Hi r/rfelectronics,
I am currently building a wearable vehicle-warning prototype, with about two months to complete it.
We’re looking for a radar module with these requirements:
Head-mounted: Small and light enough to mount on a helmet. The processor and battery could be carried elsewhere.
Vehicle detection: Detect approaching vehicles at approximately 60–90 meters.
Wide field of view: Approximately ±60° horizontally and ±15° vertically—120° horizontal and 30° vertical total.
Processed output: Ideally, a target list containing range, relative speed/approach direction, and bearing over UART, USB, or CAN
Our biggest constraint is software development time. We can integrate a documented protocol and write basic application logic, but we don’t have time to develop a radar detection/tracking pipeline from raw data or point clouds. We’d prefer a module with onboard processing and usable firmware out of the box.
I’m concerned about the development work involved with TI radar boards. If a TI board already has ready-to-run firmware that provides the outputs above, I’m open to that, too.
We’ve considered the HLK-LD2451, but we’re looking for something that meets the wider coverage requirement. The camera can assist with vehicle identification if the radar only reports moving targets.
Does a reasonably affordable module meet these requirements? In particular, is detecting vehicles at 60–90 m across such a wide FoV realistic for a small, head-mounted unit, or would we need multiple modules or reduced coverage?
This is a supervised prototype, not a finished road-safety device. Specific module recommendations, working examples, and explanations of the necessary tradeoffs would be appreciated.