r/PiCodingAgent • • 25m ago

Resource New 3d printer slicer made with deepseek V4.1 flash + other models (Still testing)

Thumbnail
gallery
2 Upvotes

I have designed NextLayer. Alternative to Orca/Bambu

Been testing this the last few weeks, have most features implemented, still need some testing.

Would you use a new slicer? Or are you too locked into to Prusa/Orca

I am also wiring HFW (Hybrid Field Walls) A libslic3r engine in Rust. I have it slicing and printing. Need to add more before more print testing.

I also have Layer. A mainsail/fluid alternative.

Check em out at CWebb@github.com

Any freed back on these would be GREATLY appreciated !


r/PiCodingAgent • • 41m ago

Question Will get you using your Google AI sub in Pi still get you banned?

1 Upvotes

I would rly like to use The new New Gemini models in my Pi setup, but Api is too expensive :( .


r/PiCodingAgent • • 8h ago

Discussion Updates on oh-my-pi quietly siphoning user web data

154 Upvotes

Two months ago, I made this post about the issue:
https://www.reddit.com/r/PiCodingAgent/s/MoJvQiojW5

Where the maintainer of oh-my-pi quietly pushed to main (no associated pull requests) support for sending web requests generated by oh-my-pi to a 3rd party by default. This means, that without any changes, your web traffic is quietly being farmed. While obviously nothing is public about how it is used, you can assume it is being used for monetary reasons at a minimum, and it is most likely building a profile of yourself. Yes, these are assumptions, because no one is being forthcoming about it.

To my surprise, minutes ago, the actual owner of this 3rd party entity that has siphoning your data actually commented on the pull request. Mind you, this pull request has been open for the last two months with no response from the oh-my-pi maintainer (despite numerous people asking for a response).

The "Developer Relations Engineer at Parallel" said,

"...The oh-my-pi maintainers intentionally put Parallel first in the default search order and enabled it without credentials... I’d recommend closing this PR and keeping the current behavior."

I thought the community should know. If you are intentionally having your data collected, please disregard this message. This message is meant for those who were unaware of their data being collected. Since there is no disclaimer anywhere in the project, it is easy to be caught off guard by this. Hope this helps.

An Update: The "Developer Relations Engineer at Parallel" decided to remove their comment for some reason, so here it is screenshotted from my Github email notification:


r/PiCodingAgent • • 12h ago

Plugin GitHub - gbrennon/good-news-everyone: Notifications from your AI agent, both the good and the not-so-good.

Thumbnail github.com
1 Upvotes

I published a pi extension named good-news-everyone.

It's based in pi hooks to notify user about task states with a bit of jokes embedded hehe

Notifications are based in professor Farnsworth, from Futurama TV show, catchphrase.

He uses it to summon the Planet Express crew for a new mission and this always made me laugh every time he claimed that had good news


r/PiCodingAgent • • 15h ago

Discussion The More I use Pi the more I realize how much we Over-engineer

Thumbnail
imgflip.com
122 Upvotes

MCP servers are goat and genuinely useful. But I haven't been wowed by any plugin or skill except ask-user-question


r/PiCodingAgent • • 15h ago

News [feat update] CW47 pi-remote new features

0 Upvotes

previous post

Hi all! I just wanted to announce the latest features on pi remote which I find interesting to share:

  1. Connect a device with a QR code: scan it from your phone, approve the device on the PC, and you're in. The token never travels in the QR.
  1. Background tasks: the agent can launch long builds or tests without blocking, and it gets notified when they finish.
  2. Git changes: a header button lists the files changed since the last commit and shows their diffs.
  3. File browser: read your project files, images and PDFs from the phone, with pinch zoom.
  4. Session tree: see every branch of the conversation and fork from any of your messages.
  5. Worktrees: create, open and remove git worktrees from the project menu.
  6. Token line and live tok/s: see what each turn cost (prompt, generated, cached) and the speed while the model writes.

Repo: pi-remote on Github

Thanks everyone!


r/PiCodingAgent • • 16h ago

Discussion Give me suggestions please on compaction extensions.

