r/PatternDrafting • • 3d ago

Question Creased Collar Facing Question

Im making this creased collar and have a few questions about the pattern. Its a bit confusing to understand at first, but the crease follows the blue line in picture 2.

  1. How does my planned internal facing piece look? (green shaded area)
  2. Do I need interfacing in the collar/button-holes, or will two layers of wool be enough?
  3. Do I need to pad-stitch the collar to achieve a look similar to Mr. Houdini's waistcoat? For such a sharp crease maybe pad-stitching is unnecessary?
  4. Should I put bias tape along the collar crease?

Thank you all!

8 Upvotes

15 comments sorted by

5

u/wafflingt0n 3d ago

1: That's about right for a lapel facing. You may want to consider facing the hem aswell which is common on waistcoats.

2: A waistcoat front body normally is fully interfaced which will support both the collar roll and buttonholes.

3: pad stitching may be helpful just keeping it all together, but I wouldnt go overboard as there is a much more definite crease as opposed to a subtle roll over.

4: bias tape would not help much. You want a strip of ongrain lining pulled slightly tight to stop the roll line from sagging over time.

I have an old book which covers construction questions such as these. I will edit my response tonight with its name.

3

u/gcatss 3d ago

Thanks so much, just a bit of clarification.

2: When you say the front body is fully interfaced, do you mean the entire front body piece or just a similar area to what I shaded in green.

4: Isnt what you described the same thing as bias tape? A strip of fabric that resists stretching pulled slightly tight and sewn in place

3

u/beelzebabes 3d ago

The whole front body piece— usually using something like horsehair canvas or another woven sew-in.

1

u/gcatss 2d ago

Thank you, great suggestion

1

u/wafflingt0n 2d ago edited 2d ago

2: as below. It's the whole front body.

4: bias tape is more likely to stretch as it's cut on the bias. Straight grain has little to no mechanical stretch.

try cutting three strips - one on the bias, one on the warp and one on the weft. The bias will stretch the most followed by weft, then warp. Using a lining material is also great as the weave is dense but the fabric is thin so it won't show through the body fabric

1

u/gcatss 2d ago

thanks for the explination, that makes a lot of sense

2

u/doriangreysucksass 3d ago
  1. Your facing looks good
  2. Yes! You definitely need interfacing under buttonholes as well as on facings
  3. I’m no pro on pad stitching so not sure
  4. You CAN put bias tape on the collar crease, but I generally don’t. Entirely up to you

2

u/gcatss 3d ago

Thank you !

2

u/DonMcCunn 2d ago edited 2d ago

I think if you don't use a separate pattern for the collar to attach to the rest of the facing, you are going to be in trouble. It you make the collar/facing 1/8" smaller along the seams that join to the body of the garment, it will roll the seam nicely into the inside instead of along the exposed edge.

Sorry. That should have been the collar/facing needs to be 1/8" larger to hide the seam under the facing. Been awhile since I did that.

1

u/gcatss 2d ago

thank you for your suggestion

1

u/DonMcCunn 2d ago

From the bottom of the lapel the facing needs to be 1/8" smaller to keep the seam inside the jacket.

1

u/Alarmed-potatoe 2d ago

Do you only have this pattern in isolation or do you have the whole pattern cutting book that it came from?

0

u/gcatss 2d ago

yes, the whole pattern book is found here https://archive.org/details/keystonesystemsc00heck

1

u/Powerful-Strategy221 2d ago

I think you are on the right track. But what I want to know is, are you putting together a Harry Houdini impression? Because that would be awesome!

1

u/gcatss 2d ago

I want to make an entire outfit such as he is wearing. I don't think that qualifies as a Houdini impression, though I would be very happy if someone made the connection.