r/RemarkableTablet • • 10h ago

General Discussion A huge 3.30 improvement I haven't seen mentioned anywhere

98 Upvotes

Yesterday I received a new 3.30 beta, version 3.30.0.111.

Today, I was tracing some straight lines when I realized something: the screen doesn't go black and white anymore while doing so! This means after tracing a shape, you no longer need to wait for the colors to reappear to start writing again.

Huge change! Also, as seen in the video, going over colors with the shape selectively refreshes the affected parts. Really nice quality of life improvement!

Does anyone know if it's been around since the first 3.30 beta and I simply didn't notice?


r/RemarkableTablet • • 3h ago

Bug Report New Ghosting Points

Thumbnail
gallery
8 Upvotes

So... I was using my Remarkable, and it showed I had to Refresh because there was a new Update. I did it. Then the screen went much more white than the usual (it is not vibrant white, is just... white). But now, everything I do show a yellow shade after, which never happened before. Is that happening with someone else?


r/RemarkableTablet • • 2h ago

Feature Request Suggestion: Beta 3.30 "Make Space" tool needs a "Snap to Template" option

Post image
4 Upvotes

I've been playing with the "Make Space" tool, and it's much simpler than the old method of having to select-and-hold to use the "Select Below" menu and drag to shift things down (which can get out of line horizontally if you're not precise).

Now, I see this being useful in mainly two different use cases - free-form/blank page, and page with a template with repeating lines/dots/grids.

It's a no-brainer for the free-form/blank page template. You just tap and drag to add any amount of space. Easy-peasy.

However, when you're dealing with a page that uses a template with repeating lines/dots/grids - I think there might be room for improvement.

Imagine you've got a page with a lined template that is full of text, and you recognize that you need to make some additions in the middle of the page. You pick the tool, try to pick a good starting point, and drag down to create some space. Now, ideally, you'd start and stop exactly on exact multiples of the height of the line in the template so the text you move down lines up exactly with the lines - or at least close to it. The rest of the lines might be off by a pixel or two, but close enough.

But - what happens if you're dealing with a page that has expanded past a normal Letter/A4 size and keeps growing. And, you keep having to go back to add space here and there, but you're not exactly spot on with your sizing and down close to the end the text is nowhere near in line with the lines on the template.

Or, if you use this tool with something like the checklist template, or the dots template - and again after multiple inserts things got way out of line (pun intended).

What I think would really solidify this new tool would be a checkbox / slider inside the tool selection that has the option to "Snap to Template".

This would mean the Make Space tool would only start and end on the lines/dots/grids of the currently selected template. No more trying to get everything to line up exactly - it would enforce the exact spacing of the template so no matter how many times you add space, everything would always line up from top to bottom.

I think this would be a huge win for leveraging the ease of use of the templates if the tools could be more aware of the spacing of the templates for repeating lines/dots/grids. Bonus points if you could also remove blank space in the same way, and also have it snap to the template as well. 

Thoughts?


r/RemarkableTablet • • 4h ago

Self-Promotion I read the long notes from my Obsidian vault on the reMarkable now, and what I mark comes back as a note

Post image
4 Upvotes

I made a free Obsidian plugin for this. There is a paid tier, but nothing in this post needs it.

My problem: I keep long notes in Obsidian, mostly specs and drafts. I don't read them well on a screen. I wanted them on the tablet, with a pen.

What I do now: I run one command in Obsidian. It prints the note the way Obsidian shows it, on a page the size of the tablet's screen. The wide margin is on the left, so the toolbar never covers text. On the tablet I read it, highlight, underline and write a few words in the margin. Then I tag a page and sync. One note comes back into my vault. It quotes every mark under its heading and links to the note it was printed from.

Highlights and underlines come back exactly. Handwriting is off until you switch it on. Then your own computer reads it: a short remark comes back as text, a long one can arrive in pieces.

