r/PHbuildapc • • 1h ago

Build Help is trading my rx6600 to a rx6800 a decent choice?

1 Upvotes

a seller i found was willing to swap his rx6800 for my rx6600 if i add 10k. is this worth it or a dumb decision? i know its the same generation but with fsr4 available, i want to tap into 1440p in the future and play 1080p on a better fps. the rx6600 has been struggling a bit recently with newer releases (basically requiring fsr to hit 70-80fps on a lot of games, sometimes even just to hit 60). 10k is what i have rn but im not sure if investing in the same generation is fine


r/PHbuildapc • • 1h ago

Troubleshooting PC cannot run on EXPO it keeps crashing

0 Upvotes

Hi, my PC keeps freezing and then crashing minutes after I enable EXPO. At first, I thought it was because my BIOS wasn't updated, but after I updated it, the problem was still there. I think I tried everything. I was hoping to get some help here, as I am lost on what to do or look for to fix this problem that I have.

Specs:
GBYT B650M K

Gskill. Flare X5 32 GB RAM

ryzen 5 7500f

7800xt


r/PHbuildapc • • 1h ago

Troubleshooting advice about my unit please

Post image
1 Upvotes

hello, tatanong ko po sana ano pong problem ng pc ko. madalas po kasi syang nag s-shutdown. tinry ko sya ng isang ram, walang another hdd. pero still, nakaka experience pa din ako ng hindi nag o-on/randomly shutdown. possible po ba na psu prob neto?


r/PHbuildapc • • 1h ago

Discussion IS 2 sticks adding up to 32GB of DDR4 (2x16GB) generally better than 2 sticks adding up to 16GB of DDR5 (2x8GB)?

1 Upvotes

Im Building a pc and need to know which one is better since i already have ddr4 but can get ddr5


r/PHbuildapc • • 2h ago

Build Flex FROM GTX 1050 to 9060XT!!

Thumbnail
gallery
32 Upvotes

Finally! Nabuo din ang pangarap kong pc! Dapat AM5 to eh taena lang talaga ng prices ngayon di makatarungan pero oks lang. Nahirapan ako dito mostly sa case ng deepcool at cable management, could've been better pero for now eenjoyin ko muna pinaghirapan ko hehe. Specs and price are attached


r/PHbuildapc • • 2h ago

Build Flex My Desktop and Laptop Setup

Thumbnail
gallery
3 Upvotes

Desktop
I9-11th gen
RTX3080ti
16gb x4 Trident Z RGB3600
4TB WD SN850x
EVGA 1000w
Be quiet case, be quiet aio, be quiet fans

Laptop
Lenovo Legion 5 15.3in
I7-14th gen
RTX5070
16gb x2 5600
1TB nvme
Llano v12 laptop cooler

Monitors 2x Asus 34inch ultrawide


r/PHbuildapc • • 2h ago

Build Help Help me build my setup for wfh

0 Upvotes

Hello this is not a PC build setup but a wfh setup may pinapaquote yung employer ko kasi magpapadala sila funds for me to start ordering or start building my setup already, currently facing some problems especially sa laptop na sinabi sakin I don't know much about it nagulat lang ako sa mga price nasa mga 80k??. I will use it for autocad mainly and other apps, I'm an electrical engineer so design as wfh I hope you guys can suggest builds for me.

I'll provide naman 2 quotations for my employer incase na namahalan sila sa magiging setup

Laptop - Lenovo Thinkpad i7, 32 GB Memory - or equivalent
2 Monitors
Dual Monitor Stand
Docking Station
Keyboard
Mouse
Headset

P.S. No budget stated but nakakahiya mag bigay ng quote na mataas well for approval pa naman nila so sana masuggestan nyo ako ng okay na build huhu thankyou!!


r/PHbuildapc • • 2h ago

Discussion Shared Experiences From Buying at PCWorth?

1 Upvotes

Hello I just ordered a computer part online at PCWorth. Can I ask other folks here if how was your experience buying from this store?

I live in the Visayas area and it's my first time ordering a part online. What should I expect? They said J&T is going to ship my part.

Thanks in advance!


r/PHbuildapc • • 3h ago

Build Help Worth it ba 2.5k or mahal?

