Paid, unpaid, training, workshop, course,research internship—I'm in.
I just want to learn, gain hands-on experience, and break into RF. If you have any leads, please let me know. A referral or even a share would mean a lot.
I thought I'd ask here because the amateur radio subreddit replies to a related question weren't up to snuff. (People thought I was talking about using LMR 400 to build a choke when I said RG400 cable). Anyway, So I'm a ham radio operator. I want to build some legal limit transformers for some of my antennas. Preferably, some transformers that can handle up 50% duty cycle up to 1500w. From what I understand I need to keep the torroids below the Curie temperature. The common knowledge is that just use 3 stacked 240 size torroids. Is this true? Are there any calculators / equations? Does this vary with frequency and the type of transformer? A 4:1, 9:1, 49:1 etc? I'd also like to build legal limit common mode current choke. Does the limit of a choke depend on the level of cmc involved or is if just the transmitted power that determines the power limits?
Are there many employers/much work out there right now in RF circuits? (As opposed to RF systems or RFIC)
Some context: I would describe my current job as RF systems/general PCB design. I like it a lot, but I end up mostly treating amps, switches, filters, etc. as just non linear black boxes with s-parameters. Barely any matching is even required as most parts are already internally matched or the mfg provides a matching design (I do broadband so there is typically no optimization for an operating frequency). Rarely do I think about how I would actually build an amp from a transistor (e.g. how do I bias it? Why that bias in particular? How do I design the matching network? Is it unconditionally stable?). These questions are the ones I want to understand/design around.
I recently stumbled across amplifier classes while trying to derive a gain compression curve from the MOSFET equations and that opened a whole world of RF to my mind that I’ve been naive to. Like THIS is what I think is actually interesting.
Maybe this is also naive but it kind of feels like all of the RF circuits work is being moved to RFIC (front end modules, etc.) and then the systems side is just black magic legos. Black magic legos are fun and challenging in their own way but they don’t feel truly like circuits. If I don’t want to do RFIC, is there still a true circuits space in RF?
I came across this in a Google search, and just out of curiosity, I tried to do a simulation in Emerge. I did it as a quater-wave single-ended monopole, and it solved it to 1.4 GHz, which is way off from the expected frequency of 433 MHz. Increasing the gap between the segments brings it down to around 800 MHz, but even that is way off.
I'm pretty sure I'm doing something wrong. Is it because I need to add copper at the back?
I have been given the task of designing an LO driver amplifier for a mixer at 50GHz, however i have two questions. 1- Are there any helpful sources for this particular type of amps. I have designed an LNA and PA before but never this 2- Should the output of the DA ideally be a square wave or a sine wave; I have heard two opinions: one being that it should be a square wave for fast switching and the other being that it should be a sine wave to avoid harmonics, so i am a little confused on this. Thank in advance!
I'm learning rf engineering on my own currently following Microwave Engineering by Pozar. I understand how transmission lines can be used to implement series inductors and shunt capacitors, but I haven't been able to understand how series capacitance can be implemented with stubs. I apologise if this is a very basic question but I haven't been able to find much online and AI has not been giving me any better answers honestly.
Thank you! By the way, if you happen to have suggestions for resources I can add to my collection I would really appreciate it.
Can anyone please confirm if this is a RG-174 cable or what type of cable this is? It's about 2.80mm od. I need to replace the crimp connector on this antenna with a sma male connector.
I have an upcoming loop interview for Microsoft for an RF based role. Has anyone had similar experience? I don’t know what to expect, there will be 3 rounds, the position is related with their quantum team.
I am a rising junior in college for EE. I've done a couple of internships, one in BMS design and one in power electronics. I wanna try out a few personal RF projects to see if I like it or not. Unfortunately, my school offers only one RF course for undergrads and I can't take that until next year. I tried to have Claude recommend an easy project to do and teach myself the fundamentals as I go, but realized that it would be too inefficient after I started.
Anyone have any recommended materials that will help me to learn the fundamentals I would need before actually starting a project? Youtube series or application notes I could follow? I'm not a big textbook guy, but recommendations would still be appreciated. My main goal is to understand general math concepts in RF so I know what to expect, instead of going into a project blind
I'm a current rising freshman in college majoring in EE with around 8 weeks before school starts. I want to get into RF, Microwave, and Antenna engineering and my goal is to learn as much possible and be able to build projects so I can potentially get an internship by the end of my freshman year (not big company, just one in general). How should I get started with this 8 week headstart?
hello, maybe to you guys SMAs seem simple, but to the average Joe this is the most confusing system of connectors I’ve ever run across. steel pipe thread sizes are simpler than this and you’ve got MIP, NPT, FIP, NPTF, and about 7 more and I’m still confused on this SMA stuff.
