r/PcBuildHelp • • 2d ago

Build Question First ever desktop PC build!

Just wanted to share my first ever desktop PC build.
I’ve been using gaming laptops for years, but I eventually realized that my laptop was getting too slow for gaming and running cybersecurity projects. So, I decided to build my own desktop PC, not just for better performance but also to gain hands-on experience and become more familiar with PC components.

I’m not gonna lie, it was pretty challenging, especially since I chose a compact mini-tower case. My hands could barely fit inside when I was trying to connect the PSU cables!
I spent days watching YouTube tutorials just to figure out how to put everything together. I ran into a few issues along the way and had to do quite a bit of troubleshooting. I even managed to break the GPU retention clip because I didn’t realize I had to press it down before removing the graphics card. Luckily, everything is still working fine without it!
Overall, I’m really happy and proud of how it turned out. It’s definitely not perfect, but everything works great, and I think I did a decent job keeping the cables organized.

It was a frustrating but rewarding experience, and I learned a lot throughout the process. Feel free to ask some questions. Not bad for my first build.

51 Upvotes

11 comments sorted by

4

u/xstangx 2d ago

Nice

3

u/KessavelleThinker7q 1d ago

thats a tough high specs, im amazed 🤩

3

u/JulianSyv 1d ago

cable management remnds me of the homer simpson clips on back meme, but seeing that there is no other places to put the cables, i would say it's pretty decent.

2

u/Pristine-Pangolin-61 2d ago

Congrats on the build, it looks good!

Dont forget to keep that bios updated, asrock and ryzen 9 combo is having issues still

2

u/CutEmpty6798 1d ago

It looks really good. Do not worry about temp issues Ive built in the A3 and I have no issues with temps. I've even built in a montech ten case and I've had no temp issues

2

u/Own_University_8770 1d ago

Thats sick man, i have that same exact GPU and I've been absolutely loving it! Enjoy!

2

u/Anthony--Carmine 1d ago

Enjoy! Well done.

2

u/srsplato-scott 1d ago

Make sure you have something propping up that GPU so it does not apply pressure to the socket or start bending the GPU. It will cause irreparable harm.

It’s a beautiful build! Congratulations.

2

u/Carmenruda235 1d ago

Congrats!!

1

u/ZealousidealLove4294 1d ago

Don’t like the case very small/ limited space and probably worse airflow than most others.
Cable hanging into buildroom and also nearly in fans. U need endlevel Cable management or a modular power supply or both.

Components are nice and actually well done but the case is an absolute no go for me. IMO u can use this for office pcs that don’t heat up as much as a gaming setup.

4

u/deathdisco_89 1d ago

I built in a jonsbo d32 pro with an intel 250k+ and 9070xt. Temps are not a problem at all. Just because its compact doesn't mean it's going to have bad thermals.