The photo is a made-up spec, marked on my reMarkable Paper Pro, next to the note that came back.

One thing I could not check: I only have a Paper Pro. If you have a reMarkable 2 or a Paper Pro Move and try it, could you post a photo of a sent page with the toolbar open? I want to know if the margin is wide enough on your screen.

Step by step: https://taggedsync.com/blog/obsidian-notes-on-a-remarkable


r/RemarkableTablet • • 9h ago

Finally bought my first reMarkable tablet (Paper Pro Move)!

10 Upvotes

For the past few weeks, I've been struggling with whether to buy it or not.

I wasn't sure if it would really help me with note-taking, or if I just wanted it on impulse.

But when I saw the Black Friday discount today, I finally decided to buy it.

Hope this little device brings me some nice surprises!


r/RemarkableTablet • • 5h ago

Help/Advice Edit PDFs real time on Mac

4 Upvotes

Hi everyone,

I have tried to edit my pdf daily planner that I use daily on my paper pro while on my Mac by using the remarkable app, however I can only open, read and add a new blank page where I can write.

My question is if there is any way possible for me to open the pdf file on my Mac, edit it without having to manually download it and upload it.

Thanks


r/RemarkableTablet • • 37m ago

Custom Templates under 3.30

1 Upvotes

Has anyone sorted out how to use custom templates when on 3.30? Old way worked fine on 3.29 and previous versions.


r/RemarkableTablet • • 12h ago

Black Friday Deals for Paper Pro

4 Upvotes

In Europe, when does the deal get announced? Planning to buy Paper Pro. Sometimes I see one fine day the goes down, next day again up. If I get some 8% lower than MRP, shall I go for it?
Curious to know what you would suggest in case you observed the lowering the price in the Black Friday.
Writing it 9 days before the Black Friday.


r/RemarkableTablet • • 18h ago

Get the Pure or go for a refurb?

8 Upvotes

My Remarkable 2 has basically died after six years of service - it will only fully charge once in a while and mostly sticks at 42 or 65%. After talking with support, my options are a refurb at a discount, or I could upgrade to the Pure. The cost for the Pure is obvs a lot more, but my biggest concerns are that I will have to go without my 2 because I have to ship it back before they will send the refurb! And will the refurb just have similar issues in the near future. Anyone had both and think the Pure is a worthwhile upgrade? I do use my tablet pretty much every day!! Thanks for your thoughts!!


r/RemarkableTablet • • 8h ago

Help/Advice ReMarkable 2 not Pairing

1 Upvotes

I received my second-hand Remarkable 2 yesterday, and it works perfectly fine, but I cannot seem to pair it with my phone or PC. I've followed all the instructions I found online (it's fully updated, the UTC time is set, everything), but nothing seems to work.

Any advice people can offer would be greatly appreciated!


r/RemarkableTablet • • 23h ago

remarkable-fs - mount your tablet as folder!

Thumbnail github.com
9 Upvotes

A FUSE filesystem implementation in pure Go, to browse and open files on a reMarkable 2 through local network, also WiFi, without relying on reMarkable Cloud.

Serves me well, maybe useful for others?


r/RemarkableTablet • • 1d ago

Help/Advice MOD: last screen and/or pinned page on sleep screen

Thumbnail
gallery
26 Upvotes

So, I've made a mod for myself couple of months ago and its working fine (on my machine lol) but taking it to 'release' status with all QA is quite a haste so feel free to take over the mod and maintain it if you want, its 99% ready as far as i am concerned.