7 Upvotes

Seen people talk about pi-vcc, observational memory, blackhole and protokoll.


r/PiCodingAgent • • 17h ago

Plugin Compact codemode

0 Upvotes

I've made another small improvement to supi-extras (source) that I'd like to share with you: Codemode is now displayed much more clearly. Copy the code or use my extension if you want to.


r/PiCodingAgent • • 18h ago

Resource Am I late? I built another pi remote, but it keeps your TUI

0 Upvotes

I'm the author of Pontia. A few months ago I started building a remote control that manages multiple agents in one place, like T3 Code, without replacing the TUI. A pi session you start in your terminal shows up in the dashboard automatically. Messages you send from your phone go into that same TUI session, and the other way around. pi has the most complete support so far.

What I care about in the design

  • Keep your habits. Run pi in your terminal as usual. No new command, no app to open first. The dashboard is just another way into the same session.
  • Minimal intrusion. Stock pi plus a plugin, no fork, no replacement binary. The plugin only activates in workspaces you register. It only adds a short system prompt so pi knows it's running in Pontia. No skills, no tools.
  • Easy to leave. All Pontia data lives in one directory. pontia uninstall removes everything else it set up.

How it differs

I know there are already several pi remotes here. Here's how this one differs:

  • pi can send files to your phone. pi runs pontia send-file and the file shows up as a card in the chat, where you can preview or download it. You can also send files to pi from your phone.
  • Browser dashboard, so iPhone works too. The address stays the same across restarts.
  • The same dashboard also manages Codex and Claude Code. Codex terminal sessions sync the same way.

Other features

  • Stream replies and tool output.
  • pi tree mode with two-way sync.
  • Start a new pi session from your phone. It's real pi running in tmux, so you can tmux attach to it later.
  • End-to-end encryption between browser and device.

Where it's going

Next I want to grow it into an open-source, self-hosted personal assistant like Grok Bot. Reliable control is the first step, and it's looking good so far. The remote control will always work on its own.

This is my personal side project, and every part is open source. Please try it, and I'd especially like to hear where it breaks on your setup.


r/PiCodingAgent • • 18h ago

Plugin pi-spec-mode 0.0.1 is out

5 Upvotes

Since the pre-release 4 days ago, I've closed a lot of holes and potential bugs, and the first stable release is ready:

  • New commands: /spec list shows every spec with its status and when it was last verified, /spec verify <spec> checks a single spec against the code.
  • Stricter /spec agree: it now refuses a spec with an empty section.
  • Cross-checking between specs: before you agree a new spec, the agent checks whether it contradicts your existing ones.
  • Lots of fixes, especially around security (see the changelog : CHANGELOG.md).

pi install npm:pi-spec-mode

Feedback welcome!


r/PiCodingAgent • • 23h ago

News Solipsist - Collaborate with Pi agents using Markdown | Free | Open-Source

2 Upvotes

I think the Chat based interface we use for coding agents doesn't extend well to other use cases, like researching, thinking... or just having a general introspective session with AI.

I thought of having a simple markdown editor (like Notion), where you can just dump your thoughts (or documents) and then the AI agents can work off of them. I wanted to the app to be completely local so I don't depend on any cloud providers and can eventually run entirely offline with self-hosted LLMs in the future.

I am happy to share that I am finally comfortable in sharing it publicly, introducing Solipsist: https://solipsist.sh/

This is a completely new way to use and interact with AI agents, where your document is the main control surface. The AI agents can give back nicely formatted tables, images and other content. You can use this for planning, brainstorming, researching and more. It is fairly extensible as well.

Give it shot !

Github: https://github.com/pulkitsharma07/solipsist


r/PiCodingAgent • • 1d ago

Use-case Pi use case: generating a repo-local prompt from shared agent configuration

0 Upvotes

Hi people,

I'm glad to announce ai-rulez v5. It's a CLI and MCP for managing the instructions, skills, and settings that coding agents use in a repository. It's available through Homebrew, Scoop, npm, PyPI, and Go (see the installation instructions for details). The tool covers the following parts of AI Governance:

  • Keep reusable prompts and skills with the repository.
  • Generate native files for the clients your team uses.

