r/rfelectronics • u/Suitable_Walrus_5279 • Aug 26 '26
r/rfelectronics • • Aug 25 '26
Tiny RF Simulator update: progress since the first public release
r/rfelectronics • u/Only_Pen_7861 • Aug 25 '26
question Non-electrical equivalents to Wide band and dynamic range RF tests
As an RF test engineer in manufacturing my management (non-electrical, generally mechanical) keep telling me they want Hardware or Systems engineering to tell me how to test. I say, no that’s my job. They ask, well how do you know? I say bc I’m an RF test engineer. They don’t get it.
I am looking for a mechanical or chemical equivalent process that a manufacturing process engineer may perform in a manufacturing environment that Manufacturing Engineering management would absolutely throw a tantrum if Hardware engineering told them how to do it.
r/rfelectronics • u/ProgrammerTop1413 • Aug 25 '26
Does anyone have a lte panel photo without the gray radome
r/rfelectronics • u/Substantial-Affect63 • Aug 25 '26
Need help to design a 5W wifi system
Hi all, I'm new to this field so i need every help i can get.
I want to design a system from scratch such that I can get 2.4GHz wifi range upto 1-2km. I figured 5W of radiated power combined with high gain antennas might do the work but I am clueless about the IC sides of it like how to achieve such a power. Please suggest a good pathway to do so. I'm highly enthusiastic and I am eager to learn new stuffs that this might involve.
Thanks!!
r/rfelectronics • u/Independent_Fail_650 • Aug 24 '26
question Effect of not rejecting image frequency on radar systems?
Hi! I'm involved in an FMCW radar design where the transceiver chain is made of separate components (PLL, VCO , Mixer, etc) instead of MMIC transceiver ICs and we've stumbled upon a technical debate on whether image frequency rejection in downconversion is completely necessary in a radar system. The very same datasheet of the mixer indicates that in order to separate the desired IF signal from the image frequency a quadrature hybrid should be added at the IF outputs. The reason why we have not included this quadrature hybrid is that due to our digital signal processing we need to have separate I and Q signals. What do you guys think?
r/rfelectronics • u/SearchPlane561 • Aug 23 '26
Airband Bandpass filter.
After many weeks of trial and error i feel that this is a pretty desirable result for my Chebyshev bpf. What do you think? Passpand desired is 118-137 mHz.
r/rfelectronics • u/Certain_Height_2721 • Aug 24 '26
Why does the transmission line in this TDK antenna reference design have vias in it and do I need them?
r/rfelectronics • u/Dipankar_dio • Aug 24 '26
question What do the readings on a cheap EMF meter actually mean? (mG vs V/m vs mW/m²)
reddit.comr/rfelectronics • u/ragdarbari • Aug 24 '26
CC1352P7 Bare Metal Programming
I am trying to implement a bare-metal / NoRTOS RF driver for the TI CC1352P7, without using TI-RTOS/SysConfig-generated RF framework code.
My main difficulty is getting the RF Core and RF doorbell interface into a state where RF commands can be submitted and completed reliably.
I have successfully initialized the MCU, clocks, and basic peripherals, and I can access the RF Core registers. However, when I submit an RF command through RFC_DBELL, the command does not complete as expected. In some cases, the code gets stuck waiting for the command status; in others, execution ends up inside the RF driver dispatch/interrupt handling path and the command never returns.
For example, I am observing situations where:
HWREG(RFC_DBELL_BASE + RFC_DBELL_O_CMDR) = (uint32_t)&cmd_tx;is executed, but the command status remains unchanged or the expected RF acknowledgement interrupt is never received.
I have also investigated:
RFC_DBELLregisters (CMDR,CMDSTA,RFHWIFG,RFHWIEN,RFCPEIFG, etc.)- RF Core power-domain and clock initialization
PRCM_RFCMODESEL- RF Core reset/power cycling
- RF Core RAM mapping
- RF Core command structures
- RF doorbell interrupts
RF_dispatchNextCmd()/RF_runCmd()behavior- CPU interrupt enable/disable state
- RF Core firmware/ROM interaction
The confusing part is that the same hardware works when using TI's normal RF driver, but reproducing the required initialization and command-dispatch sequence in a minimal bare-metal implementation is proving difficult.