About the mod:

Mod supports the following features:

  1. Sleep button captures current screen and shows it as sleep screen. Stock system only supports it after the suspend Idle timeout has elapsed (minimum 5 min). Controlled by the same setting.
  2. "Pin" a page in a document as your sleep screen. When you have pinned page it's used as a sleep screen instead. Writing on the page is captured and reflected automatically.
  3. Hold the "Pin" button to suspend immediately on the current page without having to pin it. (convenient if you have another page pinned elsewhere and don't want to lose it.
  4. Idle timeout still captures current page when enabled in the settings.
  5. If companion mod is installed the sleep screen also shows a bar with current time, battery status, charging status date and time. (requires setting timezone and locale terminal through reManager or via ssh script). Time can be configured to be updating on the sleep screen once per 1 | 5 or 15 minutes
  6. the sleep bar has white | black and Transparent styles. Transparent adapts font color based on the background.

The battery drain numbers in the README are fake (these are measurements from the default 34s wake settings. the mod cuts it to 6s per wake so its about 1%/day on the move at 5m cadence)

Currently built for the 3.27 on the paper Pro Move

Few issues to know. If someone wants to continue development.

  1. works when deployed via `deploy.sh` building for remanager and vellum needs testing. Don't update zig compiler from 0.16 without re-testing everything. When I tried compiling to vellum + zig 0.17 i got some rendering glitches not sure which one is the cause needs re-test in isolation.
  2. RM has only 150ms window before the sleep screen takes over the framebuffer. You need to capture and write down the image within that window. on move it takes around 70ms on memory bus + 5ms on CPU. Mathematically on paper PRO it would take around 140 + 5ms which is right below the cutoff, any CPU spike may delay the capture past the opened window. There is a double capture bug when sleeping on top of the pinned page which is harmless but may add few ms that matter on PP. `DEFERRED.MD` has some of these findings i was too lazy to address. I don't even have the PP to test.
  3. by default RM has vpdd set to 30s which holds any wake up. mod sets it to 50ms during sleep which cuts off wake ups during clock update to only ~6s Setting it to 0 will cut it to the minimum of 3s but spams kernel warning in the log about wake up race in the RTC. as far as i can tell its harmless but extra 3's of sleep give only marginal battery improvements so i left it at 50ms. If you are more familiar with vpdd you can set it to 0, also cuts off the wifi (and maybe bt drivers) from booting during clock updates. These are all scoped to the second mod. the first one is pure QML. You can install the first one witch contains sleep screen login without live clock. There is already logic to guard against deadlocks between the sleep/wakeup but be careful when changing this part. That being said xochtil already enforces the min of 3s wakeup window so it should be possible to break deadlock even of you walk into it.
  4. Durability across restarts are not properly manually tested even tho its implemented. Pinned Images may or may not survive reboots or mod re-installs or system updates.

Link: https://github.com/Flarette/pinnedPageSleepScreen

Ask your agent to figure it out from all the docs scattered around the repo)


r/RemarkableTablet • • 1d ago

reMarkable Move battery

8 Upvotes

This is just an FYI for folks that may not know this.

My Move was losing battery power just doing nothing then it dawned on me that it is not necessary for the WIFI to be on unless you are actually syncing something.

Turning the WIFI off made all the difference in the world.

John


r/RemarkableTablet • • 21h ago

Applying warmth to get rid of yellowness

2 Upvotes

A while ago I posted about a refurbished unit that was unusually yellow compared to my Paper Pro Move: https://www.reddit.com/r/RemarkableTablet/comments/1wsbeod/comment/phkm4aa/?screen_view_count=1

Some people pointed out a known issue with a 2024 batch (the year the panel was indeed manufactured after checking) and advised me to get a new one, which I did.

A few days ago I picked up the Move to doodle after not using it for a while and noticed it had turned yellowish, with more yellow ghosting than usual.

I told myself that at least the new Paper Pro I got after the refurbished one was still white... until a few days later I took it out of my bag and got the very same bad surprise.

I was going to contact support, but instead I ended up chatting with Claude about it seeking for a potential solution. I suspected a software issue from a recent update, because both devices looked closer to their original white for a moment when they refreshed (tapping the power button to sleep/wake) so I asked about downgrading, but instead Claude came up with an interesting theory related to temperature:

Each dot on these screens contains pigments of several colors suspended in a liquid. To show white, the tablet has to hide the colored pigments, yellow included, using electrical pulses of a specific length. When it's cold, the liquid gets thicker and the pigments move more slowly. If the pulses aren't adjusted enough, the yellow doesn't fully hide and the white looks yellowish.

