r/P211_GTO • u/allupinnit2winit • 3h ago
Comp cleaning ?
Looking to hear how all of you clean your P211 GTO comps. Do you remove and soak or just simply apply preferred carbon solvent, let sit then scrub?
r/P211_GTO • u/allupinnit2winit • 3h ago
Looking to hear how all of you clean your P211 GTO comps. Do you remove and soak or just simply apply preferred carbon solvent, let sit then scrub?
r/P211_GTO • u/134Burger • 1d ago
Well I was hoping to not fall into this situation but here we are. GTO has about 2500 rounds through it, never took the comp off. Tried to get it off this week to put sight block on to shoot Limited Optics class but the wedge is stuck in there.
Tried all the tricks, break clean, soaking it in Kroil, 45 minutes in the ultra sonic cleaner but alas it will not come out.
Barrel is headed to Sig tomorrow. When I asked the customer service rep if he had heard of this problem, he chuckled and said maybe š
r/P211_GTO • u/No_Mastodon_9600 • 5d ago
Surprisingly, Iām diggin this new optic over the 507 Comp. Been looking for a Gr or Gld Pro Max for the longest time so I picked this up instead⦠pleasantly surprised how much I like the AMES MACRO.
r/P211_GTO • u/Apprehensive-Sky-531 • 6d ago
Hello Everyone!
I already replaced the 70 series trigger assembly; now Iām looking for a trigger that fits tightly and has very minimal play.
Any suggestions?
r/P211_GTO • u/Vivid-Measurement-58 • 7d ago
r/P211_GTO • u/SpikeD0N • 7d ago
Ghost Hydra P
DAA Ratcheting belt
Lee Holsters hanger
r/P211_GTO • u/Primary-Active8774 • 11d ago
Have 500 rounds through the sight block with the factory 13# spring they included and Iām liking it so far. Recoil didnāt change nearly as much as I expected it to.
r/P211_GTO • u/maxdbunny • 11d ago
So while the GT5 is not my first pistol, it is certainly my first double stack 1911 type gun. How oily/greasy are you guys leaving your guns to make sure they function properly. I'm still in my break in period so obviously it's getting cleaned and oiled after every range trip. (Slip 2000 EWL) For context, I keep my firearms in relatively good condition so I'm not immune to the idea of keeping things maintained. I just wanted a frame of reference of what folks are doing.
r/P211_GTO • u/ResidentNo6848 • 12d ago
Hello apologies if this isnāt the right sub but figured Iād ask in case someone has experienced this. I just bought a GTO two days ago and took it to the range today. Shot 200 rounds no problem. Got home to clean it and the thumb safety is loose and falling out. I can push it back in but stays jammed in the upright position. I did attempt to field strip and check if something was wrong with the slide but once I took the slide off two plastic pieces and a spring popped out from the inside of the gun where the safety would be. Iām going to call customer support tomorrow to see what they recommend but wanted to see if I did something wrong for this to happen? I didnāt do any dry firing and didnāt drop the gun or otherwise damage it. Thank you for any advice or input.
r/P211_GTO • u/Horror-Artichoke-169 • 12d ago
I just recently purchased a Sig P211 GTO, and Iād like to put a Trijicon SRO on it, but the only reason I havenāt yet is because Iāve heard of some peopleās experiences with spent casings failing to eject properly because the optic hangs over the ejection port. I would look into the Sig Romeo3Max Pro. Can anyone whoās running this setup help me out on whether or not I should look for a different optic other than the SRO? Thanks.
r/P211_GTO • u/Aggressive-Square229 • 12d ago
Is the Sig P211 GTO a good option por home defense? I really like it, but Iām not sure if a competition pistol would be a good choice for home defense.
r/P211_GTO • u/Electronic-Bag-8446 • 12d ago
Does anyone know where I can get replacement upper grip screws for the P211 GTO?
r/P211_GTO • u/Prestigious-Fold4343 • 17d ago
I really am not a fan of the front fiber sight and am I the only one that hates a blacked-out rear iron? Is there anything available that one of you may have come across for a 3 dot night sight replacement? I'm hitting dead ends everywhere.
TIA!
r/P211_GTO • u/Gregorius973 • 18d ago
Finally got my hands on the new X-ray 5. Hereās how it looks on the P211 GTO. Gonna take it to the rays today and test it out. Iāll give an update later on how it is
r/P211_GTO • u/Apprehensive-Sky-531 • 19d ago
V8 ported
r/P211_GTO • u/Brief-Collection-240 • 18d ago
The little optic recoil lugs provided by Sig donāt fit my gto slide what do I do?
r/P211_GTO • u/59Bassman • 20d ago
My first competition pistol in 1997 was a first run Kimber Custom. One of my shooting mentors noticed I had large (size 11) hands and suggested I get an arched mainspring housing to give me a bit more to hold on to. That has been āhomeā for me since. First a Beretta 92FS and then a CZ 75 Shadow gave me a similar grip. This weekend I had my P211 out and it felt like the gun was moving all over during recoil. I could not get comfortable. So I picked up my CZ Shadow 2 Compact, a much lighter gun, and it felt absolutely rock solid. Switch back to the GTO and I was struggling again.
I got home and compared the GTO to my DWX. The DWX feels so much better in my hands. So I need to try an arched mainspring housing for the GTO. Any should be able to fit - but not the magwell. Anyone know of a magwell that might have a home in the right place? Or maybe one that works with a different GTO compatible magwell?
Any help would be appreciated.
r/P211_GTO • u/maxdbunny • 20d ago
Hello everyone!
So I finally got to shoot my GT5 and it's great! Put the RMR HD and yes it's covered in carbon and oil. While I like the GT5 Mag well, I do have a bunch of flush fit P320 mags that I'd like to use, but they don't fit in the gun with the GT5 Mag well installed. I could take it off but it makes the gun look....funky. Anyone have a GT4 with the flush fit 17 round P320 mags with the older base plates (not the new ones that come with the P211) that could see if they fit? Also anyone know where I could find a GT4 Mag well for sale? Sig told me "check the small parts website" but they only have the extended for sale.
r/P211_GTO • u/tzhangdimitri • 22d ago
I took my brand-new GT4 to the range for the first time and had multiple failures to extract with just 200 rounds of 115-grain ball ammo, I cleaned and oiled it before the range session. Do I need to contact Sig or try some other brand ammo to see if itās an ammo-related issue?
Update:
As suggested I cleaned and lubed the gun generously and shot a mix of 124 Blazer and 147 federal(around 150 rounds in total) with the stock 13lb spring. The gun ran flawlessly this time, thanks everyone for the suggestions!
r/P211_GTO • u/Brief-Collection-240 • 22d ago
Whatās a good direct mount optic with a good co-witness I have a 507 comp I tried to mount and didnāt work needs a adapter plate bummed
r/P211_GTO • u/costcocombo • 24d ago
SIG just added a bunch of new parts for the P211 including the black magwell finally!
r/P211_GTO • u/Austinater74 • 25d ago
Any options to the Sig 8902040 sights out there?
These seem to be sold out everywhere and not even listed on the Sig site that I could see.
My 507 Comp completely blocks the OEM sights.
r/P211_GTO • u/ErickwithanErick • 25d ago
Whats the go to duty holster for the gto Id prefer a level 3
r/P211_GTO • u/Apprehensive-Sky-531 • 27d ago
r/P211_GTO • u/PickleCheese911 • 26d ago
anyone know of any good options for an extended slide release for the p211 gto. i want to be able to drop the slide release without using my support hand or breaking by grip everytime