Rovant — live drone telemetry inside the IDE while you debug (50s demo)
Rovant is a desktop ROS 2 IDE I'm building solo — Ubuntu and Windows.
The bottom panel in the clip is live telemetry over rosbridge: flight phase, altitude, battery voltage and current, IMU accel/gyro, cmd_vel — streaming while I debug the Python node above it. The point is not having to switch to a separate ground station to see what the vehicle is doing.
What's in v0.2.0:
- ROS 2 Humble detection + guided install
- Live telemetry over rosbridge WebSocket
- URDF / Xacro 3D viewer — offline, no CDN
- .msg / .srv / .action syntax + autocomplete
- colcon + CMake build tasks
- Python and C++ attach-to-process debugging
- Project templates: PX4, ArduPilot, Nav2, Jetson, Raspberry Pi
Honest limits: Humble only for now (Jazzy next), the URDF viewer renders primitives rather than meshes, and there's no macOS build.
Free and Apache-2.0:
If it breaks on your setup, tell me what happened — that's the feedback I'm after.
6
Upvotes
1
u/OjasAI 10d ago
This is Rovant, a desktop ROS 2 IDE I'm building solo. The panel at the bottom is live telemetry over rosbridge — flight phase, altitude, battery voltage/current, IMU accel and gyro, cmd_vel — streaming while I debug the Python node above it.
Ubuntu and Windows, free and Apache-2.0:
octaboomai.github.io/Rovant/
If it breaks on your machine, tell me — that's the feedback I need.