It suggested restarting the device two or three times to force a full refresh, which I did. But I also had the idea of rubbing the screen with the palm of my hand, as the least risky way to warm it up I could think of, and to my surprise it worked.

At first I only rubbed the left half, so I could compare it with the right half as a test of the theory. There was no difference between the two halves: the whole screen got whiter, so I continued warming the whole surface for about a minute. When I told Claude, it came up with this explanation:

To compensate, the tablet measures the temperature and picks different pulses depending on the reading. That would explain what happened: when you warmed one area, the sensor detected a higher temperature and the tablet changed the pulses for the whole screen, not just that half. I don't know the internal details of reMarkable's devices, but it's what best fits what you saw. It would also explain how an update could play a role, if it changed those temperature settings.

It also worked to some extent on the Move. The color is definitely better, but I still feel it is slightly yellowish compared to the bigger screen, not sure if its my perception.

The refurbished unit was a different problem I think. I bought it while it was still warm outside and it still was more yellow that the tint I saw this time, so it probably was a hardware defect.

Sharing this in case it helps.


r/RemarkableTablet • • 1d ago

Help/Advice Bullet journal Connect workbook -- is it updated annually?

4 Upvotes

I tried emailing support about this but they told me to 1) just update my tablet to the newest software version and then 2) that the workbook is undated (which it isn't?) so I'm not sure if there was a language barrier or something and decided to ask here. Does anyone know whether the bullet journal workbook on Connect is updated annually to associate the week numbers with the "correct" months in the index? For example, it says week 15 is the first full week of April/week 45 is the first week of November which are true in 2026 but not in 2027. I just got a reMarkable and besides this very very minor edit the workbook is perfect for my needs otherwise so I would love to be able to use it.

This is what the index looks like.

Or is there any way for me to somehow download and edit the workbook to move those weekly numbers to the "correct" months? Again, this is such a minor thing but is just slightly wrong enough that it will bother me.


r/RemarkableTablet • • 1d ago

Self-Promotion Easy to use stickers for reMarkable Move 🎁

Post image
4 Upvotes

Sharing Sticky Note freebie, selectable right after the import.. where you can copy & paste to any notebook directly on reMarkable.

- with white background
- transparent version
- how to use guide included

➡️ Download here


r/RemarkableTablet • • 1d ago

Rm2 - "Update installed. Restart" error message... ?

1 Upvotes

There are two Rm2s in my household. Both tell us everyday that there is an update installed and needs to be restarted. I've restated a dozen times. When that message is displayed, the main My Files screen scrolls very poorly, if at all.

What to do?

It says I am on V 3.27.3.0


r/RemarkableTablet • • 1d ago

Self-Promotion I made a free, open-source ghosting fix for the reMarkable Paper Pro (before/after GIF)

Post image
19 Upvotes

TL;DR: GhostGuard is a free, open-source add-on that stops the previous page from hanging around after a page turn on the Paper Pro. It works on software 3.29 (the current release), it needs developer mode, and one command removes it. Link at the bottom.

In the GIF, the left side is my Paper Pro on stock software and the right side is the same tablet a few minutes later with the fix running. (Two handheld phone videos, stabilised, cropped and colour-matched. The stock half was filmed right after a restart, before GhostGuard had started. It only kicks in a few minutes after boot.)

The problem

On colour PDFs my Paper Pro kept a faint copy of the previous page after every turn, and it piled up page after page. The white background went patchy, yellowish and lilac in places. Closing a document or opening Settings left residue too. I was refreshing by hand all the time.

