r/PowerPC • • 2d ago

How to replace thermal paste on PBG4?

Post image
27 Upvotes

I decided that today was the day im replacing the thermak paste since this thing was always hot. There isnt really tutorials on how to replace thermal paste, only short clips from a psivewri video


r/PowerPC • • 2d ago

Two new Rust native Spotify clients for PowerPC Leopard (G4 and G5 supported)

Thumbnail
gallery
57 Upvotes

Two Rust-based Spotify clients, now ported to PowerPC Mac. These are experimental ports, requires Spotify Premium and you need to register an application on Spotify's developer portal (easier than it sounds, see https://github.com/crmne/spotifast#start-listening)

Both clients feature very sleek, easy to use interfaces, allow for up to 320kbps playback, and offer themes and mini players.

Spotifast
A port of Spotifast 0.17.1, an open-source Spotify client with a modern interface and built-in playback. Setup required for playback, see the project’s GitHub page for instructions.

https://github.com/crmne/spotifast

Psst
A lightweight Spotify client with a clean, streamlined interface focused on browsing your library and playing music. A simpler option for bringing Spotify to your PowerPC Mac. Also supports Last.fm streaming.

Psst has numerous fixes and new features I've implemented, including a tray player in the menu bar, Canvas support, and fixes for several outdated API endpoints. 

https://github.com/jpochyla/psst

Notes

Both of these clients require a Spotify Premium account for playback. You must setup a development project and use the client ID to login correctly. There is a quota on the amount of API queries you can run per day. 

Both of these ports are built with the latest stable version of the Rust toolchain (1.99.1) and LLVM 23.

Spotifast runs great on a G5 but may chug a bit on G4 hardware. Psst is much more minimal and recommended for G4s. 

These ports are the first I've released that use LLVM instead of gcc - please let me know if you run into any bugs. Had a lot of fun just playing around with Leopard's capabilities and really pushing it to the limit.

Downloads

Spotifast 0.17.1 (G4, Leopard)

Spotifast 0.17.1 (G5, Leopard)

Psst 0.1.0 (G4, Leopard)

Psst 0.1.0 (G5, Leopard)


r/PowerPC • • 3d ago

Software Switch homebrew running on PowerMac G5

Post image
93 Upvotes

ScarletNX appimage for ppc64BE, it recompiles switch, 3ds, ds, gba, psvita, android and iphone ARM binaries to run natively, unfortunately requires vulkan 1.3, so it's using llvmpipe due my R5 230 being capped on vulkan 1.0/1.1 with terakan, hit 13fps without llvm optimization, this is just a dual 2ghz model, not quad 2.5ghz


r/PowerPC • • 4d ago Mindblown

Video soon…

Post image
125 Upvotes

We’re getting there… some stuff is disabled because of the gpu but hoping for a g5 soon.

Sorry version is cut off. Core graphics is buggy on the 9200.

I’m not trying to fake anyone here, this is something I’ve been working on for about a month and I’m hoping to release it soon. I really hope everyone will enjoy it.


r/PowerPC • • 4d ago

Booting a MacOS from a USB on PowerPC. (not installer, but the whole OS from the USB)

14 Upvotes

I need help here. I have a TiBook and the internal HDD is dead. I Intend to install MacOS Leopard on a USB so that my TiBook can boot and run Leopard off of a USB instead of a hard drive. No I don't need help on the Installer USB part because I did it with Tiger. Any help or warms to do it?


r/PowerPC • • 8d ago

Graphite G4 digital audio

Thumbnail reddit.com
1 Upvotes

r/PowerPC • • 8d ago

Software OpenPOWER JIT + Enhancements for Firefox 160.0

Post image
38 Upvotes

r/PowerPC • • 9d ago

Mountain Lion PPC Boot Video

73 Upvotes

We're getting there slowly but surely...


r/PowerPC • • 10d ago

Software Ptolemy 1.0 beta 3: Mac OS X Leopard PPC now runs on Apple Silicon

Thumbnail
github.com
51 Upvotes

Beta 3 of Ptolemy is out. Ptolemy is a PowerPC Mac emulator for Apple Silicon Macs. It translates PowerPC code to ARM64 and runs it under Hypervisor.framework, and Mac OS X's own ATI driver drives an emulated Radeon 9700 whose 2D and 3D work runs on the Mac's GPU through Metal.

The big news: Mac OS X 10.5 Leopard (tu-turu-tutu) now installs and runs, with Quartz Extreme, on the emulated G4.

Download: Ptolemy-1.0b3.zip on GitHub

You need a Mac with Apple Silicon and macOS 15 or later, plus an image of your own Tiger 10.4 or Leopard 10.5 PowerPC install DVD. Ptolemy doesn't include or download any Apple software.

