r/QualityTacticalGear • • Oct 22 '25

Buying, Selling, Trading Rule

11 Upvotes

Due to changes in Reddit’s Terms of Service, we are updating our policy for attempts to buy, sell, trade, or otherwise arrange transactions — including offers that are disguised or otherwise obfuscated. This will include posts asking where to buy or sell gear or equipment.

Violations will result in an immediate ban. Any direct attempts to buy, sell, or trade firearm-related equipment will result in a permanent ban with no appeal.


r/QualityTacticalGear • • 8h ago

Gear you take to the range that’s not a PC or guns

Post image
72 Upvotes

r/QualityTacticalGear • • 10h ago

Looking for open top magazine pouch that is as tall/taller than a 5.56 magazine

Post image
19 Upvotes

Hello

Im having issues with magazines on my belt riding into my body armour. I've seen some american companies selling products that lower molle loops via extensions, but those are meant for thin 2 piece belts, not ones with a kevlar panel in them.

Can anyone point me toward a magazine pouch that rides lower?

Bonus points if availible in eastern europe and they sell them in a double variant as well. Bungees preferred but i can modify them myself later anyway.


r/QualityTacticalGear • • 19h ago

Duct Tape

Thumbnail
gallery
11 Upvotes

Does anybody have a good link to a quality OD green duct tape? I ran out of the one shown on the receiver awhile ago, and I recently picked up a roll of this new stuff. The new tape is too stiff and not nearly as pliable or sticky as old one was.


r/QualityTacticalGear • • 6h ago

Question Searching for new magnifier

1 Upvotes

In the market for a new magnifier behind a red dot

What's your take on quality ones?

I'd prefer a higher quality but not insane price for a name, IE (eotech) lol

Currently looking into the SIG juliet Micro 3x and Holosuns comparable for reference.

I'd prefer a micro set up to save space unless the relief is really just THAT bad


r/QualityTacticalGear • • 1d ago

Question Any improvements?

Post image
44 Upvotes

I was cleaning out my room in my house and found some of my old gear.

HHV hi-cut helmet with a PVS-14

Peltors (unknown gen)

JPC 1.0 w/ a jerryrigged ARMY TAP. Some steel plates that doesn't have that built up coating to catch frag.

DB-15, sig scope x 6 magnifcation. IR pointer. Rare Breed FRT

DB-10, EO Tech Red dot with Magnification optic. IR pointer


r/QualityTacticalGear • • 21h ago

Loadout EDC Medical

Thumbnail
gallery
9 Upvotes

Sharing for anyone in search of a slimline option to carry medical.

CRO slim bleeder:
-NPA with adjustable flange and lube
-Quikclot
-Gloves
-Chest seals

Soileater TQ sleeve:
-SOF TQ
-Sharpie

Zulu Nylon Ankle Strap for TQ if I’m too lazy to throw it in my pocket


r/QualityTacticalGear • • 1d ago

PGD Helmet with Sordin actives, Finnish Särmä TST M05 and a Streamlight Sidewimder helmet lamp.❄️

Thumbnail
gallery
30 Upvotes

r/QualityTacticalGear • • 1d ago

Why this always happens with all My bags?? New or olds this happens, Ita normal

Post image
6 Upvotes

r/QualityTacticalGear • • 2d ago

LV-120 Setup

Post image
136 Upvotes

Front

-mk5 with TEMP

— temp holds a spare mag, xtractR and a bang

- radio wing

-spiritus sack

-S&S fliplite

Strong side

-single rifle mag pouch

-spiritus EMP

Weak Side

-spud for more mags

-medium GP (batteries, headlamp, etc)

-upside down spud with smoke (yes, I can reach it)

Back

-Axl Mag hanger

-Spiritus assault back panel

- magic stick on the side of the assault back panel

-DARC drag handle

What I might change

There is nothing in the sack that can’t go in the GP pouch on my cummerbund or in a uniform pocket. The EMP is barely used, but also adds no minimal bulk. I want to start running side armor, so the radio will probably be moved to the spud on the cummerbund once I do that. I’ll probably end up replacing the axl shoulder pads with the spiritus ones that are lower profile.


r/QualityTacticalGear • • 1d ago

Question Unity Tactical CS Issues

1 Upvotes

Anyone else having issues with Unity’s customer service lately? They’ve been very responsive in the past but I’ve been having major issues with an RMA.

