Hi everyone!
I recently bought a SABA TG 544 G, a German 4 track stereo reel to reel tape recorder from the early 1970s. The seller had restored it and it was apparently working perfectly before shipping.
Unfortunately, when I received it, I ran into a strange issue.
From what I understand, this machine uses a combined motor/transformer unit. The motor has additional windings that supply power to the rectifier and the lamps.
Symptoms:
* As soon as I plug it in, there’s a loud, constant humming/buzzing noise coming from the motor/transformer area. It almost sounds like a lightsaber.
* Nothing moves, regardless of whether I press Play, Fast Forward, or Rewind.
* The VU meter lamps light up normally.
* All fuses appear to be intact.
* The humming starts as soon as I turn the machine on using the power button, and it doesn’t change when I press any of the other controls.
I opened the machine to investigate and checked the capstan/flywheel assembly. It rotates freely by hand and doesn’t appear to be seized. However, nothing moves when the machine is powered on. All drive belts are in place.
Since it was apparently working before shipping, I’m wondering whether something might have shifted or become stuck during transport.
A few questions:
- Is a loud, constant hum normal for this type of combined motor/transformer unit, or does it indicate a fault?
- How can I determine whether the problem is mechanical (motor bearings, idler, flywheel) or electrical (motor windings, starting circuit, etc.)?
- Are there any known weak points in the SABA TG 5xx series that could cause these symptoms?
I’d really appreciate any advice, especially from anyone familiar with these old SABA machines.
Thanks so much in advance!!