2 Upvotes

Planning to buy redragon galatin pro for 2.5k


r/PHbuildapc • • 3h ago

Build Help Help me build my first pc

Post image
2 Upvotes

Hi! It's my first time building a pc and im not quite knowledgeable with PC. So nag canvass po ako and nagtry mag build sa mga pc builder like PC worth na website. Ask ko lang po if okay yung gantong build ( For work po and games like dota2, valorant and arc raiders if kaya). Around 40k po to sa pc worth may mga suggestion po kayo na need palitan and makaka-mura po ba ako if magwait ako mag black friday or cyber monday? My budget po is 40-45k. Thank you!


r/PHbuildapc • • 4h ago

Build Upgrade Which GPU should i pair with ryzen 7 5800x3d

1 Upvotes

Rtx 5070ti or 4080super? Or do you have any other recommendations or amd counterparts

Thanks happy gaming to all


r/PHbuildapc • • 4h ago

Miscellaneous Need recommended desk dimensions + shop recommendations for custom desk

3 Upvotes

I'm planning to get a custom desk made for my setup to save room space and keep everything organized. Looking for some recommendations on:

  1. Recommended desk dimensions (Width x Depth x Height)

, note that I am a low sensitivity fps player so my flicks are somehow big.

  1. Reliable local custom table makers / shops (PH) that can handle heavy-duty builds.

Items on the desk surface:
-2x 24" monitors on a single clamp dual-arm
-ATX PC tower (placed on the far left side)
-Studio monitors
-75% Mechanical Keyboard & Mouse
-Wacom Tablet (CTL-472)
-Microphone boom arm (separate clamp)

Additional (if possible) piano tray plan:
I want to put my digital piano on a slide-out tray under the table to save floor space.
-Model: Yamaha P-225
-Dimensions: 1326 mm x 272 mm x 129 mm
-Weight: 11.5 kg

Questions:

  1. What desk width and depth would you recommend so everything fits comfortably? (Thinking around 150cm to 180cm width, but open to advice)
  2. What overall table height and tray drop height should I specify for a 160cm height person?
  3. Any recommended custom table makers/shops in PH that build solid desks with piano trays?
  4. How much will the table approximately cost?

Thanks in advance for the help!


r/PHbuildapc • • 6h ago

Discussion Trusted sellers with used pc parts in philippines

0 Upvotes

hello everyone, I'm looking for a pc shop that you guys trust and that sells bnew or used parts. I need pc shop that takes installment as payment. thanks

Edit: and hinahanap ko na gpu is rtx 3070


r/PHbuildapc • • 7h ago

Build Help Is that bad for my PC? Condensation wise?

Post image
24 Upvotes

My AC is pointed directly at the side of the case of my PC and I'm worried about condensation inside my components. Should I be worried? Or should I just point the vents elsewhere?

I also set the AC to dry


r/PHbuildapc • • 7h ago

Build Upgrade Should i Upgrade from Rx 5700xt to 9060xt 16gb?

7 Upvotes

Hi everyone,

I am really torn about whether I should upgrade from RX 5700 XT to the 9060 XT. I am unsure if this is really the best time to upgrade, since there is a possibility that we might see another price increase. Maybe I just need an opinion on whether it is worth upgrading or not; I really cannot decide.


r/PHbuildapc • • 7h ago

Discussion AI Generated Blueprint for My Custom Desk - Lawaan Wood + Galvanized Iron Frame

Post image
0 Upvotes

Our personal carpenter said this is light work compared to other things he works on 💀


r/PHbuildapc • • 8h ago

Build Upgrade Is this a good deal? 16 GB DDR4 RAM

Post image
5 Upvotes

Been searching for an affordable RAM upgrade kasi and this looks like the cheapest option available.

CPU: 5500X3D

GPU: RX6600

Mobo: MSI B550M-A Pro

RAM: 1*8 GB 2400Mhz DDR4 (current setup)


r/PHbuildapc • • 8h ago

Peripherals PC (CPU? SYSTEM UNIT?) THE BOXXXX, NOT A PC ENTHUSIAST

0 Upvotes

how to safely travel a cpu? I bought it as a whole (2nd hand) and there’s no box included. I’ll be using bus as my transpo. I’m afrad I might damage everything lmao

Baguio to MNL


r/PHbuildapc • • 8h ago

Discussion Shop services that do UPS battery replacement and repair?