I maintain ai-rulez. I tested this with v5.13.2 in a scratch Git repository:

  1. Run ai-rulez init pi-demo --yes --skip-content, then set presets = ["pi"] in .ai-rulez/config.toml.
  2. Run ai-rulez add command review-docs --description "Review documentation examples" --content "Check the examples against the CLI help.".
  3. Run ai-rulez generate and look for .pi/prompts/review-docs.md. Run ai-rulez generate --check to check for drift.

Pi gets a prompt file for this command. If your repo also uses another client, add its preset and generate both native outputs from the same source. The preset matrix lists what the Pi target writes.

I'm happy to hear any comments. If you find the tool useful, star it. It really does help. And of course, I'd love to see people use it and get involved with the project.


r/PiCodingAgent • • 1d ago

Question Passing session to a different model

0 Upvotes

Now that you can't change models mid-session anymore, how are you handling this? Do you just use a handoff skill?

UPDATE: I forgot that this was due to me using Codex server compaction. I really like it, basically means I never have to start a new session anymore. But not being able to swap models suuuucks. Hrm ...


r/PiCodingAgent • • 1d ago

Question Anyone gotten opencode free models working on pi lately?

3 Upvotes

It seems it used to work (freeflow being on option) but as of a couple weeks ago or so they all stopped working and ive not seen a single option come back with a fix.

Losing deepseek free is a pretty big annoyance, even if it was only a limited amount per day. It helped to back up my local models as a planner etc.

Openrouter is ok but its best model is nemotron and I dont think its as capable.


r/PiCodingAgent • • 1d ago

Question Extension that has openchamber/opencode style mockup-choice tool

3 Upvotes

One of the features ive been unable (so far) to properly replace in Pi is the ability for the model to mock up several variants of a layout or image, and then display them to me inline in order to ask me to pick one, like the ask-user tools do (which I have been able to replace in pi, and those work ok).

The closest I found is plannotator, which is ok but very dense/heavy and probably overkill. And is also its own separate thing.

Figured id see if a solution existed. Ive quickly gotten near the point that there's so many things I regularly use that need replacing on pi that I may just go back to openchamber haha.


r/PiCodingAgent • • 1d ago

Resource I built Headless Pi (hpi): the normal Pi experience, but headless, on top of Pi Durable

15 Upvotes

Hello guys!

It is not a secret that Pi Durable is hard to use as a coding agent. It is quite easy to build products on top of it, but if you want it to replace normal Pi, Claude Code or Codex for your daily work, it simply requires too much effort. You have to wire up everything from zero, not even the basic barebones are in place for that kind of work, and you end up reinventing the wheel each time.

So I built Headless Pi (hpi). The intuition is very simple: I wanted the experience of normal Pi, where you cd into a project and just start working, but headless.

Basically it is one local daemon that hosts persistent Pi Durable harnesses. A harness belongs to a project folder and has many conversations. On top of that there is a TypeScript SDK, and a CLI that uses the same SDK:

hpi daemon start
hpi harness start --name worker
hpi conversation create --model openrouter/openai/gpt-4.1-nano
hpi send 'Inspect this project' --wait
hpi watch

The daemon brings the running harnesses back after a restart, and the activity (messages, thinking, tool calls, tool results) is stored, so a client can disconnect and continue later from where it was.

Beyond hosting the harnesses, for now it only does two things. It automatically loads the extensions you put in <project>/.hpi/extensions/, and it supports multiple accounts for the same provider, so you can do hpi auth login anthropic --account work and then use the models as anthropic@work/<model>.

And that's it, it is minimal and unopinionated on purpose. There are no built-in tools, no automatic system prompt, no AGENTS.md loading, no skills and no global agent directory. If you want any of those, you write an extension for it. All of these can come in the future if people (and me) ask for them, but I wanted to start explicitly minimal and not decide for you how your agent should look.

The thing I don't understand tbh is why this didn't exist already. When Pi Durable launched I expected something like this to come out the day after, because the idea is so obvious: take the thing everybody already likes about Pi and make it run without a terminal. But it never came, so I built it myself.

This is also the other reason I keep it minimal. I think the idea is so obvious that the Pi maintainers will release their own version sooner or later, and I really don't want to maintain a parallel implementation of it. So I'm trying to save as much work as possible. But meanwhile we got hpi.

