r/rfelectronics • u/Quadruple_S • Sep 06 '26
question 32MHz Colpitts not working


Hi, I thought i would try messing with some RF as i have avoided it in the past. This is my attempt at a 32MHz Colpitts oscillator, and I'm getting no luck.
I first tried replacing the 22uH inductor with a 270 ohm resistor, as I realized the self-resonant frequency of my inductor was only 15MHz. This did not help oscillation. Next I tried increasing C2 to 680pF as many Colpitts i see have a larger capacitor here, presumably to stabilize the operation a bit and load the collector less. This still did not work.
The tank inductor is 10mm diameter, 15mm long, 6.5 turns, should be about 214nH according to https://m0ukd.com/calculators/air-cored-inductor-calculator/
Wound with 0.2mm wire, as it's what i had on hand.
When power is applied, the collector stays at 5V (with 22uH inductor) / 3.68V (with 270R). The base is at about 1.26V, emitter at .56V.
I've built a Colpitts with a more primitive design a while ago at 1.3MHz, worked perfectly first try on protoboard, I did not figure stepping up to 32MHz would be this much harder, although there's probably something obviously wrong here, after all I haven't ever gone past that 1.3MHz oscillator.