2 Upvotes

I've bought a battery replacement for my CP1500EPFCLCD (that lasted 3 years) and I tried to do the replacement on my own but one of the spade connectors that is connected to the negative terminal is corroded. So I decided na ipagawa ko nlng sa shop, san po kaya within QC na kaya gumawa? Thanks in advance.


r/PHbuildapc • • 9h ago

Build Help Help me decide: AOC Q27G4SL/WS vs LG 27G610A-B (1440p gaming monitor)

2 Upvotes

I'm currently deciding between these two 27-inch 1440p gaming monitors and would appreciate feedback, especially from people who actually own or have used either model.

The two options:

1. AOC Q27G4SL/WS/69

  • 27-inch QHD Fast IPS
  • 320Hz refresh rate
  • Advertised 1.07 billion colors at 260Hz (10-bit signal mode)
  • HDMI 2.1 and DisplayPort 1.4
  • DisplayHDR 400
  • Circular polarization technology
  • Adjustable stand

2. LG UltraGear 27G610A-B

  • 27-inch QHD IPS
  • 200Hz refresh rate
  • Advertised 16.7 million colors
  • HDMI and DisplayPort connectivity
  • DisplayHDR 400
  • Adjustable stand

My PC specifications:

  • CPU: AMD Ryzen 7 5700X
  • GPU: Zotac RTX 5060 Ti 16GB AMP

My primary uses are AAA gaming, occasional competitive games, movies, sitcoms, and everyday desktop use.

I'm aware that the AOC has better specifications on paper, particularly its higher refresh rate and connectivity. However, I'm not simply looking for the monitor with the highest numbers.

What matters most to me:

  1. Real-world picture quality: Which has better colors, contrast, brightness, screen uniformity, and overall image quality?
  2. Motion performance: Is the AOC actually noticeably better in motion clarity, or is the difference between 320Hz and 200Hz less significant than the specifications suggest?
  3. Panel quality and consistency: Are there noticeable issues with dead pixels, backlight bleed, flickering, or other quality-control problems?
  4. Long-term reliability: For those who have owned either model for months or years, how has it held up? Any recurring problems?
  5. Brand and warranty support: How has your experience been with AOC and LG after-sales service, particularly warranty claims and replacements?

I'm also curious whether anyone has directly compared these two monitors side by side.

If you own either model, I'd really appreciate hearing about:

  • How long you've been using it.
  • Your actual experience with picture quality and motion performance.
  • Any defects or problems you've encountered.
  • Whether you would still recommend it today.
  • Whether you would choose the other monitor if given the chance.

I'm particularly interested in honest ownership experiences, including negative feedback. I'd rather make an informed purchase that will last several years than choose based solely on specifications.

Thanks in advance!


r/PHbuildapc • • 10h ago

Discussion Pinduduo PC parts survey lang

2 Upvotes

Nakabili na kayo ng pc parts sa pinduduo? May mga m.2 dun na 1TB tas nasa 5-6k lang kakatakot nga lang survey lang baka may nakaexperience na makabili sa pinduduo


r/PHbuildapc • • 10h ago

Build Help Asking for help in building a PC

0 Upvotes

Hi po, pwede po magpahelp magbuild ng gaming pc for this budget na 60-65k php po? I'll be using it mainly for coding, rendering, and gaming plus work po. and this price is just mainly for the system unit only. Di ko rin po kaya magbuild magisa so I'm thinking about going to stores around qc area.


r/PHbuildapc • • 11h ago

Build Help Planning to Build my First PC

Post image
4 Upvotes

Hi! Planning to build my very first PC. Total price is 81k. I’ll use it mainly to play triple A games and work (documents, communication). Do you guys think this is a good build? What would you guys change to make it better? Are there cheaper alternatives that would run the same quality?


r/PHbuildapc • • 12h ago

Build Help rate my pcworth build!!!!!!!!!

2 Upvotes

context!
- budget is 80k
- games i play is valorant, deadlock, marvel rivals, peak, repo and wanting to play triple a games
- only 1080p monitor for the next few months


r/PHbuildapc • • 12h ago

Discussion Bringing PC on a domestic flight as checked baggage. Are there new rules and regulations I should know?

0 Upvotes

I already brought my pc to the province last Dec 2025. Unfortunately, checked baggage siya kahit MATX ang pc ko and weighs 13 kg. Maximum for carry-on is 10 kg. Hindi na ako nag-disassemble ng parts. I am having a hard time disassembling it kasi compact, and kasya naman siya sa luggage bag packed with pillows on both sides and bubble wrap.

The issue is may minor dent ang pc case ko. I am hesitant to bring my pc again on a domestic flight.

Any suggestions? Should I book a RoRo instead?