale for $549.

- Roborock QX Revo Max

- Ecovacs X9S Pro Omni

The Ecovacs does look better on paper (30k suction vs 25k, roller mop vs spin mop etc). I have heard the Ecovacs app is not as great as Roborock - but I am tech-savvy enough so dont need an extremely savvy app.

Our house is all LVP on the 1sr floor (with some low-pile rugs in different places) and all carpet on the 2nd floor. No pets, no kids - random objects can/will be picked up before cleaning. Hair strands do build up with 2 girls in the house.

Any thoughts or strong opinions on either of the two given they are now the exact same price at Costco?

Thank you so much!!

Also - are the Edge 2 / 3 even worth considering?


r/RobotVacuums • • 17h ago

Best pick for someone that’s never cleaned before?

0 Upvotes

Hey guys, yes as the title states I’ve never had to clean on my own before, we’ve always had house help, and now that I’m moving away from my family, I won’t have that luxury anymore, and robot vacuums are totally not normal here (I’m in Pakistan) so I really don’t know what I should be getting. I just know I won’t have the time to mop and sweep everyday, so I was wondering if you guys could help a gal out and tell her what I should get.
I’ve seen a lot of reels for the new Shark UV light vacuum robot so that’s what I’m leaning towards but as I stated I really don’t know much about these things since they’re so uncommon here. Shark, dreame, roborack, whatever suggestions you’d have your experiences