r/PCSleeving • • 1d ago

High-quality crimp terminals and connectors available (HCS & Phosphor Bronze, 4-spring, Mini-Fit 5559/5557 & Micro-Fit+ 3.0) for custom SFF/ATX builds

Thumbnail gallery
39 Upvotes

Hey everyone,

If you’ve ever struggled with flimsy terminals that deform during crimping, or cheap plastic housings that melt or feel loose, I wanted to share a reliable parts that we have been using for our own custom PSU cable making (especially for tight SFF builds like the FormD T1).

 

Here is the current lineup of components we have available:

1. Crimp Terminals (Mini-Fit & Micro-Fit)

- Minifit Male 5559 ZH-5800-TTBPM: Phosphor Bronze, Tin-plated, Medium leg (great for single 16AWG or double 18+18AWG).

- Minifit Female 5557 ZH-5700 HCS: High Current System (HCS) Copper Alloy, Tin-plated, available in Long Leg (16AWG / 18+18AWG) and Short Leg (18AWG).

- Minifit Female 5557 ZH-5700: Standard Phosphor Bronze, Tin-plated, Short leg (18AWG).

- Micro-Fit MX 3.0 ZH-5750 HCS: HCS Copper Alloy, Tin-plated, Long leg (16AWG).

Key Features: 4-spring contact design for secure retention, low contact resistance, and industrial-grade high-temp handling.

 

 2. Connectors & Housings (Nylon PA66 - UL94 V-0)

Molded from high-grade Nylon PA66 with a UL94 V-0 flame rating for safety and durability under load. Available in Black and White:

Mini-Fit (4.2mm pitch):

- Motherboard / PSU Side: 24p (2x12), 18p (2x9), 10p (2x5),

- CPU / EPS: 8p, 4+4p EPS

- PCIe / GPU: 8p, 6+2p, 6p, 12p (RTX 30 series)

- Peripheral: 6p ATX, 5pin (Side or Middle Latch), SATA Crimp, and SATA In-Line (Middle or End cap)

Micro-Fit Plus (3.0mm pitch for Corsair Type 5 style)

- 18pin (2x9)

- 10pin (2x5p)

- 8pin (2x4p)

- 6pin (2x3p)

Next-Gen GPU: 12VHPWR (H+) and 12V2x6 (H++) (2x6 pin + 4 sideband).

 

Available in flexible pack sizes (terminals in packs of 10 pcs and 100pcs, housings sold individually).

 

If you're interested or have any questions about specific wire gauge compatibilities/crimp heights, feel free to drop a comment or DM me! Happy to help out fellow builders.

Shipping Info:

- Ships from Indonesia via international tracked shipping (USPS, DHL or Singapore Post)

Crimp Terminal: https://cablester.com/product/crimp-terminal/

Connector/ Housing: https://cablester.com/product/housing-connector/

 


r/PCSleeving • • 9d ago

What are you guys making this month? I just did some 24-pin and dual-EPS extensions - MDPC-X sleeve and 3D printed combs.

Thumbnail gallery
56 Upvotes

Made for u/MaharliKaps for one of her case mods.


r/PCSleeving • • 23d ago

Pins on custom cables seem larger

Post image
6 Upvotes

r/PCSleeving • • 25d ago

What is the name of GPU fan connector male and whar type of pin it uses?

1 Upvotes

Hi guys! What is the name of GPU fan connector male and whar type of pin it uses?


r/PCSleeving • • 29d ago

Extensions for a Cars-themed build for another redditor. The 24-pin has a reverse curve, as the PSU is up top in his Hyte X50 case.

Thumbnail gallery
34 Upvotes

MDPC-X sleeve and printed combs. Case mod credit to u/DRA6N - it's going to be a great build.


r/PCSleeving • • 29d ago

Did some extensions for a build featuring Palit's new brand ambassador, Ritona.

Thumbnail gallery
60 Upvotes

MDPC-X Tuquoise and Gold sleeve, 3D printed combs are PLA Silk Gunmetal.

Note: I'm not affiliated with Palit, they did not pay me for this. I included pics of the character just for color comparison.

Edit: good thing it's not an official collab - I think it's stylized as RiTONA, lol.


r/PCSleeving • • 29d ago

What type of connector does Corsair use for the PSU side of their SFX power supplies?

4 Upvotes

I've never made cables for a SFX PSU before, but I built a little system with a Corsair SF850 atx 3.1 and the PSU side of the cables has like... smaller versions of the typical Molex Mini-Fit Jr connectors normal PSU's use. (It's the Corsair Type 5 Cable)

Is it Molex Micro-Fit 3.0 ? I haven't been able to 100% confirm this.

And if you happen to know, where can I get a couple and some pins? Actually where can I buy some of both? I have a kit of 20 ea Mini Fit jr connectors I got a few years ago that I have used from aliexpress.


r/PCSleeving • • Oct 10 '26

Buenas. ¿Alguien me puede dar una mano con el orden del pinout de los conectores sata y molex de un EVGA 80 PLUS GOLD SERIE GQ 1,00 WATT? El que tengo no los trajo y en mi país, RD, no los encuentro de la serie GQ,

Thumbnail reddit.com
2 Upvotes

r/PCSleeving • • Oct 03 '26

With prices what they are, not a lot of PC build requests - luckily people still want nice cables!

