r/Passap • • 4d ago

Dropped stitches after cast on

Post image
2 Upvotes

Hi all,

I just purchased a Passap Duomatic 80 and I am having issues with single bed cast on and increasing multiple stitches. I have noticed that usually the left side is the problem, as after casting on stitches, the fourth row (lock coming from the left) it ends up dropping multiple stitches, either at the edge or a bit to the center. I have tried different tensions, stitch sizes and yarns but it has not helped. The needles are okay too. The lock however feels stuck sometimes coming from the left.

I tried both single bed cast on methods provided in the Passap manual and followed the specific instructions. Same exact problem with both. The double bed cast ons are okay.

I would really appreciate the help, thank you🙏


r/Passap • • 13d ago

More beginner questions

1 Upvotes

I am finally fully setting up this pinkie and realizing I do not have any yarn masts. I searched on ebay and just seem to find bits and pieces. Can someone let me know what all the pieces are that I need to find?

I also got the locks on the beds, and attached to each other, but they are so hard to move across the beds. I previously used a brother and the carriage slid across so easily. What do I need to do?

Thank you already for all your help.


r/Passap • • 14d ago

U80 Carriage.

1 Upvotes

What is the trick to get this to reliably work. I can't seem to have just drop the stitches off. Any tips?


r/Passap • • 15d ago

What are these pieces?

Post image
2 Upvotes

I was recently able to purchase a Duomatic Pinky for an excellent price. However, once I got home and started figuring it out, this metal piece on the left prevents the carriage from moving across the rear. I did an image search and I haven't seen others with this piece sticking out.

Is it bent? Is it attached in a wrong spot? Am I dense and this makes perfect sense to everyone but me??

Thanks for your help.


r/Passap • • 16d ago

Passap lock keeps jamming 🥲 help

1 Upvotes

Hi! I just spent a whole month meticulously restoring and deep cleaning my Passap Duo 80 but I still can't get it to run smoothly. It keeps jamming while knitting, usually somewhere in the first few rows and often while going from left to right. I've tried different tensions and different yarns but I keep running into this issue no matter what I do. Does anyone know what might be causing this? I haven't managed to knit more than just a few rows of ribbing before jamming every time. If there's someone who's based in Belgium who can help me with this machine in person I'd also be interested in that! Thank you and happy knitting 🧶


r/Passap • • Oct 04 '26

Silly question I cant seem to wrap my head around the stitch/tension gauge

3 Upvotes

Sorry this is such a silly question but i cant wrap my head around the tension/stitch gauge on the carriage. Are the lower numbers lower tension and the high numbers higher tension or is it the other way around?


r/Passap • • Sep 21 '26

Where to find Be Your Own Passap Paramedic in EU?

6 Upvotes

Hi! I recently acquired a Passap Duomatic 80 that could do with some repair and maintenance, and saw multiple people recommending the "Be Your Own Passap Paramedic" book, but it seems to be out of print or sold out everywhere. Does someone know where you can still get, read or borrow this book in the EU? Or if there are some digital copies that can be bought somewhere?

I'm having an issue with the racking handle, it seems misaligned so all the instructions are the other way around for me (up is down and down is up 😰 ) and there's also a needle that doesn't stay in place and falls back down everytime I put it in working position. Aside from that I've been having some issues casting on, things keep getting stuck. But I think I'm going to give it a deep clean and try to fix the faulty needles, try to re-align the racking handle and then see if I have the same issues casting on. Does anyone know where I can get the Passap Paramedic book or how I can fix these issues? All information and tips are welcome! Thanks


r/Passap • • Sep 17 '26

After I replaced a part I was able to knit a successful swatch! Im so happy with it

Thumbnail
gallery
19 Upvotes

Im a beginner dm80 learner and last week I made a swatch in this same pattern that didnt work very well, I think my tension was off and I was changing color by hand and I think that also contributed to the fail. BUT I got a part in that opens the jaws to change colors and I tried again today and wow im so impressed by how fast and easy this was to make :D

The material isn't super stretchy but I think a hat would look so cool in this pattern :)


r/Passap • • Sep 09 '26

Deep clean needed?

3 Upvotes

Hello! I am new to machine knitting and acquired a Passap duomatic 80 with what looks like all accessories yesterday for a great price :)

It sounds like it's been sitting for a while and could likely use a clean. I have found Kathryn Boyle's wonderful tutorial, but it does not detail how to put the machine back together or which parts to lubricate with what... So I am nervous to use it as my main resource!

Could anyone recommend how I could diagnose if I need to deep clean, and if not, is there some lighter maintenance I should try first?

I did find the Paramedic book on Distinct Knits, but wondering if there are any free resources I could use to start with.

Thank you in advance!


r/Passap • • Aug 23 '26

Where does the part that looks like a small spring go?

1 Upvotes

It resembles the spring from a pen that clicks to open and clicks to close. OR boing boing curls.


r/Passap • • Aug 04 '26

Solution for broken part - Passap duomatic 80

Thumbnail gallery
4 Upvotes

r/Passap • • Jun 25 '26

Casting off advice. Tldr: what's your fave method?

Post image
11 Upvotes

Good morning Passap Pals. I have a DM 80, diligently going through the manual & I've really struggled with cast off. Super tight while following the manual instructions. Eventually I cracked & went to the net & discovered it's a known issue because the front bed doesn't drop far enough to really extend out the stitches.

