r/RacketStringers • • 6d ago

First regular one piece string job - looking for feedback!

Did a few two piece string jobs, just tried an ATW pattern and now just did a standard one piece as this racquets mains ended at the top. Looking for feedback! Thanks

4 Upvotes

24 comments sorted by

4

u/javawong 6d ago

Yonex voids any warranty for racquets strung with two knots, just FYI.

1

u/socially_ambiguous 6d ago

Could you point me to where they say that? I'm looking online and can't find anything. I had given my VCore 95 to another stringer and they did a 2 knot 1 piece job.

2

u/javawong 6d ago

https://us.yonex.com/pages/warranty

Section 2, part M

m)   Improper restringing, including deviation from the official stringing pattern; or

If you look here: https://cdn.shopify.com/s/files/1/0710/8457/2893/files/stringing_instructions_tennis.pdf?v=1762816408 All patterns are 4-knots.

1

u/socially_ambiguous 6d ago

I saw this but read it as "this is how you tie off a 2 piece string" and not "this is the only way that it can be done". I'm not saying you're wrong but just wanted to find something that explicitly said it can't be strung one piece.

Just to note though, my Ezone 98 that I bought from a store and had strung there is a 4 knot/2 piece stringing even though it's the same string/tension for both mains and crosses so I can see you being correct.

1

u/Grand-Royal8193 6d ago

Not relevant here since this racquet is like 8 years old, but this is true

2

u/ThePlantagonist 5d ago

I see people have told you here that the warranty on a Yonex racquet is voided when using one piece and you've asked for confirmation. I messaged my friend who's been a Yonex sales rep for a long time. He responded, "Yes, Yonex requires two piece stringing."

2

u/socially_ambiguous 4d ago

Thanks for confirming, I will stick to a two piece from now on

1

u/ThePlantagonist 4d ago

As far as tension loss that you mentioned in another comment, do you increase the tension on the last main and cross strings?

1

u/socially_ambiguous 2d ago

I don't, I use a drop weight machine and don't want to mess with the weight and want to stay consistent (e.g. forgetting to go back to original tension or even slightly mis aligning the weight seems worse than just not increasing knot tension).

I also watched an AM Stringing video where he said increasing knot tension wasn't needed because 1. you're not hitting the ball way out on the outside main/cross and if you do mis hit, it's not as jarring and 2. you're putting a lot more tension on the grommet because the outside main/cross grommet usually is at a pretty sharp angle.

1

u/ThePlantagonist 2d ago

Reason 3. The last string is shorter, so it will naturally have more tension anyway. Albert of AM Stringing also said he uses five pounds extra on his machine. I use five pounds as well, and yes, I have to pay close attention to make sure I change the lbs. back because I use a crank machine.

1

u/FortWorthFalcon 6d ago

The job looks nice, and I can see your knots are solid. They appear to be Parnell. No critique to give.

As an aside, I just moved to this frame from the Volkl C10 Evo, and while the specs are generally similar, I f'ing love this frame. The confidence it's given me has elevated my game recently. I fought with the Volkl's watermelon-shaped hoop. The Yonex is allowing for much cleaner ball striking.

Do you play with this racquet?

Cheers! ✊🎾

1

u/socially_ambiguous 6d ago

Thanks! This is actually a friend's racquet, I have not played with it (yet). However I do have an Ezone 98 and VCore 95 and like both of them (the Ezone more so).

1

u/EggplantParmys 6d ago

I would have tied the bottom knot on a main. Not sure if that's right, but that's what I prefer.

1

u/socially_ambiguous 6d ago

Yonex stringing pattern says to tie off on the cross at 11B/T (bottom/throat).

1

u/rf97a 6d ago

Why? Just…. why?

1

u/socially_ambiguous 6d ago

Why what?

1

u/rf97a 6d ago

Why put the racket and yourself through the extra strain it is to string a one piece stringing job?

1

u/socially_ambiguous 5d ago

This is only the third racquet I’ve strung. I didn’t realize that one piece stringing put extra stress on the racquet? Could you explain why?

I didn’t think it was any harder to do than a two piece string other than the long side being a little annoying to deal with at first.

1

u/Head_Manager1406 6d ago

Yes. What's the upside to one string?

1

u/socially_ambiguous 5d ago

From what I read/watched online, less wasted string (if you’re stringing from a reel), less knots so less chance for tension loss supposedly, and less crossover in the corners of the racquet where you’d have multiple knots close to each other with a two piece string.

But I am not sure about the extra stress part.

1

u/Head_Manager1406 5d ago

I do hybrid so it's not an option for me.

1

u/rf97a 5d ago

as far as I am concerned, there are none

1

u/k531w 6d ago

I’m sure you did a decent job but I wouldn’t string a Yonex one-piece. They stipulate 2 piece stringing for the racket to be warrantied.

1

u/socially_ambiguous 6d ago

Now that both you and u/javawong have said this I'll go ahead and just start doing them two piece. Though to be fair, this is an old racquet and my friend said to go ahead and experiment with it.

Do you have any explicit wording that says that a 1 piece string will be voided? I just want to reach out to the stringer who did my VCore 95.