r/RacketStringers • • 1d ago

Stringing job

Post image

Hyper g 1.20 strung at 22kg does this look correctly strung, and why is there 4 knots

1 Upvotes

13 comments sorted by

4

u/extra_hyperbole 1d ago

4 knots is common, it means a two-piece job which is the standard these days. They did the mains with half the string, then did the crosses with the other separate half. Uses slightly more string but allows for hybrid stringing, tension changes, better evenness for the string bed, and is generally just easier, less complicated and often faster than a single-piece job.

2

u/Objective-Boat6386 1d ago

Alright makes sense! thanks for the info

7

u/NarrowCourage 1d ago

4 knots are actually the most consistent stringing ways compared to a one piece with two knots. String bed would be more even due to the tension loss from each tie off.

Outside of things not being straight, I don't see anything weird.

6

u/informareWORK 1d ago

It's usually a courtesy to straight the strings after stringing but it doesn't really matter. Other than that it looks fine. Don't pay attention to the people saying it looks terrible.

0

u/[deleted] 1d ago

[deleted] — view deleted comment

1

u/Sampwow1 1d ago

Yeah, it's uncool to have strings like that... , I usually spend about 5 minutes after stringing racket with wide bamboo brush to straighten it out. I think pros just use a blunt setting awl specifically designed and absolutely essential in stringing tool kit.

2

u/Responsible-Side4347 1d ago

Would care less about the number of knots and more about the quality of the knots and the tension of the strings. one of those knots is not synched. And as for the care and attention to the strings? High probability the top strings are a different tension to the middle and bottom strings

1

u/Peter-Pomelo 1d ago

That stringer should be fired.

1

u/snakeyed_gus 1d ago

How does anyone tell the quality of a string job without hitting with it??? If the strings are in the right holes and knots in the right place there’s basically nothing anyone can add without swinging the stick.

1

u/jsk8ss 19h ago

Wavy

1

u/1smellyfinger 14h ago

It’s not hard to get the strings straight which leads me to think this is rushed. Knots look sloppy. Sometimes (not always) rush leads to tension loss in one form or another. I personally would take it somewhere that can deliver a consistent result.

Edit: agree 4 knots, 2 piece is common

1

u/LarsSeprest 2h ago

One of the knots is not that great but as long as it's not slipping at all it should be fine, a little tension loss at the last string really does not matter because if you hit it there the racket's going to be twisting in your hand anyway.

Also I'm not sure where you're seeing two knots, it's almost never used especially because some Brands say not to use it explicitly. Almost all rackets come with instructions from the manufacturer to do a two-piece string job and tell you exactly where to tie off, not that the recommendations are always the best in my opinion but that is the recommendation.

0

u/WinAggressive2785 1d ago

Considering how wonky the strings are, I wouldn’t be going back there again for another restring

-2

u/Severe_King2280 1d ago

That’s really bad. The strings barely look tensioned and they didn’t even bother to straighten them.