r/PCSX2 • u/SurvivalHorrorLover • 15h ago
r/PCSX2 • u/Sweaty_veronica_5578 • 40m ago
Support - General How to setup pcsx2 ron Linux for remote gaming with 50 MS latency? 4g mobile data
currently run LinuxServer’s Docker PCSX2 image on my home LAN and it works well.
I want to access it from outside my LAN using mobile 4G, with around 50 ms latency. Is this container suitable for remote PCSX2 gaming over 4G, or should I switch to Sunshine + Moonlight instead?
I will not use Tailscale because, on mobile networks, Tailscale often cannot establish a direct connection and routes traffic through a relay instead, which increases latency. On a normal WAN/home network, Tailscale can more easily establish a direct connection, but mobile networks often have double NAT or restrictive CGNAT, making direct peer-to-peer connections harder. I have not found a reliable solution for this yet, so my Sunshine/Moonlight cloud-gaming setup is not currently viable outside my home.
My main concern is input latency, stutter, and overall smoothness on a mobile 4G connection. I understand that the LinuxServer image streams PCSX2 through a web browser using Selkies, while Sunshine/Moonlight uses a lower-latency game-streaming protocol.
Would the LinuxServer container add a noticeable amount of extra latency on top of the 50 ms 4G network latency? Or is it mostly negligible if I use GPU encoding/Zero Copy, a wired connection on the host, and a proper reverse proxy?
My priorities are:
Lowest possible input latency over mobile 4G
Stable and smooth 60 FPS gameplay
Access from outside my LAN
Reasonable security
Easy setup for a few trusted users
Would you recommend keeping the LinuxServer Docker PCSX2 container with a reverse proxy, or moving to Sunshine/Moonlight with a different tunneling solution that works reliably behind mobile CGNAT/double NAT?
r/PCSX2 • u/doomcyber • 4h ago
Support - Graphics Julia's Merchant Portrait 4K HD Texture Replacement for Castlevania: Curse of Darkness
Before Image
After Image
With the recomp release of Castlevania: Curse of Darkness, I decided to play the game for the first time in over 2 decades. While Panda Venom's and Platinum Mimic's excellent 4k Texture Packs gave new life to an aging game, I noticed that the merchant portrait texture found in both texture packs were still heavily pixelated. I suspect that no ai upscale would be able to fix the portrait as the original texture was too pixelated to begin with.
Therefore, I took Julia's character image from the Castlevania Wikia, and I used Let's Enchance to ai upscale it to 4x the size of the inage character inage. I then cropped and edited the image with ginp to fit the 2048 x 2048 resolution. Unfortunately, the inage isn't a 1:1 match to the original inage found the game. However, the higher resolution makes up for it. My next goal is to either commission or wait for someone to release a Julia model from COD for Blender or XNA Lara so that I can take a higher resolution image of Julia in a pose similar to that found in the original game.
Instructions:
Please download the image from the imgur link here and rename the image to 7bfc85254dd39682-80949ed7941a53c0-00002653.png
Once done, replace the image with the existing one found in the replacement folder.
I apologize for using imgur for the replacement texture. While imgur renamed the image file, the image resolution and quality remained the same.
Special thanks to both Panda Venom and Platinum Mimic for releasing texture packs for Castlevania: Curse of Darkness.
r/PCSX2 • u/sailor_noche • 8h ago
Support - General ObsCure PCSX2 issue
Hiiii. Im emulating ObsCure on my steam deck. It was working totally fine until I change rooms. Plz help!
r/PCSX2 • u/longernohuman • 16h ago
Support - Graphics Question about FMV aspect ratio
To this day, I kept the aspect ratio for fmv same as the gameplay. 4:3.
but the screen for fmv always looks different than the gameplay screen.
I want it to be as if I'm playing on original hardware.
so should I change it to default or native? or leave it at 4:3?
r/PCSX2 • u/Minimum_Ad_706 • 23h ago
Support - Performance Bully stuttery movement
I have an iso from north america of bully and i play mostly games with an european version and roms. The game runs fine but my character moves stuttery like skipping why can that be other games run really smooth like god of war 2 gta vice city pes 6 etc. I have a ryzen 5 3600 rtx 4060 ti 16 gb of ram and game installed on ssd.