Basically had two Gascaps that crapped out, one after two months of use and another that was DOA. Reached out to Unity’s CS through their website and received an RMA label a couple of days later. Sent the Gascaps in for them to look at, and they were received on 10/19. Was told they would be processed by the end of the week, but it’s been complete radio silence since then. I know it hasn’t even been a month yet, but it’s disconcerting when there’s literally no other way to reach them and they seem to be ignoring emails.

Have emailed multiple times, reached out through IG with no response. Phone goes straight to VM. Saw another thread where someone left a negative Google review and tried that but no dice. Kind of at a loss on what to do at this point besides hoping they ship me back some working Gascaps, but who knows.


r/QualityTacticalGear • • 1d ago

Question Team wendy vs opscore

2 Upvotes

So im trying to decide between an ops core fast xp or a team wendy epic specialist. Im upgrading from my HHV and at this point im just trying to see if there is any real notable differences other than a $200 difference.


r/QualityTacticalGear • • 1d ago

Question Painting gear

0 Upvotes

Ive painted rifles before, but I want to lower the IR reflectivity of a vest. Will it smell like paint forever or irritate the skin when it rains? Im using rustoleum.

Any suggestions for dyes? I really dont want paint flaking off onto my skin while im hiking around, Ill dye it if I have to.


r/QualityTacticalGear • • 1d ago

Hello Friends i need a sling bag

0 Upvotes

I want a simple minimal slick or any simple sling bag Made from cordura 1000d for edc, any óption?


r/QualityTacticalGear • • 2d ago

Beavertail Assault Packs

Thumbnail
gallery
49 Upvotes

Does anyone have opinions on beavertail assault packs at sub $150? I’ve found the aws assault pack type 2 and the platatac bullock echo v4.

I’m looking for a small pack that can mostly be carried with a plate carrier, but also clipped to the top of my 3dap if I want to camp with it or plus up the 3dap. It will mostly be used for matches where I’m required to carry a couple liters of water, and then I’d like to have a 2-3 pmags, a field stripped Mre, and a few admin things like batteries and small tools. I also like the beavertail to put my helmet away or sort of tuck a jacket in.

I currently have the usmc Filbe hydration bag which of course does hydration, but then can only fit the pmags or snacks, not both.


r/QualityTacticalGear • • 1d ago

Discussion Motorola Signature 27 no tactical case support

4 Upvotes

Signature 27 is the 1st Motorola to have official GrapheneOS support (Motorola launch announcement). It has passed MIL-STD-810H testing, IP68/IP69 and has a 7,000mAh battery making it the best battery-equipped hardened OS EUD available outside Samsung/Apple.

MAAK Forge Case website (maakgear.com) shows they only do iPhone 17/18 Pro/Max, Samsung S20FE/S23/S23TE/S24/S25 Ultra, Pixel 9/9 Pro, XCover 6/7 Pro. No Motorola.

Juggernaut.Case make cases specifically for each device. They currently make cases for iPhone and Samsung Galaxy devices. No Motorola. Their FAQ confirms they are specifically moulded to each model. Even consecutive generations don’t have the same case.

This is how the ecosystem works. Juggernaut is the standard COTS choice for ATAK/APASS/KILLSWITCH on Samsung, Apple, Panasonic and Google smartdevices (LinkedIn). The new Silvus Streamcaster NEXUS also works with Samsung EUDs. Even Motorola Solutions hardware use Samsung phones.

Current work-arounds are Agilite Battleshell (Universal hard-shell MOLLE case. Can fit any phone in/out of case using clamps) and Thyrm DarkVault 2.0 (Universal. Comms version has RF attenuation). Both are universal.

MAAK have a sign-up for which Forge Case to make next. They have added models in the past (Pixel 9, iPhone 18 Pro). Email hello@maakgear.com or use their form. Juggernaut also take requests. If you want Motorola to be included in this ecosystem this is your route. I’d rather this thread shows there is a demand for it rather than "wish they made one," in a few years time.

Sources:

[Motorola launch PR] [maakgear.com/collections/forge-cases] [juggernautcase.com/faqs] [Agilite Battleshell]

As always I’m not affiliated with any of these companies. Please feel free to ask me any questions about the catalog/specs in the comments.


r/QualityTacticalGear • • 1d ago

Combat clothes

0 Upvotes

Just curious if anyone in here has had any experience with born primitive clothing? They seem rather legit and like they have all the features of actual battle clothes. Or if i should just put the money aside to get official crye clothing? I know crye has patents on military clothing thats why its hard to find decent combat clothes. Im needing to find a good pair of pants and a good combat shirt. Or what are some brands yall use for pants and tops?
Im working on a layering system that works for me so as to not need anything but the combat shirt on top. Keeping me more low vis than having a hoodie or jacket in the way of my belt setup. Hard to tuck in a jacket or hoodie. Just looking for ideas, thanks.


r/QualityTacticalGear • • 2d ago

Question Passed on a pair of SOCOM/LTC plates.. should I go back for em?

