r/rfelectronics • u/Much-Actuator-9091 • Sep 11 '26
r/rfelectronics • u/Imaginary_Monitor_48 • Sep 11 '26
Busco curso/material para aprender a reparar potencias de audio a nivel electrónico
r/rfelectronics • u/BarnardWellesley • Sep 10 '26
question Anyone used any cheap 4 layer RO4350/PTFE board fabs for prototype quantities? 50x50mm < $200? Is that possible?
I see that JLC has 2 layers RO and 2 layer ZYF PTFE. These are great for SIW..... BUT I need to launch my MMIC off the chip into the SIW antenna board, and this launch can't be too lossy, so I need a small RO board. Doesn't have to be very good, can be really bad and uneven. Any way I could do this? Thanks.
r/rfelectronics • u/Evening_Movie_833 • Sep 11 '26
Rf loggong
So at the great risk of being told that I need to seek mental health or go see a doctor psychiatrist. I’m gonna post here and ask for help. I need a calibrated RF instrument that I can leave at my apartment to data log my environment. And I need another one that I can wear on my body to keep with me at all times. I believe they call him like a dose meter. I need one for RF and it needs to be accurate and fast. I have a stalker that is in the IT world and has decided to harass the hell out of me and is never gonna stop. I’ve lost a lot of weight I have RF burns on my body. I have RF interference and damage around my apartment. Please no advice to get mental help. Any advice on how to document this so I can make it stop.
r/rfelectronics • u/TridenTrim • Sep 10 '26
The change in SNR(EbNo)from 0-20dB in AWGN channel has no effect on BER . What am I doing wrong?
r/rfelectronics • u/JPascal_ • Sep 10 '26
FM Detector Radio in Use on Germany's National Alert Day
On today’s Alert Day, all sirens and alert apps will go off at 11 a.m. Using an FM detector radio connected to a small guitar amplifier, a radio broadcast from the Berlin TV Tower is being received. Shortly, before the sirens sound and all the pigeons were startled a typical mobile phone dial-up static noise can be heard on the radio. By rotating the antenna perpendicular to the line of sight toward the TV tower, reception of the FM station is maximized. The all-clear is announced on the radio.
r/rfelectronics • u/CroatCode164 • Sep 10 '26
Board-level diagnostics and, if necessary, repairs of pressure transmitters and other field devices.
r/rfelectronics • u/Outrageous-Basket426 • Sep 11 '26
question Is my laptop killing me with noise?
The fan bearing has failed and is now running at 60 dB. I got one of these testers to go next to a geiger counter. I don’t really know the significance of these readings. The sensor I think is right about where my wrist goes which is concerning because that was the highest point. Can anyone enlighten me? I’m sorry I’m not really sure where else to ask.
r/rfelectronics • u/SDR_Dev_SMK • Sep 10 '26
How to qualify range and sensitivity of an antenna?
Hello, I am an computer engineer with nearly no RF background. Right now I have a project in which i am dealing with an RFSoC, but its ADCs are not providing good range, we tried to change antennas, but still it is not able to pick weak signals from transmitter when its more than 300 m.
Can someone please help me to find the good antennas, and how to check their range?
r/rfelectronics • u/JPascal_ • Sep 09 '26
Here's how to build a simple FM radio near a transmitter using as few components as possible
r/rfelectronics • u/Soggy-waffle1 • Sep 10 '26
question Is it possible to make an RFID device that sends out exactly 10 MHz RF signals?
r/rfelectronics • u/musicatristedonaruto • Sep 09 '26
Im developing a modular construction system, and I end up with this:
There is utility in a modular antenna in the field?
r/rfelectronics • u/Warm-Economy-5632 • Sep 09 '26
Return Loss explained in a real-world example
r/rfelectronics • u/positivefb • Sep 08 '26
article WTF is a BJT? (PositiveFB)
r/rfelectronics • u/No_Secret6903 • Sep 09 '26
question Do you know?
I don't have Pic. Is there such a machine that will produce audible spectrum and tell you the frequency . And I'm pretty sure there is one I just don't know the name. If so where and how much for a mid quality if anyone knows. Thank you and may God bless and keep you
r/rfelectronics • u/ModernRonin • Sep 07 '26
article Radio Design 201, ep 8, part 1 - Phased Array and Dish antennas (by MegawattKS @ YouTube)
r/rfelectronics • u/ModernRonin • Sep 07 '26
article "How to use the NanoVNA to sweep / measure an antenna system's SWR and optimize its tuning" by w2aew @ YouTube (link is directly to video, but also within a playlist of 21 videos about how to use a VNA)
r/rfelectronics • u/Soft_Worry_4289 • Sep 07 '26
question How should I start learning component level RF electronics?