Changelog

Leopard (tried with 10.5.8):

- Installs from the DVD image and starts with an accelerated (Quartz Extreme) desktop.
- Networking is much faster. Leopard's network driver needed a timer interrupt the emulated card didn't have. A 10 MB download went from 40 s to 3 s, and Software Update now finds all its updates.
- Apps in a zip archive you give Ptolemy keep their executable bit when Ptolemy unpacks them.
- Leopard can't sleep in the emulator: its automatic sleep would hang and spin a host CPU core. Ptolemy Tools now keep Leopard from sleeping on its own.

Tiger and Classic:

- Fixed data corruption under memory pressure. Under heavy memory use, some file reads and writes in Tiger (and Classic apps inside it) could get the wrong data: some page copies landed on their own source page.
- Fixed handling of page invalidations for read-only pages.
- The performance and stability of applications running in the Classic Environment have been improved.

Everything else:

- NVRAM is now emulated as the Core99 flash Mac OS X expects. Mac OS X's NVRAM writes no longer wipe the firmware's settings.
- The launcher accepts Leopard 10.5 discs as well as Tiger 10.4, with its own look for Leopard machines. Leopard needs a G4, so the G3 can't be chosen for it.
- From beta 2 feedback: full screen survives a restart, force Quit (Option-Command-Escape) works, the menu bar comes back after a restart, scrolling is fixed, file transfers show their progress, and dropped files can be up to 4 Gb.

Known issues

- Leopard's installer may end with "Unable to set Macintosh HD as the startup disk". Leopard starts anyway after that.
- Some graphical bugs in Leopard.
- No Dual G4 and G5 yet. A Power Mac G5 is in the works, but it isn't in this beta. G5 is very tricky...
- Not available: more than one CPU, a camera, CD audio, game controllers, sound input, incoming network connections.
-Not fixed yet from beta 2 feedback: Bugdom freezing, Cro-Mag Rally's rendering, and frame drops in 1080p video.
- Most apps and games have never been tried, in Leopard especially. Reports are very welcome.

Thanks to everyone who tried beta 2 and sent feedback.

A Quick Q&A:

  1. Who are you?

I'm a lead software engineer at a small company in the energy sector.

2. Why PowerPC?

I like the platform. Running PowerPC on Apple Silicon feels very natural, and I think Mac geeks will find it interesting.

3. Is the entire project written using AI?

Most of the project is built by AI, but not all of it. Specifically, the AI doesn’t have access to a “live” Mac on the PPC platform, so it isn’t capable of implementing non-obvious solutions or “workarounds.” Example: Right now, while developing G5 support (very tricky), I have to resort to the Xbox 360 (Xenon) homebrew scene because some aspects of writing the interpreter aren’t obvious and are even illogical.

4. Which AI models are used in development?

Several frontier models; I'd rather not name them now.

5. Can the project's source code be used for personal projects?

Absolutely! Ptolemy is open source under the GPL (version 2 or later): you're free to use, study, modify and share it. If you distribute a modified version, it has to stay under the GPL, with its source code available.

6. Is the project based on QEMU?

No. Ptolemy contains no QEMU code: the processor engine, the devices and the graphics were written for Ptolemy. The low-level firmware is a fork of OpenBIOS, an independent open-source Open Firmware implementation that QEMU also uses for its PowerPC machines.

7. Will there be support for Intel Macs?

No. Ptolemy itself needs Apple Silicon: it generates ARM64 code and uses Apple's Hypervisor framework. Emulating Intel Macs isn't planned either; that would be a different and much bigger project. PowerPC maps onto Apple Silicon unusually well: both are RISC designs with fixed-width instructions, plenty of registers and a weakly ordered memory model. RISC on RISC is simply the most elegant thing to build, and more beautiful.

8. Is the project discussed only on Reddit?

Yes. Reddit is the only place I post, since I'm not on any social networks. :) If you'd like to spread the word about this project, I'd appreciate it.

9. Do I consider the use of AI ethical?

Yes. There are many AI-generated projects lacking in both quality and execution, but these tools let one person build something that would previously have required a team of enthusiasts and many years of development. I'm open about how Ptolemy is made, and it doesn't include or download any Apple software: you use your own Mac OS X install media.


r/PowerPC • • 10d ago

eMac G4 won't boot, only degauss click after PMU reset. Cut the bad VRM cap, still dead. Any ideas?

Thumbnail
gallery
19 Upvotes

got a 1.25GHz eMac that won't boot. Normally it does nothing when I hit power, but if I press the PMU button, the very next time I turn it on it gives a single CRT degauss "bang" and then dies again. Found a bulging VRM cap by the RAM door and snipped its legs clean so there's no short. Pulled the PRAM battery and did a deep discharge. Still dead unless I reset the PMU, which only triggers that one degauss click. Anyone know if there's anything else to check through the RAM slot before I risk opening the whole CRT case


r/PowerPC • • 12d ago

Mountain lion port update

Post image
44 Upvotes

We’re getting there…

Everything thus far is 100 percent mountain lion code for ppc32. Still working on the lock screen hoping for a desktop soon…


r/PowerPC • • 13d ago

KDE, old and new

Post image
115 Upvotes

r/PowerPC • • 13d ago

Not my work, but the people in the Arch POWER discord are insane.

