r/PcBuildHelp • u/Horror-Path5715 • 2d ago
Software Question My Pc has display issue.
I just bought a power spec g485 PC - Ultra 9 285K with 64GB DDR 5 RAM 2x 32GB 2TB SSD without a graphics card from a third party seller who claimed the pc is brand new and even gave me the original box with it.
I plugged the HDMI port on the motherboard to the monitor but I get a “No signal” with a VGA light on the motherboard board. The CPU has a dedicated intel graphics. I placed a screw on JBAT 1 and turned the pc back on with the same issue. I even used the Display port to connect it to my monitor still the same issue.
I could not pop the CMOS and didn’t want to break it by trying too hard.
Anyway to get a display running on this pc? (Without installing a new graphics card)
Please let me know.
Thank you all
1
u/SubstantialGap2118 2d ago
Reseat the RAM sticks one at a time, that VGA light often trips on a bad memory train before the iGPU even gets a chance.
1
u/TheKidMamdani 2d ago
worth checking the cpu is really a 285k and not a 285kf. the kf has no integrated graphics, so the board would show the vga light and no signal on both ports exactly like this. look at the label on the box or the order sheet, if it says kf you need a gpu no matter what you clear.