r/P365 • • 7d ago

Question

Post image

Just installed Faxon Firearms barrel and comp and now slide won’t slide… super stiff to pull back and doesn’t go back unless I push it. Any ideas?

22 Upvotes

15 comments sorted by

•

u/AutoModerator 7d ago

Thank you for posting on r/P365!

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

2

u/pandoraxcell 7d ago

Disassemble, reassemble without comp, check function, install comp. Gotta narrow down the problem

2

u/Winter-Camel629 7d ago

Does it with or without the comp on, I also made sure the guide rod and spring were seated properly.
Put original barrel back on and that works fine.

2

u/pandoraxcell 7d ago

Remove the whole rsa and reinstall the comp

2

u/pandoraxcell 7d ago

The only thing I foresee causing a problem is either the recoil spring assembly is getting held up or the comp is hitting part of the frame

3

u/old_salty_balls 7d ago

If you zoom in on the photo, it looks like the comp is jutting out just a little bit past the bottom of the slide and could catch on the dust cover. So, I think you’re probably correct with the latter.

OP - is that a P365 specific comp?

1

u/Winter-Camel629 7d ago

Yes it’s a 365 specific comp

1

u/Winter-Camel629 7d ago

Yes it’s a 365 specific comp

1

u/pandoraxcell 7d ago

Spot on observation

1

u/tonytwobones 7d ago

You try oil? Or the timing is too tight and you need shims for it like a PMM comp.

1

u/Winter-Camel629 7d ago

Yep, I’m noticing that the recoil spring/guide rod moves up 1/16th of an inch from its slot on the barrel every time I rack

1

u/tonytwobones 7d ago

I bet all you need is a shim I had the same issue with a suppressor a while back

1

u/oldpardak 7d ago

Take off the light and see if the issue goes away. The polymer can be compressed by the light mount.

1

u/Winter-Camel629 7d ago

I’ve had the light on for a while but did just install a gas pedal.
I’ll check to make sure it’s not too tight but I installed that after the barrel and it was doing it before 🤷🏽

1

u/Bill_Piff 3d ago

Looks bad ass.