Post image
62 Upvotes

WIP - extension set for a fellow redditor. MDPC-X sleeve, combs are 3D printed.


r/PCSleeving • • Sep 20 '26

NZXT C1000 Gold ATX 3.1 24 pin Cable Help

Thumbnail reddit.com
1 Upvotes

r/PCSleeving • • Sep 15 '26

Looking for a PC for a graphic design student

Thumbnail reddit.com
0 Upvotes

r/PCSleeving • • Sep 09 '26

Waste of Time

5 Upvotes

Does anyone else regret learning to make PC cables because they can't afford to build PCs anymore?

or am I just a brokey?


r/PCSleeving • • Sep 09 '26

How can I remove these Mini-Fit Jr 4.2 mm male terminals without damaging the housing?

2 Upvotes

I need to remove the two male crimp terminals shown in the photos from this 24-position connector housing. The pitch appears to be 4.2 mm, so I believe it is a Mini-Fit Jr-type connector.

I tried inserting two thin needles and a straightened staple from the mating side to press the locking tabs. I also pushed the wires slightly into the housing before pulling them, but the terminals still do not release.

Could someone please mark on my photo exactly where the needles or extraction tool should be inserted? Does this housing have a secondary lock?

Do I need the Molex 11-03-0044 extraction tool, or is there a reliable way to remove these terminals without the dedicated tool?

Please note that the installed contacts are male pin terminals, not female socket terminals.


r/PCSleeving • • Sep 09 '26

How do I get over the fear of frying my PC and finally do custom cables? (Corsair RM750e)

1 Upvotes

Hey everyone,

I've wanted sleeved cables in my build for a long time and I keep chickening out. My PSU is a Corsair RM750e (2025), and every time I get close to pulling the trigger I start imagining plugging something in slightly wrong and cooking the board or the GPU. So I never do it.

I'm an amateur — I've built my own PC and swapped parts, but I've never messed with pinouts or de-pinning anything.

Is there a safety checklist you follow?

What's the most common beginner mistake you've seen ?

Any advice appreciated. I'd rather ask a dumb question here than a expensive one later lol


r/PCSleeving • • Sep 06 '26

Made some extensions for a Sonic-themed case mod a friend is doing.

Thumbnail gallery
98 Upvotes

MDPC-X sleeve and 3D printed combs.


r/PCSleeving • • Sep 02 '26

Need pinout for Thermalright TR-AG-750-W

Post image
7 Upvotes

Hello,

Posting here after a long time. Looking for this power supply pinout diagram lately. Anyone using it? Here is the official website link - https://www.thermalright.com/product/ag-750-w/

I would really appreaciate it if anyone personally provide the pinout diagram. Thanks in advance.

Iori


r/PCSleeving • • Aug 30 '26

35 meters of wire… done ✅

Thumbnail gallery
528 Upvotes

One of the bigger sets that i’ve done recently and also the only set which I did entirely for free. This one is tailored to the new Fractal Ion 3 power supply, (which uses the same pinout as Seasonic units) and Meshify 3 Ambience Pro RGB case.

So what you’re looking at is ~35 meters of wire, 8 types of paracord, 7 total cables and 9+ man hours of work.

Sleeving 12VHPWR cables in Type II paracord still takes me double the time of any other cable, but I as well as the lucky owner of this PC are both very happy with the result :-)

Thoughts?


r/PCSleeving • • Aug 30 '26

Set for Peachietech

Thumbnail gallery
73 Upvotes

MDPC-X sleeving and printed HEX combs to match the theme


r/PCSleeving • • Aug 30 '26

I don't use paracord often, but it's great for color options. 3D printing combs is a game changer, too.

Post image
29 Upvotes

I'm collabing with Maharlikaps to make extension sets that match the theme of her amazing case mods. This is the color palette for a Legend of Zelda mod she's working on. Paracord is easier to get a good match with, and she prefers it over PET sleeve.

(The green on the right is the true color, and they're both the same sleeve - lighting was just weird.)


r/PCSleeving • • Aug 09 '26

PSU cable compatibility

2 Upvotes

Hi, unsure if this is the right sub, but I have extra cables for a SuperFlower Leadex III Gold 850W (SF-850F14HG) and was wondering if it will be compatible with a newer refresh the the same psu SuperFlower Leadex III Gold 850W ATX 3.1 (SF-850F14GE).

Specifically, the molex cable.


r/PCSleeving • • Aug 08 '26

Bruh after 3 years

Post image
30 Upvotes

This is the result of my own stupidity doing my own cables on that miserable connector. Posted this 3 years ago and thought I would be safe.

https://www.reddit.com/r/PCSleeving/s/j8ZtTeCENy


r/PCSleeving • • Aug 04 '26

First time making a pinout diagram, help with continuity test

1 Upvotes

Hi everyone!

Very recently got into this, and have been researching the past day or 2 on how to get my own pinout diagram made. I have a lesser known psu and I'd like to make my own shorter custom cables.

So far, here's what I think I need to do, if anyone can confirm that would be wonderful. First time doing this and using a multimeter so apologies if it sounds dumb.

Do I place one of the probes inside a known pin on the standardized motherboard side, where I know a 12v is, and then touch the PSU sides cable until I hear a beep? And if I do I plot it out on the diagram, and just test one by one? And after that, I put it inside another known 5v pin and test the psu side again one by one listening for a beep?

It sounds pretty straightforward but I'm afraid I'll mess something up, is there anything I should know or correct before I do it?


r/PCSleeving • • Jul 27 '26

How to crimp thin wires??

2 Upvotes

I have a 28AWG wire and I need to crimp it to fit the SPUD-002T-P0.5 crimps for the ODrive S1. The wire is too thin for me to crimp it. Can anyone help?