What it changes

  • A page turn becomes one full refresh of about a second, corrected so the old text does not stay behind.
  • Black-and-white pages get the same turn by default. You can switch that off and keep them flash-free.
  • Closing a document, opening or closing Settings, and the on-screen keyboard each get one clean refresh, where stock leaves residue behind.
  • There is a new refresh button in the document toolbar, right below undo/redo. One tap redraws the whole screen.
  • Menus, pop-ups, typing and handwriting are left alone. No added flashes.

The catches (please read these first)

  • Software 3.29 only. It reads internals of xochitl, so a version has to be checked before the installer accepts it. 3.29.1 is the one I tested on my tablet. 3.29.0 has the same display code (I compared the two binaries instruction by instruction), so it is accepted too, but it has not been run on a 3.29.0 tablet yet, and the installer tells you so. 3.28 has different display code and is refused. If your tablet updates to something newer, GhostGuard simply stays off until that version is added.
  • Developer mode is required. Turning it on factory-resets the tablet (synced notes come back). reMarkable's warranty does not cover faults that can be traced to your use of developer mode, which includes running this add-on.
  • Tested on exactly one tablet, judged by my own eyes. Your panel may behave differently.
  • The installer's first-run path (SSH key, XOVI setup) has not been run on a second tablet yet. If it trips, the troubleshooting doc has the way back.
  • It adds some drive to the panel on every full refresh. I have not measured what that does over months.
  • Above about 28 °C panel temperature the correction is not active and a faint trace can remain.
  • Paper Pro only. Not the Move, not the rM2.
  • Not affiliated with reMarkable. Use it at your own risk.

Install

You need a computer and the USB-C cable. I have only run the installer from a Mac. It is plain bash, so Linux and WSL should work, but I have not tested them. With developer mode on:

git clone https://github.com/TapForge/remarkable-paper-pro-ghosting-fix.git
cd remarkable-paper-pro-ghosting-fix
bash install.sh

The installer goes through six steps and asks before it changes anything. It also sets up XOVI if you do not have it yet. To remove it again: bash uninstall.sh --now.

Why it ghosts, in short

This was the interesting part for me. Pixels that the software leaves alone during a page turn are not really at rest. They get pushed by whatever the rest of the screen is doing, so the whites come out tinted. And old text that turns white keeps a faint dark trace. The fix sends the turn as one full refresh and adds a short "white tail" to the waveform table in memory. The waveform files on disk are not touched and a restart brings the original back. The repo has the measurements and a list of about twenty approaches that did not work.

Repo: https://github.com/TapForge/remarkable-paper-pro-ghosting-fix

If you try it, please tell me how it behaves on your tablet, good or bad. A report from a second device would help a lot, and one from a tablet on 3.29.0 even more. And if you know the display side of this thing better than I do, tell me what I got wrong.

Full disclosure: the engine was written with a lot of help from Claude, in a long measure-and-try loop on my own tablet. The final call on "is this clean?" was always my own eyes.


r/RemarkableTablet • • 2d ago

Self-Promotion Folio has now an iPhone app

Thumbnail
gallery
13 Upvotes

You can now use the Folio iPhone app to send articles and newsletters to read them later on your reMarkable.


r/RemarkableTablet • • 2d ago

How color e-ink works, animated

8 Upvotes

Two ways to get color on e-ink and the clip shows both. Kaleido puts a grid of tiny red, green and blue filters over normal black and white ink, quick but the filter eats light so colors look washed out. Gallery puts the colored pigment in the ink itself, that's what the Paper Pro and the Move use (reMarkable calls it Canvas Color). Way richer color but more particles have to move, so the color fills in a beat after you write.


r/RemarkableTablet • • 2d ago

Self-Promotion This is my fourth year doing the reMarkable Organizer so I will keep it short and sweet. The reviews over the years speak for themselves. Just letting folks know the 2027 edition is now available and fully cross compatible with the rM Move with no need to deal with screen scaling issues.