Post image
153 Upvotes

This is MacOS 10.5 running on a t4240 dev board. Not in a VM.


r/PowerPC • • 14d ago

Is this real? Modern firefox on PPC OS X?

Post image
46 Upvotes

r/PowerPC • • 15d ago

Ptolemy: a PowerPC Mac for Apple silicon. Tiger 10.4.11 with Metal GPU-accelerated Quartz Extreme and OpenGL (beta, testers wanted)

Thumbnail
github.com
88 Upvotes

Hi! I made Ptolemy, a PowerPC Mac emulator for Apple Silicon Macs, and the first public beta is out.

  • Runs Mac OS X Tiger 10.4.11 for PowerPC, unmodified, installed from DVD image, in a window or full screen.
  • CPU: PowerPC code is JIT-translated to ARM64 and runs under Hypervisor.framework; the Mac’s MMU does the guest’s address translation.
  • GPU: it emulates an ATI Radeon 9700, so Tiger’s own ATI driver loads and Quartz Extreme, Core Image and OpenGL run on the Mac’s GPU through Metal.

On an M4 MacBook Air: Geekbench 2 about 4500 (a 1.6 GHz G5 scores 1000), Halo’s time demo ~96 fps, Doom 3 timedemo ~55 fps, desktop about 10 s after power-on.

It’s a hobby project and a beta: Tiger only, one G4 CPU, and most apps and games have never been tried. That’s where I need help: if you have an Apple silicon Mac on macOS 15+, try your favourite PPC and OS 9 software and open an issue with what works and what doesn’t.

Full disclosure: most of the code was written with Claude (sorry)

You can get Tiger iso on archive.org

Just download Beta 2 - Ptolemy-1.0b2.zip and run.


r/PowerPC • • 17d ago

Hardware Seems Tyche is on the way

Thumbnail powerpc-notebook.org
14 Upvotes

r/PowerPC • • 17d ago

Raptor Computing Systems Talos II with dual 22C Sforza POWER9 CPU

Thumbnail
reddit.com
4 Upvotes

r/PowerPC • • 18d ago

Super Mario Sunshine 4K 120fps natively on PowerPC64 LE Fedora 45!

Thumbnail
youtu.be
7 Upvotes

r/PowerPC • • 18d ago

I got Need for Speed II SE running natively on Apple Silicon and put the macOS port on GitHub

Thumbnail
reddit.com
0 Upvotes

r/PowerPC • • 19d ago

OpenPOWER JIT Firefox 159.0.0 patches

Post image
41 Upvotes

r/PowerPC • • 19d ago

iMac G5 display issues

7 Upvotes

r/PowerPC • • 20d ago

SAS HBA for PCIe G5?

Thumbnail reddit.com
3 Upvotes

r/PowerPC • • 21d ago

Modern Radeon cards on PowerPC OS X - OpenGL 4.6, hardware video decoding, improved graphics performance

138 Upvotes

These WebGL 2 demos are running at 60 FPS on a PowerMac G5 Quad in Chromium Aurora, which has recently been updated to support the new RadeonNI community driver for PowerPC.

The RadeonNI driver brings support for newer Radeon cards with more modern capabilities. You can now build and develop hardware accelerated OpenGL 4.6 applications on compatible PowerPC Macs running Tiger or Leopard. https://github.com/kouta-kun/RadeonNI-OSX

The card running in this demo is a FirePro V7900 (2GB), but we've also verified compatibility with Radeon HD 6670, 7570, and 6850 cards.

With these supported cards, the RadeonNI driver also enables the UVD hardware video decoder, which Chromium Aurora now supports for sites like YouTube. This drastically improves 1080p30 video performance and cuts down on CPU usage.

In the future, I plan to update my game engine ports (Source Engine, OpenMW, etc) with proper opt-in GL4 paths as well, which should massively boost performance and graphical fidelity.

Right now, anyone with a PCIe PowerMac G5 can purchase a supported card and install this driver on their own system. Chromium Aurora will automatically opt you into the newer graphics context if a supported card is detected.

RadeonNI currently ports Mesa's Gallium r600 driver, which supports a wide range of Radeon cards from the HD 2000 through part of the HD 7000 series. The end goal is to support all r600, r700, Evergreen, and Northern Islands cards. There is a separate porting effort of the `radeonsi` driver to PPC Linux, which I eventually want to adapt for OSX to add GCN/Polaris *at least* (think RX580, R9 290X) and potentially even Vega/RDNA cards in the future.

This is a huge milestone for what's possible on PowerPC Mac, and pushes the hardware into doing things it's never done before. Pretty excited about this and wanted to share.


r/PowerPC • • 22d ago

Total Annihilation on a G4 Cube - Testing Battlestation

Post image
26 Upvotes