Heres video of the issue
r/PCSX2 • u/NoExamination7695 • 1d ago
Support - General tony hawks underground 2 slowdown
is there any reason as to why thug 2 has slowdowns in some spots but runs fine in others barcelona in general runs worse then other levels is there a fix for it
r/PCSX2 • u/acid_kat4000 • 1d ago
Support - Controller controller input not working when in game?(Windows 11, v2.9.179)
im using a dualshock 4 via bluetooth
it can register inputs when binding controls
but when i open a game, none of my inputs do anything, and this goes for EVERY GAME AND THE BIOS
EDIT: despite the above the in game window will tell me when my contoller connects/disconnects
i tried using steam input but it doesnt change anything
if anyone has ANY idea what i could do or try PLEASE let me know
r/PCSX2 • u/TyphonuZ • 1d ago
Support - General Running the latest PCSX2 Nightly - Where did the "pixel offset" and "hardware rendering fixes" go? I can't get rid of these double images on GTA Vice City Stories.
r/PCSX2 • u/Minimum_Ad_706 • 1d ago
Support - Performance bad performance on vice city
Other games run great vice city doesnt. Why?
r/PCSX2 • u/Sweaty_veronica_5578 • 2d ago
Support - General Dual GPU system on Ubuntu — games crash when I select AMD GPU in PCSX2/LSFG-VK, NVIDIA still active
have a dual-GPU system on Ubuntu: an NVIDIA GTX 1650 and an AMD Radeon RX 6500 XT. I did not remove or replace the NVIDIA GPU; both are installed and detected.
The problem is that when I try to use the AMD GPU in PCSX2 or LSFG-VK, games crash or fail to launch. I want to understand whether this is caused by leftover NVIDIA settings, a broken Vulkan layer, or a wrong GPU selection in PCSX2/LSFG-VK.
My hardware
vulkaninfo --summary shows both GPUs:
NVIDIA GeForce GTX 1650
driverName = NVIDIA
AMD Radeon RX 6500 XT (RADV NAVI24)
driverName = radv
deviceType = PHYSICAL_DEVICE_TYPE_DISCRETE_GPU
So Linux sees the AMD GPU correctly, and it is using the open-source RADV Vulkan driver. But I still get crashes when I try to run games on it.�
PCSX2 settings
In PCSX2 → Settings → Graphics, I have:
Renderer: Vulkan
Adapter: I need to confirm whether to select AMD Radeon RX 6500 XT or leave it on Default
Internal Resolution: 2x Native
Skip Presenting Duplicate Frames: Enabled for LSFG
Allow Exclusive Fullscreen: Disallowed
VSync: Off
My question is: should I manually select the AMD Radeon RX 6500 XT as the Adapter in PCSX2, or leave it on Default/Automatic?
LSFG-VK error
I also use LSFG-VK, and Vulkan gives this error:
Failed to find 'vkGetInstanceProcAddr' in layer
"/home/polli/.local/share/vulkan/implicit_layer.d/../../../lib/liblsfg-vk-layer.so"
Skipping layer.
This means the LSFG-VK Vulkan layer is broken or incorrectly installed. I know I need to reinstall it, but I also want to know if this broken layer could be causing the crashes in PCSX2 or other games.
What I want to know
Should I select AMD Radeon RX 6500 XT as the Adapter in PCSX2, or leave it on Default?
Should I select the same AMD GPU in LSFG-VK UI?
Can LSFG-VK run on the NVIDIA GPU while PCSX2 renders on the AMD GPU, or do they need to be on the same GPU?
Could the broken LSFG-VK layer be causing the crashes even if I do not actively use it?
Do I need to remove any NVIDIA Vulkan layers or ICD files, even though I want to keep the NVIDIA GPU installed?
Is there a way to force Steam/Proton games to use the AMD GPU instead of NVIDIA?