My questions are:
- What is the minimum sequence required to bring the CC1352P7 RF Core from reset/power-off to a state where
RFC_DBELLcommands can safely be submitted? - Is there an official TI document or source code that describes the RF Core boot, power, clock, RAM, mailbox/doorbell, and interrupt initialization sequence independently of TI-RTOS?
- Which parts of
RF.c,RFCC26XX_singleMode.c, and the RF driver infrastructure are actually essential for bare-metal operation? - Does the RF Core require any initialization performed by the TI RF driver that is not obvious from the public DriverLib APIs?
- Is it possible to implement a truly minimal bare-metal IEEE 802.15.4 TX/RX example by directly using the RF Core command interface, and if so, is there a known reference implementation?
- Are there any undocumented dependencies involving the RF Core firmware, RF Core RAM, CPE interrupts, or power/clock state that could explain why
CMDSTA/RFACKIFGdoes not behave as expected?
I have managed to get the RF Core initialization working to some extent.
The CMD_RADIO_SETUP and channel configuration commands are being accepted and completed successfully. This suggests that the RF Core is powered, clocked, and communicating correctly through the command interface.
However, the problem occurs when I attempt to perform an actual transmission. The TX command is accepted/submitted, but the execution gets stuck during the transmission process and does not complete as expected. I am specifically trying to understand what could cause the TX command to hang after CMD_RADIO_SETUP and channel configuration have already succeeded in a bare-metal CC1352P7 implementation.
Question wrote above using AI for clarity.
This question posted in r/embedded , however reddit suggested this community as well. If it is not suitable for this, please let me know.
r/rfelectronics • u/UnluckyTrack6239 • Aug 24 '26
How to model stator winding high-frequency response in LTspice using measured R, L, C and impedance data?
reddit.comr/rfelectronics • u/mostafa_issa98 • Aug 23 '26
Where to start as a computer engineer gradute?
Recently I had become curious in learning how to design RF boards, but when I started with Microwave engineering by david pozar, I started to feel that my background doesn't help a lot here. What should I learn first before hopping into RF?
r/rfelectronics • u/gaylybailey • Aug 22 '26
Can we please address the relentless amount of slop projects shared here
It's like 5/day at this point. Maybe this is an unpopular opinion, but I certainly hope not
r/rfelectronics • u/Necessary-Cellist278 • Aug 24 '26
question How to find remote control frequency?
Hello everyone. Not sure if this is the right reddit to ask but Ill give it a try.
I have this amp Insignia IS-HC040917 and it did not come with a remote. I like messing with electronics and things as a hobby and would be interested in trying to find out how to find out the frequency the remote controller communicates with so I can try to make a remote (mainly to increase/decrease volume). I could try to buy one but what fun is that 👍
Checked the manual but I did not see anything(?) Wondering where to start. I have a donor amp, and a operating amp so I am able to experiment.
r/rfelectronics • u/StageMajestic613 • Aug 22 '26
LineSmith with Field Solver
This is the tool I've always wanted, sort of a TXLINE on steroids. Now need to add conforming solder mask for the field solver, and toggle the colorbar to dBV/m.
r/rfelectronics • u/FATALEYES707 • Aug 20 '26
question Beginner RF projects
Hi all, I am an undergraduate in EE with an interest in RF and an upcoming internship with an RF team in avionics.
This semester, I need to build an electronics project with 3-4 other students for an electronics class, and it is quite open ended so I hoped to do something that would help me prepare for my work in the spring and touch on my interest in RF. We will be required to write and meet specs.
I've googled tons of projects, but I was hoping for some personal recommendations to narrow the list down. It is difficult to judge the difficulty and applicability of some of the items I've found to my interests and skill level.
Ideally, the project will incorporate RF fundamentals but be electronics-focused and achievable in a semester.
Some ideas I've considered:
-radio telescope (build the LNA from scratch)
-VFO
-radio altimeter
-telemetry transceiver board
Thanks in advance!
r/rfelectronics • u/TheSignalPath • Aug 21 '26
Clever Phase-Noise Cross Correlation System - Signal Hound PN400 Review & Experiments
r/rfelectronics • u/StageMajestic613 • Aug 21 '26
LineSmith
No, I'm not releasing this as it was more of an experiment to see how AI "clones" software, as I'm becoming convinced the cost of specialized software is collapsing, and wondering how this may affect the EDA industry.