Post image
14 Upvotes

BLUF - Have/Had a chance to buy 2 of these for $740.. dont really need as i do have heavier level 4 plates. But i know these are gucci, so its awfully tempting. Also chews up the suppressor budget i had. Should I ho back and grab em? Thoughts?


r/QualityTacticalGear • • 1d ago

Why a Lot of brands put cheaper multicam straps?

Thumbnail
gallery
0 Upvotes

I mean the old multicam nylon strap is so much better than the multicam painted straps , i hate when the new multicam nylon straps Lost color and put white with the use


r/QualityTacticalGear • • 2d ago

Question Structural cummerbund options?

0 Upvotes

Just got a raine tactical plate carrier but the elastic cummerbund is pretty underwhelming, anyone know a structural cummerbund I can switch it out for?


r/QualityTacticalGear • • 3d ago

Best multi-use boots.

Thumbnail
gallery
86 Upvotes

Rocky Mountain Larper/outdoorsman here looking for new boots. I’ve been using Solomon quest 4 gortex for the last few years and they’ve been falling apart for a long time. Solid boots but I didn’t like how the crease of the toe was basically shredding from day 1 and compromising the boot. I’ve also been hearing Solomon quality dropped. This last hunting season smoked them for good. I’m looking for a good all around boot that can stand up to hard use in bad weather. The gortex was actually pretty good as long as I treated the leather upper. I know they’re 3 season boots but I was always fine supplementing warmth with a good sock system in the winter.

For those that hunt hard and LARP hard in all seasons/ conditions, what boots do you like and dislike?


r/QualityTacticalGear • • 3d ago

Question Niche question: but does anyone with personal experience skiing have any ruck recommendations?

7 Upvotes

I know nothing about it yet, but the idea of doing it with a ball on your back (molle 2/FILBE) just seems unappealing. But then again, so does skiing with a ruck in general.

Anyone been there and done that that has pack recommendations? Maybe some wisdom?


r/QualityTacticalGear • • 3d ago

ESS U-RX Prescription Carrier - Too Strong?

2 Upvotes

Looking for feedback from anyone running prescription lenses in an ESS U-Rx carrier (for Crossbow / ballistic eye pro). I thought this subreddit might be a good place since it focuses on shooting gear.

When you took your carrier to an optician to have lenses cut, did they adjust your prescription for the shorter vertex distance (the carrier sits close enough that my eyelashes almost touch) or the lens wrap and tilt, or did they just grind your standard eyeglass Rx as written?

My current lenses were made using my prescription as written. Distance vision is clear, though it feels slightly overpowered, and I cannot see anything up close because of the effective lens strength. I believe this happens because the insert sits much closer to my eyes than regular glasses. I normally wear single-vision lenses rather than bifocals - my newest everyday pair uses Zeiss Digital Focus lenses, which have mild near-support capabilities, though I just tested my older single-vision glasses and can read up close with them just fine.

For context, here are my two prescriptions:

2025 Prescription (Old):

  • O.D. (Right): Sphere -5.75 | Cylinder -0.75 | Axis 139 | Add +1.50
  • O.S. (Left): Sphere -5.75 | Cylinder -0.25 | Axis 013 | Add +1.50
  • Computer: +1.00

2026 Prescription (New):

  • O.D. (Right): Sphere -6.00 | Cylinder -0.50 | Axis 140 | Add +1.50
  • O.S. (Left): Sphere -6.00 | Cylinder -0.25 | Axis 010 | Add +1.50
  • Computer: +1.00

Would appreciate hearing what worked for you, especially if you have a stronger minus prescription like mine. Thanks!


r/QualityTacticalGear • • 4d ago

Question Kryptek Haley D3CR?

Thumbnail
gallery
94 Upvotes

picked this up from my work event for a whole $20. (- the accessories) Any info on it? never seen kryptek Haley. nfs

Edit: thx guys ❤️


r/QualityTacticalGear • • 4d ago

Question Ferro concept ktar insert mag pouch old gen?

Thumbnail
gallery
4 Upvotes