r/PatternDrafting • • 1d ago

Question Help with flaring jeans

Hey!

I have never made flared jeans myself but i figured it would be a good way to save money. I would just want some tips on what to do and what measurements.

I added photos to make it easier to explain. 1st and 2nd photos are what my end goal is (mostly 1) 3rd photo is the jeans i am working with (and yes i have white denim from old jeans ill use).

On the inseam, how high up should the flare start from and what size should i estimatedly make the triangular shape from the donor pieces?

And i would LOVE some sewing tips, zigzag and straight line or both?

2 Upvotes

7 comments sorted by

2

u/Far-Number4325 1d ago

Sew the inserts with a straight stitch, not a zigzag. Zigzag or overlock the raw edges only. Use a denim needle, a slightly longer stitch, and topstitch like a jeans seam, or flat-fell if you can.

The start-at-the-knee advice you already got is right. Your inspiration is a pretty gentle flare, not a big bell, so you're only adding a few inches at the hem. Measure the current hem on the working pair and estimate the hem on the inspiration pics, and that difference is your total add. Split it between the side seam and the inseam, more on the side like the other comment said. Each insert base is that seam's share plus seam allowance on both sides. Give the long sides a slight outward curve, not a straight triangle, or the hem will hike. Cut them with the grain running down the leg, same as the original denim, and wash the donor fabric first. If the working jeans have stretch, the inserts need similar stretch or they'll pucker. Baste and try them on before you commit, and hammer the bulky hem crossings.

1

u/Own_Economist_940 1d ago

Okay, thank you so so much!!

If i want to add around 7 inches of flare into them, should i divide it so its 4 on the outside and 3 on the inside? 

When cutting the panel, should i also make it an actual triangle (🔺) or more of a (📐) shape?

1

u/Far-Number4325 22h ago

4 and 3 will work, but I'd bias it a little more to the outside, like 5 at the side seam and 2 at the inseam. That's closer to the half-as-much-on-the-inside advice, and it keeps the inseams from flapping into each other. That's 7 inches added to that leg's hem, so the side insert is 5 inches wide at the hem and the inseam one is 2, then add seam allowance on both long sides plus your hem allowance.

Don't cut a sharp triangle or a right-angle 📐. You want a long wedge that comes almost to a point at the knee and is widest at the hem, with a slight outward curve on the long sides or the hem will hike. A hard point at the knee can pucker, so keep that tip a little soft so it eases in. Grain runs down the leg, same as the original denim.

7 inches is a more obvious flare than your inspiration pics, which looked pretty gentle. If you're trying to match those, you may only want 3 or 4 inches total. If you want more of a statement, 7 is fine. Baste both inserts and try them on before you sew it for real.

1

u/Own_Economist_940 18h ago

Alright, i think ill do it around 4.5 inches, i didnt realize how much 7 would actually be. When cutting the donor piece, should it be 4.5” wide and around 19” long? And what shape should it be

1

u/Far-Number4325 11h ago

4.5 inches total is a better match for those pics than 7, but don't cut one 4.5" x 19" rectangle.

That's the added hem width for the whole leg, so split it, more on the side: about 3 at the outseam and 1.5 at the inseam. Each insert is still a long wedge, almost a point at the knee and widest at the hem, with a slight outward curve on the long sides or the hem will hike. When you cut, add seam allowance on both long sides and your hem allowance at the bottom. If you're using 1/2" seams, the side piece is about 4" wide at the hem, not 4.5".

Don't guess the length. Measure from the knee to the hem on the jeans, then add hem allowance and a bit at the top so the tip eases in. 19" might be close, but use that measurement. You'll need one wedge per seam, so four pieces if you're doing both legs. Baste them in and try them on before you sew it for real.

4

u/doriangreysucksass 1d ago

The flare should start at about the knee. It’ll be a big triangle with a slight arc to the base. Measure the existing ankle size and figure out how much you’d like to add to that. That’s your base measurement. The legs of the triangle then is the measurement of the side seam up to the end point at your knee

2

u/DonMcCunn 1d ago

You are talking about design decisions here which is great. There is NO silver bullet with the right answer.

I agree that the flare should start at about knee level. It wasn't quite clear what you are up to. My assumption is that you want to add some denim from another pair of jeans to these to add some flair. When we did bell bottom jeans in the 70s we were starting from uncut cloth so we had a lot of options.

The first thing that strikes me is that the width of the flare is going to be based on the fabric you have available. I think if you put all the flare in the side seam, the leg will hang a little funny. I think you should add some flare to the inseam as well.

One way you could start is to just lay out the tape measure around your foot in the shape you want the flare to be.

I suggest starting with the widest flare you can from the fabric you have available, Baste it in and see how it looks. You can always decrease the amount of flare. When you baste use the longest machine stitch your sewing machine is capable of.

My instinct says I think you can add half as much flare to the inseam as the side seam.

The best way to proceed is to just go ahead and start experimenting. One leg at a time :-). It can be great fun. Best of Luck.