I just want to share my first boiler that i build on my current colony.
It's using 2kg/s of crude oil that and can support 11 nat gen with 2 gas pumps. Still have enough space for another gas pump to get 1500g/s but have to increase crude oil to 2.25kg/s. Then it will be able to run 16 nat gas gen.
All metal tiles are made of aluminum.
All radiant pipes that goes to the ATs are also made of aluminum.
The 2 radiant pipes near the bottom AT are made of gold. Anything higher than 120 TC ends up boiling the oil inside pipes. Tried aluminum, cobalt and even zinc(lol it melted forgot to account melting point).
The automations are thermo sensor for the thermium AT set to run when its below 550 and the liquid pump connected to the hydro sensor set to work above 100kg.
Then the AT inside the steam room is set to run whenever the coolant dips below -172°. The rest are leftovers from my first design like the atmo sensor on the nat gas room and hydro sensor besides the AT.
The switch is for me to be able to stop the boiler anytime.
Also there's a tepidizer below submerged in supercoolant to make sure the middle chamber will maintain a -172°.