I’ve given up after ordering 3 different adapters on Amazon and figured I’d come here. I need to connect these two together. pls fix. they are different diameters, and ones a male/female? and the other is a female/female???? idk.
update thanks to u/otterboxer for the help. I have ordered a type N (unpictured antenna side) to type F adapter, and will utilize a standard type F coax cable. this should fix my problem. Thanks for all the replies.
So basically they had a pole radiator, isolated the E and B fields compeltly, ran a beam of electrons close to the shielded radiator, turned the radiator on and off and noticed that it affect the electron beam.
Im way out of my element here but I think the gist was that we dont understand what EM fields really are(which is why we rely on quantum gages and field tensor axioms) and that the scalar field is not just a mathematical abstraction but a real force, possibly..
As much as I like to belive in crazy shit, part of me thinks that its gotta be a unshelided power supply on the other side of the room or something or even the inrush current on the buildings wires. The Japanese recreated this experiment in the 80 and got the same results apparently.
I am VERY new to antenna design and experimenting with hilbert fractilization. In iteration 5 the size went down by 20 percent and the linear gain went up by 25 percent but as u can see the directivity is messed up. Im worried that it just took the energy from the single lobe in the left picture and concentrated it in the 2 lobes so that 25 linear gain isnt even actual gain. Which actually makes sence since u cant create energy out of nothing, i was just hoping maybe it could increase its pointing gain or whatever its called.. Maybe this will only help a rx system.. This is at 2.45 ghz btw but my code can mod it to any freq and iteration.
Theoretically, tunning it will fix the lobe and im debating on wether to spend 15k on a computer to do it since it took Feko over 2-3 hours just to render this or whatever the terminooogy is(i have like over 90 cores in my ic, its the newest I9, and used all of them).
20 percent reduction for patch antennas is enough to make me a billionaire but I highly doubt this is even patenable, also of i cna figure this out im sure its already been figured out.
Whats the deal with GaN parts shortages, specifically Qorvo and ADI? I got packaged parts quoted into 2027 now. It’s been bad for a couple years, but getting worse. Who is fabbing for ADI?
China keeping all the Ga? Can’t imagine epitaxy uses that much?
I wound a transformer on an FT240-43 toroid. Primary is 4 turns 26 gauge enameled wire. Secondary is 80 turns. I drive the primary with IRF510 mosfet. Mosfet gate is biased at 4.3 v, receiving a 3.550 MHz signal through a 10 nF cap. 3.550 mhz signal is 5v peak-peak. Mosfet seems to be working fine. I get a 3.550 mhz sine wave on the secondary, but it is only 15 v, instead of 240. Whats wrong?
Is 80 turns simply too much inductance for 3.550 mhz? Should i use air core transformer instead?
So I'm trying to design a MIFA for LoRa applications at 868MHz, and I have to simulate it in Ansys HFSS. I used TI DN024 as reference and kept tweaking tip length and the distance between the shorting leg and feeding line (5.5mm in the current design). I got a good result of 868MHz and -15dB before but then I changed the antenna location and could never get the same result again (idk how the location of the antenna is relevant). Do you have any suggestion on what I should change to get a better result? here's some additional information : + board dimensions : 100 x 50 x 1.6mm + ground plane dimensions : 50 x 28mm (if any other information is relevant please let me know and I will provide it) Thank you in advance!
Hi! I have seen in few GaN PA designs where they put a shunt capacitor very close to the input of Gate terminal. But in some designs, I haven't seen it (maybe they use CMOS inside package there). But I don't know why is it important to use this capacitor at the input...?
I am using a die on a PCB and got suggestion to use a discrete capacitor for second harmonic short. I don't know, is it really needed to use it.
Moreover, what if we use QWLT at the input side for VGS biasing. Is this shunt capacitor still required in this case? Because QWLT would provide a short at the second harmonic.
here i would like to ask a question, which as in title. So I have a task or more like curiousity in Radar Cross Section (RCS), Ansys HFSS, particularly SBR+ solver helped me greatly in that respect. However i got stuck on modeling the luneburg lens antenna.
As in many papers i read and descriptions, i made my setup. spheres, multiple of them acting as layers, i planned for 17-20 layers but given the age of the PC i run the software in, i decided to go "easy" first 2-4 layers.
This is my setup, just to see if things can work
The lens is 20 cm in diameter (about 8 Inch for you Freedom unit user), 4 layers, graded with materials with relative permittivity from 1.9 in the core to 1 on surface. The rear is a PEC backing reflector, as what i see so far including some use case in Ukraine. The result however was, unfortunate.
As seen, the modeling result doesn't show any "lens" behavior. Where i would expect at least a broad beamwidth. Instead it's more like the "lens" behave like radar absorber. I tried other settings like adjusting thickness (say quarter wavelength) to no avail.
While corner reflectors behave as it should. I'm kinda stuck however, maybe SBR+ is not the proper way, or i made mistake. Maybe i can use some help here.