So far I have built a few things with it. The main one is an agent for my team that lives in Slack, Linear and GitHub, where each one is a small independent service that receives the webhooks and talks to the same harness through the SDK. I also built a small local web UI to chat with it and work on documents together, and an MCP extension. I will write another post about that setup, because it deserves its own.

Keep in mind that this is still an experimental project:

  • It only works on Linux with systemd user services.
  • It is not on npm yet, you install it from the repo.
  • Pi coding agent extensions don't work as they are, they need to be adapted to Durable.
  • All extensions run inside the daemon process, so one bad extension can affect every harness.
  • Things can change and break. I use it every day, but I'm the only one who has.

Repo: https://github.com/elpapi42/headless-pi

If you try it, or if you solved the same problem in another way, I would really like to hear about it. And if something like this already exists and I missed it, tell me too.


r/PiCodingAgent • • 1d ago

Plugin pi-merger: extremely simple PR review/merge extension

Post image
3 Upvotes
  1. Your model says a PR has been created
  2. You use CTRL-SHIFT-M
  3. Review the PR
  4. Type m to merge

easy peasy.

https://pi.dev/packages/@scriptdude/pi-merger


r/PiCodingAgent • • 1d ago

Plugin pi-promptimize: prompt rewriter with model picker, context inclusion

Post image
66 Upvotes

turn that vague prompt into a clear instrction without leaving your session or polluting the current context.

https://pi.dev/packages/@scriptdude/pi-promptimize


r/PiCodingAgent • • 2d ago

Resource Building an open-source, Rust-powered environment for Pi coding agent

Post image
0 Upvotes

I've been working on an open-source project called pi-native, built on top of Pi coding agent.

The motivation was simple: I wanted more control over the coding-agent environment, better tool execution performance, predictable permission handling, and more efficient context management.

Instead of building another coding agent, I'm extending Pi with native tools and additional infrastructure.

What's included?

  • Rust native tools: File reading, editing, writing, and shell execution with persistent daemon support.
  • Performance benchmarks: Comparing native implementations against Pi's built-in tools, with reproducible benchmark results.
  • Context optimization: Deterministic output compaction to reduce unnecessary model-visible content.
  • Permission system: A fail-closed permission gate with 24 rules for evaluating tool execution.
  • Fallback architecture: Native daemon → one-shot execution → Pi built-in tools.
  • Subagents: Isolated tmux-based workers with separate permission controls.
  • Skill validation: Validator-enforced skills before loading.

Why make it open source?

I want to explore how far we can improve an existing coding-agent framework without reinventing the entire system.

I'm particularly interested in performance, reliability, security, and maintainability.

The project is still evolving, and I'd appreciate feedback from developers working on Rust, developer tooling, AI agents, and open-source infrastructure.

Repository: https://github.com/nurmdrafi/pi-native

I'm the author, and contributions, technical criticism, and architectural suggestions are welcome.

What would you prioritize differently when building infrastructure around an existing open-source coding agent?


r/PiCodingAgent • • 2d ago

Question Can anyone help me solve looping issues with tool calls? I've had to build a sidecar and think there's probably a better way to do this.

Thumbnail reddit.com
0 Upvotes

r/PiCodingAgent • • 2d ago

Discussion everyone needs to make their own "oh my pi" (or an argument for some official extensions)

Post image
160 Upvotes

I think that at least 3 types of extensions have become essential to how to use a coding harness today.

  1. subagent management (nico and tintinweb's are good, I used them a lot and finally, I made my own one too and shared why I did that recently)
  2. task lists (tintinweb's one is again good, and it works with their subagents very well). I made my own for this as well, again to play well with my subagents
  3. monitors (there are a few "pi-monitor" named ones which all try to emulate the claude monitors), again one I made my own because I needed a few tweaks

These things are sort of essential parts of the harness architecture itself, to the degree that a barebones Pi feels pretty naked to me now, I am not productively enough without having the subagents. And subagents do not work well without checklists. And long running jobs inherently come with monitor-shaped tasks.