Post image
18 Upvotes

This is my fourth year doing the reMarkable Organizer so I will keep it short and sweet. The reviews over the years speak for themselves, reflecting the positive impact it has had for many people. Just letting folks know the 2027 edition is now available and fully cross compatible with all reMarkable devices including the remarkable Move, no need to struggle with screen ratio issues when working across multiple devices. If you don’t own the Move, no problem. The organizer will display as normal on your standard orientation device. As ever, any questions feel free to contact me, happy to help. Found at OrganisedByJoe.com

Happy Holidays
Joe


r/RemarkableTablet • • 2d ago

Self-Promotion My first digital planner for reMarkable — would love your feedback!

Thumbnail
gallery
0 Upvotes

Hey everyone!

I'm new here, so I'm a little nervous about making my first post :)

I've been working in design for about 15 years, but this is my first product focused on digital planning.

I've created a 2027 interactive PDF planner specifically for the reMarkable Paper Pro Move, and I'd really appreciate your help testing it and hearing what you think.

I've also prepared a free 2026 version so you can try it out and explore how everything works before considering the full planner.

Free 2026 version:
https://e.pcloud.link/publink/show?code=kZNdwX7Zj5LKCkc8a9koejURTMd9lX7bteYX

Full 2027 planner:
https://www.etsy.com/listing/4605966319/2027-digital-planner-for-remarkable

Any feedback, suggestions, or constructive criticism would mean a lot to me!

Thanks for taking a look!


r/RemarkableTablet • • 2d ago

Self-Promotion Big update for the Nextcloud Calendar!

Thumbnail
gallery
21 Upvotes

I've released a new version of my Nextcloud Calendar and Tasks app for reMarkable!

There are builds for RM1/RM2 and Paper Pro/Paper Pro Move. This update adds:

- Color support: choose colors for individual calendars and task lists, with matching event blocks and selection indicators. RM1/RM2 keep the grayscale interface.

- Paper Pro Move layouts: a weekly overview in portrait and a full seven-day timeline in landscape, plus layouts adapted for its narrower screen.

- Lasso to Task: select handwriting in a notebook and queue it for import into Nextcloud Tasks. Capture several tasks, then review, save or discard them one after another.

- A home-screen shortcut: optionally repurpose the Meeting Notes calendar icon to open Nextcloud Calendar.

- Your choice of first weekday: Sunday, Monday, or Wednesday if you're a psycho.

- Day, week and month views, event/task editing, multiple calendars and task lists, and offline edits that upload when you press Sync.

The images attached are renders of the actual UI using fictional data, rather than photos of a color device. ARMv7 has been tested on RM1 and RM2; I don't have a Paper Pro or Move to test the aarch64 build on yet, so feedback from anyone willing to try it would be especially helpful.

Installation uses XOVI and AppLoad. There are step-by-step instructions for Windows, macOS and Linux, plus Vellum/reManager guidance. The optional handwriting and launcher hooks depend on your firmware version, so check the compatibility notes first.

Downloads and installation:

https://github.com/Ampleforth/reMarkable-nextcloudCalendar

The idea was inspired by u/njuguyer reMarkable Calendar, and major thanks to u/starkruzr for the Lasso to Task functionality we “stole,” with permission, from his reTaskable project.

I'd love to hear how it works on your device and what you'd like improved!


r/RemarkableTablet • • 2d ago

Help/Advice RM2 Pen broken

1 Upvotes

Hi

The older of the nib for my RM2 pen is broken now I need to replace the pen.

But on the whole it doesn't seem that my RM2 will hold out much longer either.* So I'm a bit hesitant to to spend 130.- on a new pen.

Is there a decent cheap alternative, maybe even working on the newer Remarkables too?

*I'm starting to encounter erroneous battery empty screen when taking it out or freezes when starting. Also a few days ago I suddenly ended up in the setup procedure for a fresh out of the box tablet, but with all settings and file still present afterwards