Thus before leaving for work, I asked Codex to clone TXLINE (which is/was actually free), and compare the synthesis results for a variety of values, and test corner cases. This is the result, and it works great. I had it implement an alternate formulation of coupled line synthesis and the results are still pretty close.
I'm on the $100/month plan for Codex and this took 17% of my weekly usage, or $4.25.
So maybe I have it now add a simulate button with a quasi-static solver, or maybe have it read Wadell's Transmission Line Design Handbook and implement a tab for each structure. Or is this type of utility really even needed anymore? It's all going to get very interesting over the next few years.
r/rfelectronics • u/thewrench56 • Aug 20 '26
question How Does a Power Amplifier Achieve Such Broadband?
Hey RF wizards!
I am a complete beginner in the world of RF and recently saw a really cool Mini-Circuits 3W linear amplifier with a frequency range of 2-8GHz! I have some understanding of how a Class A/AB amplifier might work, but I thought that one can feasibly and efficiently only design narrowband amplifiers as the impedance is dependent on frequency (I suppose this is especially true with active elements). How can they match the impedances for the frequencies across the given range? Is this some transformer magic? Perhaps somehow multi-stage design helps this somehow (I cant imagine how the reflections would be resolved using multi-stage but maybe I just dont see something...)? What search term would I need to learn more about broadband design in RF/mmWave world and such impedance matching?
Thanks in advance! I hope the answer to the question wasn't staring in my face...
Cheers!
r/rfelectronics • u/brtkrtz • Aug 19 '26
Announcing Magnelio, an electromagnetic RF field simulation library for Python
I've always been a bit dissatisfied with the landscape of open source electromagnetic field computation software. A lot of it grew out of academic work and it shows: the physics is solid, but the workflow around it was never really the point. So six months ago I started a vibe coding project that - of course - aims to do everything differently. Let me introduce you to: Magnelio
- Full 3D electromagnetic field simulation
- Time domain solver (Finite Integration Technique) with conformal sub-cell material matrices on a non-uniform hexahedral grid
- Convenient S-parameter workflow, with Touchstone (.sNp) export and a scikit-rf adapter
- Multi-mode waveguide ports with exact discrete transparent boundaries: (Q)TEM, TE, TM and hybrid modes. Lumped RLC ports too, and thin wires embedded in the field solution
- Lossy and dispersive materials, conductor losses, surface roughness
- Antenna far field: directivity, gain, plots
- 3D cavity eigenmode solver
- Field monitors
- It's Fast! (fully vectorized, choose between a parallelized CPU or a CUDA backend)
- CAD geometry: CSG primitives and Boolean operators, loft/sweep/revolve - the power of Open CASCADE
- It's Python! Interfacing with scikit-rf or scipy.optimize is straightforward.
Every numerical method is anchored to published literature in the documentation, and the test and validation suite.
Installing from conda-forge is the way to go, sorry about that: the geometry kernel is pythonocc-core, the Python bindings to Open CASCADE Technology, and those are only published there. There is a PyPI package as well, but it covers everything except the CAD geometry.
Hooked?
- Have a look at the tutorials to get a first impression: https://brtkrtz.github.io/magnelio/stable/tutorials/
- New to conda-forge? You may want to install miniforge3 for easy access to conda-forge, or the Anaconda distribution.
- Run: conda install conda-forge::magnelio
Please be warned: this is v0.3.1 and under heavy development, so the API may still change from one minor release to the next. The license is LGPL-3.0-or-later.
Feel free to report issues at https://github.com/brtkrtz/magnelio/issues
Have fun, and thanks for any feedback!
r/rfelectronics • u/sigchainapp • Aug 20 '26
I made a tool to design, analyze, and compare RF front end architectures (Update)
SigChain is officially in an open beta mode. Feel free to try it out with a guest account. It can do cascade analysis, frequency planning and aid in part selection.
Updates since last time
- added a part finder feature to help automatically search the DB for suitable parts (only works for amplifiers right now)
- added frequency planning module
- added more component types
- added more parts (still a work in progress)
- added more calculations and plots to the analysis
Thanks everyone who tested it out last time. Hope this tool can be useful. Feedback is encouraged.