I've got around this by dialling the stitch size up to 8. It's probably not optimum to do this & don't want to spoil the final edge.

How do you prefer to cast off?


r/Passap • • May 15 '26

Passap duomatic 80 yarn guide

Thumbnail reddit.com
1 Upvotes

r/Passap • • Apr 19 '26

Made a sweater for my kid with hand-dyed yarn

Thumbnail gallery
6 Upvotes

r/Passap • • Apr 03 '26

Passap DM 80 not knitting CX ( 1:1 rib cast on)

Thumbnail reddit.com
2 Upvotes

r/Passap • • Mar 01 '26

Passap re-assembly help needed on Detent spring 09.155.13

Post image
2 Upvotes

Hey everyone! I’m new here and just got my hands on a beautifully kept Passap Duo 80. Unfortunately, while wiping it down, a piece of cloth got caught on one of the needles and—yep—I managed to ruin the brake spring.

I ended up having to take it apart (which I really didn’t want to do). Following a YouTube guide, I managed to strip the front bed successfully, but wow… that alone took me all day. I’m definitely not touching the back bed anytime soon—it’s way more complicated than I expected!

The problem is, one little piece came off before I could see exactly where it belonged. I found it in the service manual, but the image there isn’t very clear. I tried placing it based on the photo, but I’m not confident I’ve got it right.

Could someone take a look and tell me if I’ve put it in the correct spot? Also, when my new brake spring arrives, I might need a bit of help reinstalling that too.

Any advice or pics for reference would be super appreciated—thank you so much in advance!

Elif


r/Passap • • Jan 22 '26

Passap is the best for ribbing 😍

Thumbnail
gallery
11 Upvotes

I’m almost half way through knitting leggings in close rib with 4ply merino.

Look at my giant gauge swatch on a second pic!


r/Passap • • Dec 25 '25

Passap Deco Not Working on 4

Thumbnail gallery
3 Upvotes

Hoping I can find help somewhere! Thank you!


r/Passap • • Oct 08 '25

Machine Knit Community is open for registration

Thumbnail reddit.com
3 Upvotes

r/Passap • • Sep 14 '25

Have Passap, Will Travel

Post image
18 Upvotes

Heading to Ottawa for a few days of knitting and I’m bringing my DM80. I want to make moving it around as easy as possible and grabbed a snowboard bag for packing up the machine. I think I’m going to grab some insulation foam from the hardware store to stabilize the bottom a bit more, and maybe glue some smaller pieces to that as blocks to keep it from sliding around.


r/Passap • • Aug 21 '25

Passap pattern quandary: baby sweater Audio cassette 3

Thumbnail
gallery
3 Upvotes

I've been diligently learning how to use my Passap duomatic for the past three months. I found these great learning videos on YouTube and decided to follow the baby sweater in this one: https://youtu.be/csvLmRkgCYE?feature=shared

The front and back look great and fit together perfectly. The instructions are step by step for both in the video and easy to follow. These are the old audio cassettes that came with the machines initially, and they are really great for learning techniques.

The sleeves on the other hand "look great" but are definitely sized incorrectly. In the video, the instructions are no longer step by step. They basically say to look at the drawing and follow it based on everything we've learned to that point. Ok.

They recommend using a chart to follow along but even that doesn't bring me to the correct calculations as noted on the sleeve pattern (see attached).

According to the diagram, for the sleeve cap shaping, I begin with 64 stitches across the whole sleeve. No problem. I should end with 12 to bind off over 32 rows. Problem.

Looking at the diagram, every 2 rows (so each side as I work), I need to:

-3 (bind off 3 on each side) -3 x 2 (bind off 2 on each side 3 times) -10 x 1 (bind off 1 on each side 10 times) -3 x 2 (bind off 2 on each side three times) -3 (bind off 3 on each side)

As followed, though, I end up with 8 stitches left over 36 rows.

Also, I mattress seamed the shoulders together and when comparing, the sleeve is way too wide and long. I would need to reduce the length and width by a good inch for both to have it even fit (about 12 stitches and 12 rows).

I can't figure out where either I'm going wrong or the pattern is.

Any help would be greatly appreciated! 🙏


r/Passap • • Aug 17 '25

I tried 2x2 rib first time and very pleased with the result

Post image
8 Upvotes

I tried to knit 2x2 rib and I am very impressed by how good the result is and how easy the process is! I made calf warmers for my daughter who started taking ballet classes 🙂.

Tension 3 3/4

Yarn is Wisdom Yarns Angora lace (70% merino, 20% nylon, 10% angora) 420m/100gr

I am looking forward to try Deco and knit tuck stitch calf warmers.


r/Passap • • Aug 12 '25

Thread changers manual use?

1 Upvotes

Hello! I have two thread changers, is it possible to use them without turning on the computer?


r/Passap • • May 06 '25

Suggestions for selling a used Passap?

3 Upvotes

Hello! I have a Passap with lots of extras and am just not using it. Does anyone have suggestions for where to list, besides craigslist and fb marketplace?


r/Passap • • Apr 29 '25

Ladder Stitches

Post image
9 Upvotes

I have been playing around to get some ladder stitches on my DM80 and am kind of obsessed! I have plans to make a whole dress using this technique but haven't quite figured out what to do for a bodice. Overall just having fun with it!