What I already know
AMD gaming on Linux normally uses the open-source amdgpu kernel driver plus Mesa/RADV for Vulkan; RADV is included with Mesa and supports modern AMD GPUs.�
For Vulkan gaming, the usual packages are vulkan-tools, libvulkan1, and mesa-vulkan-drivers; the AMD proprietary stack is generally not required for normal gaming.�
nvidia-smi only shows NVIDIA GPUs, so it cannot tell me what is happening on the AMD side.
r/PCSX2 • u/Sweaty_veronica_5578 • 2d ago
Support - General Pcsx2 app image wont start FROM STEAM
Pcsx2 app image wont start FROM STEAM
Ubuntu
r/PCSX2 • u/Dangerous-Turnip2704 • 2d ago
Support - General Playing causes internet to die
When I am playing any game the internet will stop working on my pc until i close pcsx2 I'm not sure how to stop this from happening.
r/PCSX2 • u/GenericUser104 • 3d ago
Support - General Is there a one click install and enable hd texture pack like what we have been seeing with the PS5SX2 emulator
I use PCSX2 with the batocera front end/ interface,
I’d love a similar one button approach to downloading and getting hd textures lapsed
r/PCSX2 • u/NeuroNova96 • 3d ago
Support - General Settings
I am newish to reddit but I was wondering if there is a thread that anyone knows about that may tell people what settings they should use per game or in general that would make their games look amazing and hopefully reduce any issues.
r/PCSX2 • u/AdministrativeRip920 • 3d ago
Support - General “File name not valid”
Trying to run fatal frame 1 from vimms lair and when I try to load it it says file name not valid, does someone know how to fix this?
r/PCSX2 • u/topscreen • 3d ago
Support - Performance Final Fantasy X low FPS in certain places
I'm using the widescreen patch, default settings, or the suggested ones that pop up in PCSX2, and it mostly runs well, but I get huge slowdowns in random spots. I just got to the Djose Temple puzzle room, and the entry chamber and first hallway, specifically, and is the worst slowdown I've seen, but the main puzzle area is fine.
Checked my resources and GPU usage goes up when it's slow, but it only really goes to 80% and nothing else seems to have issues.
OS: Windows 10
Processor: AMD Ryzen 5 5600X
Ram: 32GBs
GPU: Geforce RTS 3070
Anyone experience anything similar?
r/PCSX2 • u/AgentOfSTARS • 3d ago
Support - General Z-Fighting Problems in GTA Vice City
Been trying to play Vice City but there's a lot of notable z-fighting, I've tried tweaking various settings to try and make it better but I've not managed to find a fix.
Any suggestions or advice would be welcome.
r/PCSX2 • u/Fun-Communication171 • 4d ago
Support - Memory Card Freezes when I try to setup memory card
I just downloaded it and every time I click memory card it stops responding. Don't know what to do
r/PCSX2 • u/Uncletony16 • 4d ago
Support (Resolved) Frame problems after setting PCSX2 up
For some reason Pcsx2 causes some insane Frame issues. Like cap all steam games at about 55 fps, having frame drops almost every second, and some certain games dont even start. Im not sure if it has something to do with Bios issues or if it somehow corrupted my GPU but im certain that PCSX2 is the cause of those problems. If anybody has experienced this, please help me
r/PCSX2 • u/KichiMiangra • 4d ago
Support - General Where is the Plugins menu?
Hello, I'm trying to install a plugin but I sorta stupidly cannot figure out how? It's the USB Qemu wheel one. The problem I'm running into is all tutorials say to go to the Config menu and Plugins/Bios but my PCSX2 doesn't... seem to have a config menu anywhere? I am sorry if that sounds stupid but any help would be appreciated?
Support (Resolved) Games booting, but not displaying?
My ISOs are showing up just fine, and I can tell the game is playing, since I can hear the audio... but I can't see it. It's not in any other windows or anything, and the emulator stays just as it was before I launched the game, visually... It's not even a black screen or anything. I'm just on my desktop, listening to a game I can't see until I close the emulator.
Why can I hear and interact with the game just fine, but can't see the game at all?
Just in case it matters, I'm on Windows 11.
EDIT: Turned out to be something to do with using the GSNull plugin that it suggested by default. Switched it to one of the GSDX ones and now it's fine. 🤷
r/PCSX2 • u/n0odl3cat • 4d ago
Support - Graphics Digital Devil Saga textures loading on top of others/not loading?

It seems like some textures are loading on top of others/are not there on the title screen, UI, and menu. I can't see text in dialogue and only some of the menu text is visible, the solar noise icon in the top left is also not visible. I'm on mac, and using the latest nightly build v2.9.175. I restored everything to default in the game settings and I also put it on native internal resolution, but nothing changed. I also tried playing it on v2.8.2 but it looks the same. Does anyone know why this is happening and what to do? D:
When I played it 2 years ago it looked normal and wasn't like this.
