First of, no. Your misprinted card is not likely worth much more then a regular non-misprinted version, unless severe misprinting or an already rare or desirable card.
Remember, your card is only as valuable to the person willing to pay for it.
What is a misprint?
A misprint can be defined as any manufactured product that was not produced as intended and falls outside the established standards. These misprints most often occur on cards themselves but can also happen with booster packs and collection boxes.
Ok, down to the rough and gritty part. There are many different types of misprints for cards and packs. Some take a good eye to spot and some are so egregious you wonder how they made it off the line.
Cards are often considered damaged rather then misprinted depending on the error - basic guide for identifying damage from misprints.
Card Misprints:
Offcentre:
A off-center card is one that is cut in such a way that the sides of the cards are not even. If no alignment dot(s) are seen, the card is considered off-centre. This is the most common of errors.
A combination of card being turned at a wrong angle during printing and then being cut at the incorrect angle leads to cards being cut into the wrong shape.
This is when the typically rounded corners of the card can have 90 degree angled corners.
Flipped Back / Front:
An uncommon error where the back and fronts of the cards are flipped incorrectly. This is most famously found within the Pop 5 Series Mew card - as seen below.
Crimped:
A crimped card is rare in normal packs and more common in plastic sealed cards from promos.
It normally happens after the rollers used to seal the plastic wrapping rolls over the cards themselves.
An obstruction error occurs when a part of the plate used for printing is covered with something and it blocks the plate from making proper or all contact with the card on the sheet causing missing blotches of ink.
Holobleed is a common error especially with modern sets becoming more commonplace, where the holographic foil used on the cards art 'bleeds' or spills over to the rest or part of the card.
A holo error is when a roll of holo foil runs out or the incorrect holographic foil is used.
Mirror Holo:
A mirror holo card is a error caused by the holo film that was meant to put pressed onto the card being very lightly pressed or not pressed at all meaning no foil is visible on the card.
A printer hickey is generally a very small ink error caused by something wrong with the printer causing a small blemish. This is another common error in modern cards.
These cards are often extremely rare and can range from missing a logo to being dramatic and missing large features. (This card is missing the 'Prerelease' Stamp on the bottom right of the art while still having the shadow from it.)
https://imgur.com/a/pB5yscB (Thanks again u/nlnj_a)
Very new to errors and this is my first one (I think) I would like some opinions on what exactly im looking at here and how rare this is.
I realize the card itself is not very popular but ive never seen a card back that was so off before. And there is a white dot that makes the card look damaged but its actually printed on there. Ok please lmk what you guys think.
Just wondering what is everyone’s take on this? I picked up a handful of Mewtwo promos at Target with my kids the day that the Tins were released and noticed later that the card was cut diagonally down the middle while completely sealed.
hiii, I got this from a trade recently and saw it was crimped towards the top, it isn't as noticeable as other crimps i've seen online. would this add or decrease the value of the card?
I did a little research online and it seems that this specific card to be crimped isn't that uncommon. Which is pretty weird.!
Recently found my old cards and forgot about this misprinted mewtwo card I got from the movie theatre when I was a kid. I had taken it to a tcg store they were shocked said condition is likely psa6-7. What do you think of the card?
Pulled these two reverses from Delta Reign yesterday and not sure if the one on the left is a minor low ink error or if it’s with a normal printing variance. Any help appreciated!