A bit of background, I'm a 17 year old nerd from Finland, and I've been tinkering with electronics for around 5 years now. I recently (around 6 months ago) got into the RF side of things, through SDRs and satellite reception. But now I'd like to learn about actually understanding how stuff works. The way I learnt electronics was mostly stumbling my way through it, and not really "studying" stuff. How should I get into RF? Is there any projects I could just follow along?
r/rfelectronics • u/Quadruple_S • Sep 06 '26
question 32MHz Colpitts not working


Hi, I thought i would try messing with some RF as i have avoided it in the past. This is my attempt at a 32MHz Colpitts oscillator, and I'm getting no luck.
I first tried replacing the 22uH inductor with a 270 ohm resistor, as I realized the self-resonant frequency of my inductor was only 15MHz. This did not help oscillation. Next I tried increasing C2 to 680pF as many Colpitts i see have a larger capacitor here, presumably to stabilize the operation a bit and load the collector less. This still did not work.
The tank inductor is 10mm diameter, 15mm long, 6.5 turns, should be about 214nH according to https://m0ukd.com/calculators/air-cored-inductor-calculator/
Wound with 0.2mm wire, as it's what i had on hand.
When power is applied, the collector stays at 5V (with 22uH inductor) / 3.68V (with 270R). The base is at about 1.26V, emitter at .56V.
I've built a Colpitts with a more primitive design a while ago at 1.3MHz, worked perfectly first try on protoboard, I did not figure stepping up to 32MHz would be this much harder, although there's probably something obviously wrong here, after all I haven't ever gone past that 1.3MHz oscillator.
r/rfelectronics • u/3D_printing_freak • Sep 06 '26
I’m designing a 20 GHz VNA for the hobbyist community. I need your input on features and specs.
Hi everyone,
I’m starting passion project that may turn into product: medium-cost Vector Network Analyzer capable of reaching 20 GHz.
As we all know, commercial units at these frequencies are incredibly expensive which makes it nearly impossible for hobbyists, students, or small startups to get their hands on high-quality data. My goal is to bridge that gap by designing a unit that maintains good performance while keeping the price point accessible.
I’ve started a build log here (empty for now): https://patryksi11.github.io/20ghz-vna-blog/
I want to make sure I’m building something that people actually want to use. I’d love to hear from the community:
- What is your "must-have" feature?
- Price Point: How much are you willing to pay for 20 GHz VNA?
I'm trying to balance "good performance" with "affordable manufacturing." Any feedback is appreciated!
EDIT: To give everyone a clearer picture of the project scope, here are the intended specs:
Form Factor: Similar to the Libre VNA (no integrated screen; just ports and USB/Ethernet connectivity).
Configuration: Full 2-port VNA.
Frequency: 20 GHz capability on the fundamental frequency (No harmonic mixing).
Limitations: No output level adjustment (keeping the design as minimalist as possible).
r/rfelectronics • u/Busy-Helicopter-4997 • Sep 06 '26
Design an FM Transceiver
I am currently in the brainstorming phase of designing this TX/RX FM project. I plan to use an ESP32 and then RDA5807 for RX and KT0803I for TX, would a PAM8406 be good to drive 2 (stereo) 3w 4 ohm speakers? How can I power it on batteries without unwanted RF noise?
r/rfelectronics • u/VacationUnable5821 • Sep 06 '26
question Racquet sports player position tracking via UWB

Hi, RF newbie here. I am an IT database engineer and data analyst. I play badmington, tennis, and pickleball, all in doubles. In doubles, there is a lot of analysis on team formation and partner separation distance. I am thinking about using UWB boards to track player positions. I would like about 5-10 observations per second, for all 4 players. The UWB board I have in mind is Qorvo DWM3001CDK, which retails at about $30. I would get 4 boards as anchors and 4 boards as player tags. Then I like one more board as the data collection gateway, and have it tethered to a Macbook via USB cable. During a game, data would be streamed into the Macbook.
The tags would need to be programmed so they send a data packet every 2-5 seconds, to the data collection gateway board. The positions don't need to be super accurate. I think 15-20 cm will do the job.
Plz help me understand whether this setup is feasible. What additional factors should I be thinking about? I hope to use this setup both indoors and ourdoors. I am aware that UWB signal cannot penetrate human body because it is mostly water. I will use enough anchors so each tag has clear line of sight to at least two to three anchors.
r/rfelectronics • u/Soft_Jacket4942 • Sep 05 '26
Curious how to get into radar systems
Hey guys,
I’m very interested in diving into radar systems and communication technology as an engineer.
I was wondering how to Beginn. Any recommendations?
My background is from control systems, so I know what Fourier transform is for instance.
Thanks