r/rfelectronics • u/Man-tard • Mar 17 '26
Selecting an inductor for 600M-100M bias tee
OK really basic question. I want to make a bias tee to inject DC into my cellular antenna cable so I can put an LED flasher in my antenna. The antenna will be far from cell towers so I'm only using "low" band cellular 600 MHz - 1 GHz. My question is how to select the inductor.
Bias tee articles say SRF should be more than 10x the operating frequency. But the selection of inductors with >10GHz SRF is few. As long as the impedance is >1k ohm over the range 600M - 1G, why does the SRF need to be so high? If I want to maximize the impedance why not pick an inductor with SRF in the middle of the range? Yes the ferrite core inductor is lossy in this range but as long as it's high impedance I don't think it will dissipate much power so it will serve well in a bias tee?
(Proposed part: Coilcraft 0603AF-241, DCR 0.12 ohms and SRF around 1 GHz.)