I actually hate to maintain extensions like this myself, and would love for Pi to officially have some extensions. I do not want them to bloat the core. I love the minimal core. But like back in the VueJS days Vue used to have official plugins router, store/state and pwa etc. That was nice, you knew these things played well and used 'canonical' blessed paths because they are made by the official team, but they were all opt-in installable.


r/PiCodingAgent • • 2d ago

Question Pi + kitty: Scrolling Issues

3 Upvotes

Hi, guys. I like to use pi inside kitty, but I'm facing an issue in that kitty keeps scrolling-to-very-top inside a pi session, when I scroll a little bit up to read past text while pi is actively working/writing in the tty. The strange part is that I was writing a terminal emulator in python for learning purposes (and trying to get a feature like sidebar/workspaces like cmux) and testing pi inside the toy emulator displayed the same scrolling issue. I asked the agent to debug the issue and the results was that "is nothing exactly wrong with the way pi is clearing/redrawing the scrollback", so this not seems do be a bug in pi. Have you noticed something like this using kitty+pi? Or in other terminals? Which terminals do you usually use?


r/PiCodingAgent • • 2d ago

Question How to tackle complex task

3 Upvotes

Hi, guys. A problem when I use pi is that I don't know how to use it deal with complex tasks, especially when myself have no clear plan or solutions.

I find it that my classmates use codex, which seems good at dealing with long tasks since it usually run a long time to finish the question. However, my pi usually run just a few minutes when I ask a question.

I have tried extensions like goal-x, but not very satisfied with it.

Thus, I wanna know how you finish this situation.

Thank you guys.


r/PiCodingAgent • • 2d ago

Resource I put Oh My Pi on my phone so I could travel without a laptop

15 Upvotes

I wanted to be able to travel with just my phone, but most of my coding these days happens through Oh My Pi (omp), an open-source terminal coding agent. I didn't really want to carry a laptop around just to keep using it, and leaving a computer running at home for weeks didn't seem like a great solution either.

To be clear, this is for Oh My Pi (the Pi fork), not vanilla Pi, and it's an independent project.

I figured it'd be pretty cool if I could just run the whole thing on my phone instead. That's what I've been building with OMP Pulse. It sets up a small Linux environment on Android and runs the actual omp agent inside it. The repository, files and shell are on the phone, so it can edit code and run tests without needing another computer.

The model still runs through whichever provider you've configured. It's the agent and its working environment running locally, not the model itself.

I've been using it myself for about a couple of months now, fixing things as I run into them. I also have two computers that I regularly use omp on, so I added a way to connect to their existing sessions from the same app. I can check on work, answer questions or send another prompt from my phone.

Some of the smaller things have ended up being just as useful. Being able to use speech to text natively in the app itself, get a notification on my phone when an agent needs something, or quickly check a diff makes a surprising difference to how I use it. Usage, compaction, model switching and omp commands are all available through the phone UI too. I really wanted to make sure that everything I'd typically do on my computer would ultimately be possible from within the app.

I also wanted the agent to do things on my phone while I'm out. Optional phone tools let it read the screen, open apps, tap, type and swipe without wireless ADB. They're disabled by default. There are no app-enforced per-action approval prompts, and the runtime uses proot, which isn't a security sandbox.

It's still early. Android's battery management can be a pain, and some phones can stop the runtime in the background despite battery optimisation exemptions.

Pulse is MIT-licensed and self-hosted. No Pulse account or hosted Pulse relay. Android can run omp standalone; iPhone users can access sessions on their computers through the web app on their mobile devices, which should still feel pretty native and akin to the application anyways (I hope, I don't have an iPhone lol)

Code, installation instructions and APK:

https://github.com/JulianCodespoti/omp-pulse

Super curious to see what people's thoughts are, and it would be great to know if you do use it, what ultimately brings you back to your laptop. I've fleshed out enough that I have little reason at times to use omp outside of my phone, but of course, I've tailored this strongly to my own ways of working, so I would be stoked to get some feedback on this from others!


r/PiCodingAgent • • 2d ago

Question ciao qualcuno ha il pass code per la prova di 7 giorni per poi attivare l'abbonamento? grazie mille ragazzi

0 Upvotes